SAMA V Play-B ATX PC Case Instruction Manual

Introduction

The SAMA V Play-B is a full tower ATX PC case designed for gaming and high-performance computing. It features an integrated 8-inch LED display on the front panel, three pre-installed 120mm PWM ARGB fans, and a modern I/O panel including Type-C USB 3.2. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your SAMA V Play-B PC case.

The chassis comes with the LCD screen pre-connected from the factory, eliminating the need for manual Type-C interface connection for the display. The iron mesh front panel enhances heat dissipation, and the LED display allows for customization of background pages using dedicated software.

Setup

1. Unpacking

Carefully remove the PC case from its packaging. Inspect for any damage that may have occurred during transit. Retain all packaging materials for future transport or warranty claims.

2. Component Installation

The SAMA V Play-B case supports ATX, Micro-ATX, and Mini-ITX motherboards. Ensure all components are compatible with the case dimensions before installation.

• Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
• Maximum VGA Card Length: 395mm
• Maximum CPU Cooler Height: 185mm
• Power Supply Unit (PSU) Length: Up to 230mm
• PCI Expansion Slots: 7

Drive Bay Configuration:

The case supports flexible storage configurations:

• 1 x 2.5-inch SSD
• 2 x 3.5-inch HDDs
• Alternatively, 2 x 2.5-inch SSDs and 1 x 3.5-inch HDD can be installed.

Image: Internal layout highlighting locations for 2.5-inch SSDs, 3.5-inch HDDs, PCI slots, and the power supply unit (PSU) area. The image indicates 7 PCI slots and a maximum PSU length of 230mm.

Fan and Liquid Cooler Installation:

The case comes with three 120mm ARGB fans pre-installed (two at the front, one at the rear). Additional cooling options are available:

• Front: Supports 3 x 120mm or 3 x 140mm fans, or 240/280/360mm liquid coolers.
• Top: Supports 3 x 120mm or 2 x 140mm fans, or 240/280/360mm liquid coolers.
• Rear: Supports 1 x 120mm or 1 x 140mm fan, or 120mm liquid cooler.
• Power Supply Shroud: Supports 3 x 120mm fans.

Image: A detailed diagram illustrating the various fan and liquid cooler mounting positions within the SAMA V Play-B chassis, including front, top, rear, and power supply shroud areas, with supported fan sizes and radiator dimensions.

Image: The SAMA V Play-B PC case showcasing its three pre-installed 120mm ARGB fans (two front, one rear) and overall dimensions: 430mm (depth), 230mm (width), and 440mm (height).

3. Front Panel I/O Connection

Connect the front panel cables to your motherboard according to your motherboard's manual. The I/O panel provides convenient access to essential ports:

• 2 x USB 3.0 ports
• 1 x Type-C 3.2 Gen 2 port (10 Gbps)
• HD Audio port
• Microphone interface
• Power button
• LED Control button

Image: A close-up view of the modern front I/O panel, detailing the Type-C 3.2, USB 3.0 ports, microphone and audio jacks, LED control button, and power button.

4. LED Screen Software Installation

The 8-inch LED display requires specific software for customization and functionality. The chassis's LCD screen is pre-connected. Download the necessary software using the links below:

• Google Drive Link for Software
• Microsoft OneDrive Link for Software

Install the software on your operating system to manage the display's background, themes, and system monitoring features.

Image: The SAMA V Play-B PC case with its 8-inch LED screen showing the 'SAMA_Multi' software interface for theme and background customization. Key screen specifications are also displayed: 8-color TFT-LCD, 1280x800 resolution, 16:10 aspect ratio, 16.7 million colors, 60Hz refresh rate, and 189ppi.

Operating Instructions

1. Power On/Off

Press the power button on the front I/O panel to turn your system on or off. A short press typically initiates power on, while a longer press may initiate a shutdown sequence, depending on your operating system settings.

2. LED Screen Operation

Once the SAMA_Multi software is installed and running, you can customize the 8-inch LED display. The software allows you to change background images, themes, and potentially display system statistics such as CPU temperature, RAM usage, and time.

• Customization: Use the installed software to select and apply different themes or upload custom images/videos for the display background.
• Brightness: Adjust the screen brightness through the software settings.

3. ARGB Fan Control

The pre-installed ARGB fans are connected to a control box. Use the dedicated LED Control button on the front I/O panel to cycle through various lighting effects and colors. For more advanced customization, connect the control box to your motherboard's ARGB header and use motherboard-specific software (if compatible).

Maintenance

1. Cleaning

Regular cleaning helps maintain optimal performance and airflow. Use a can of compressed air to remove dust from fan filters, fan blades, and internal components. Wipe exterior surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.

2. Side Panel Removal

The tempered glass side panel features a magnetic, screwless design for easy access to internal components. To remove:

1. Gently open the side panel outwards.
2. Lift the side panel upwards to detach it from its hinges.

Re-attach by aligning the hinges and closing the panel until the magnets secure it.

Image: An illustration demonstrating the two-step process for removing the magnetic, hinged tempered glass side panel: first, open the panel, then lift it off its hinges.

Troubleshooting

1. LED Screen Not Displaying After Restart

If the 8-inch LED screen does not display content after a system restart, follow these steps:

1. Ensure the SAMA_Multi software is running.
2. Within the SAMA_Multi software, locate an option such as "Exit the software and shut the device" or similar. Select this option.
3. Restart your PC again. The screen should re-engage.
4. If the issue persists, try completely powering off the PC (including the power supply switch) and then restarting.

This behavior may be related to software driver initialization and often requires specific interaction with the display software after a reboot.

2. Fans Not Spinning or ARGB Not Working

• Check Connections: Ensure all fan power cables and ARGB cables are securely connected to the control box and/or motherboard headers.
• Power Supply: Verify that the fan control box is receiving power from the PSU.
• Software/Button: Use the LED Control button on the front panel to cycle through effects. If connected to the motherboard, check your motherboard's ARGB software.

3. General System Instability

• Cable Management: Ensure all internal cables are neatly routed and not obstructing airflow or interfering with components.
• Component Seating: Verify that all components (GPU, RAM, storage drives) are properly seated in their respective slots.
• Cooling: Confirm that all fans are spinning and that there is adequate airflow within the case. Refer to the cooling potential diagram for optimal airflow.

Image: A visual representation of the superior cooling potential of the SAMA V Play-B case, showing multiple airflow channels and support for up to 12 fan mounting positions, compatible with 240/280/360mm water cooling configurations.

Specifications

Image: An internal view of the SAMA V Play-B case illustrating maximum component clearances, including 395mm for VGA cards and 185mm for CPU coolers, along with overall case dimensions.

Warranty and Support

For warranty information and technical support, please refer to the official SAMA website or contact your retailer. Keep your proof of purchase for any warranty claims.