1. Introduction
Figure 1.1: The Voltex Type C Folding Arrow Board Trailer, showcasing its 25-light LED display and robust trailer frame.
The Voltex Type C Folding Arrow Board Trailer (Model VT9648T) is a specialized traffic control device designed for deployment at construction sites, road work zones, and other areas requiring clear traffic guidance. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your arrow board trailer.
The unit features a 96"L x 48"H liquid-resistant LED display with 25 high-intensity lights, ensuring visibility in various weather conditions. It is built for durability and ease of deployment, making it an essential tool for maintaining a safe and organized work environment.
2. Safety Information
Read all safety warnings and instructions before operating this equipment. Failure to follow these instructions may result in serious injury or property damage.
- General Safety: Always ensure the trailer is on stable, level ground before deployment. Use wheel chocks to prevent unintended movement.
- Electrical Safety: Do not attempt to service electrical components unless qualified. Ensure all connections are secure and free from damage. Keep the battery compartment sealed.
- Deployment Safety: Be aware of surroundings when raising or lowering the arrow board. Ensure no personnel or obstacles are in the path of moving parts.
- Traffic Safety: Position the arrow board trailer in accordance with local traffic control regulations and guidelines (e.g., MUTCD). Ensure visibility is not obstructed.
- Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
3. Package Contents
Verify that all components are present and undamaged upon receipt.
- Voltex Type C Folding Arrow Board Trailer (Fully Assembled)
- Wireless Remote Control Unit
- Battery Charger
- Hardware tools for bolts
- Operation Manual (this document)
- Four Swivel Jacks (2000 lbs capacity each)
- Hitch Chains
- Locking Pin
- GPS Tracker (pre-installed)
4. Setup and Deployment
Follow these steps for proper setup and deployment of the arrow board trailer.
4.1 Trailer Positioning
- Transport the trailer to the desired location. The trailer features a 2-inch standard ball hitch with DOT tail lights and connection wire.
- Once positioned, engage the parking brake if available and place wheel chocks on both sides of the tires to prevent movement.
Figure 4.1: Voltex Arrow Board Trailer deployed in a road work zone, demonstrating its use for traffic control. A "Lane Closed" sign is visible in the foreground.
4.2 Stabilizing the Trailer
- Utilize the four swivel jacks (2000 lbs capacity each) located at the corners of the trailer. Extend them until the trailer is stable and level.
- Ensure the trailer is firmly supported to prevent tipping, especially in windy conditions.
4.3 Deploying the Arrow Board
- The arrow board is raised and lowered using the integrated 1200lb winch system.
- Carefully operate the winch to raise the display panel to its deployed position. The display height in travel position is 90 inches, and in deployed position, it is 122 inches high.
- Ensure the board is securely locked in the upright position before operation.
Figure 4.3: Side view of the Voltex Arrow Board Trailer showing the display board in its fully deployed and raised position, ready for operation.
Figure 4.4: Side view of the Voltex Arrow Board Trailer with the display board folded down, illustrating its compact configuration for transport or storage.
5. Operating Instructions
The Voltex Arrow Board Trailer is operated via a wireless remote control unit.
5.1 Powering On/Off
- Ensure the main power switch on the trailer is in the "ON" position.
- The system is powered by two 12V/50AH sealed, maintenance-free batteries, concealed within the sign.
- The display features an automatic photosensor for daylight and night dimming, adjusting brightness as needed.
5.2 Using the Wireless Remote Control
The remote control allows selection of various display patterns.
Figure 5.1: The wireless remote control unit used to select and activate display patterns on the arrow board.
- Turn on the remote control. It will attempt to establish a wireless connection with the arrow board.
- Select the desired arrow pattern from the available options on the remote control. The display supports up to 12 patterns.
- The system has a previous memory function, recognizing the last set pattern even after powering off.
Figure 5.2: Examples of the various arrow and warning light patterns that can be displayed on the Voltex Arrow Board, including directional arrows and caution signals.
6. Maintenance
Regular maintenance ensures the longevity and reliable operation of your Voltex Arrow Board Trailer.
- Cleaning: Periodically clean the LED display panel and solar panels with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners.
- Battery Charging: Although the batteries are maintenance-free and charged by the 18V/60W top-mounted solar panels, use the included battery charger for supplemental charging if the trailer is stored for extended periods or experiences low sunlight.
- Structural Inspection: Regularly inspect the trailer frame, hitch, jacks, and winch system for any signs of wear, damage, or corrosion. Tighten any loose bolts.
- Tire Pressure: Check tire pressure regularly to ensure proper inflation for safe towing. The tire size is 165/70R13.
- LED Inspection: Verify all 25 LEDs are functioning correctly. While the display is liquid-resistant, ensure no water ingress is visible.
Figure 6.1: Top view of the Voltex Arrow Board Trailer, highlighting the 18V/60W solar panel mounted at a fixed angle, which charges the internal batteries.
7. Troubleshooting
This section addresses common issues you may encounter with your arrow board trailer.
| Problem | Possible Cause | Solution |
|---|---|---|
| Display not lighting up. |
|
|
| Remote control not responding. |
|
|
| Display patterns are incorrect or erratic. |
|
|
8. Specifications
Detailed technical specifications for the Voltex Type C Folding Arrow Board Trailer.
| Feature | Detail |
|---|---|
| Model Number | VT9648T |
| Display Dimensions (L x H x D) | 96" x 48" x 3" |
| Overall Trailer Dimensions (L x W x H) | 110 x 96 x 122 inches (deployed) |
| Display Height (Travel Position) | 90 inches |
| Display Height (Deployed Position) | 122 inches |
| Number of LEDs | 25 (high-intensity, fully sealed, 150 mm standard pole) |
| Power Source | 2 x 12V/50AH sealed, maintenance-free batteries |
| Solar Panel | 18V/60W (top mounted at fixed angle) |
| Winch System | 1200 lb capacity |
| Jacks | Four swivel jacks, 2000 lbs capacity each |
| Axle Capacity | 1927 lbs (tubular axle) |
| Tire Size | 165/70R13 (4-hole, 4.5-inch bolt circle pattern) |
| Material | Main carbon steel construction, plastic components |
| Finish | Powder-coated |
| Weight | 948 pounds |
| Special Features | Waterproof, Automatic photosensor dimming, GPS Tracker, Previous memory for last setting pattern recognition system |
| Compliance | Meets Standards Compliance MUTCD C & Visibility At least 1 mile |
| UPC | 659675954875 |
9. Warranty and Support
Warranty: The Voltex Type C Folding Arrow Board Trailer comes with a 1-year limited warranty.
For technical support, parts, or warranty claims, please contact Voltex customer service. Refer to your purchase documentation for contact details or visit the official Voltex website.