TIMESS Analog Alarm Clock PT836 User Manual

Introduction

Thank you for choosing the TIMESS Analog Alarm Clock PT836. This compact and silent alarm clock is designed for reliable timekeeping and gentle wake-up. It features a non-ticking quartz movement, a snooze function, and an on-demand night light. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

Safety Information

• Keep the clock away from water and high humidity to prevent damage.
• Avoid exposing the clock to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the clock yourself. Refer to qualified service personnel.
• Dispose of used batteries responsibly according to local regulations.
• Keep batteries out of reach of children.

Package Contents

• 1 x TIMESS Analog Alarm Clock PT836 (Green)
• 1 x User Manual

Product Overview

Familiarize yourself with the various parts of your TIMESS Analog Alarm Clock:

Image: Back view of the TIMESS Analog Alarm Clock PT836, highlighting the Speaker, Alarm ON/OFF switch, Alarm Set knob, Time Set knob, Battery Compartment, and Snooze/Light button.

1. Time Set Knob: Used to adjust the current time.
2. Alarm Set Knob: Used to set the desired alarm time.
3. Alarm ON/OFF Switch: Slides to activate or deactivate the alarm.
4. Snooze/Light Button: Press for temporary light or to activate snooze when the alarm sounds.
5. Battery Compartment: Holds one AA battery.
6. Speaker: Emits the alarm sound.

Setup

1. Battery Installation

1. Open the battery compartment cover on the back of the clock.
2. Insert one (1) AA battery (not included), ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Close the battery compartment cover securely.

2. Setting the Time

1. Locate the Time Set Knob on the back of the clock.
2. Rotate the knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.

3. Setting the Alarm

1. Locate the Alarm Set Knob on the back of the clock.
2. Rotate the knob to move the alarm hand to your desired wake-up time.
3. Ensure the Alarm ON/OFF Switch is in the 'ON' position to activate the alarm.

Operating Instructions

1. Alarm ON/OFF

• To turn the alarm ON, slide the Alarm ON/OFF Switch to the 'ON' position.
• To turn the alarm OFF, slide the Alarm ON/OFF Switch to the 'OFF' position.

2. Snooze Function

• When the alarm sounds, press the Snooze/Light Button on top of the clock.
• The alarm will temporarily stop and sound again after approximately 5 minutes.
• To fully turn off the alarm, slide the Alarm ON/OFF Switch to the 'OFF' position.

3. Night Light Function

Image: A hand pressing the Snooze/Light button on the top of the clock, illuminating the clock face for nighttime viewing.

• To illuminate the clock face for nighttime viewing, press and hold the Snooze/Light Button on top of the clock.
• The light will remain on as long as the button is pressed and will turn off when released to conserve battery power.

Maintenance

Cleaning

• Wipe the clock with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish.

Battery Replacement

• When the clock starts to lose time or the alarm becomes weak, it is time to replace the battery.
• Follow the battery installation steps outlined in the Setup section.
• Always use a fresh AA battery.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please contact the manufacturer directly through their official website or the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.