JBL PartyBox 710
JBL PartyBox 710 Speaker User Manual
Model: JBL PartyBox 710
Brand: JBL
1. Introduction
Welcome to the JBL PartyBox 710 user manual. This guide provides essential information for setting up, operating, and maintaining your JBL PartyBox 710 speaker and its accompanying wireless microphones. Please read this manual thoroughly to ensure proper use and to maximize your audio experience.
2. Important Safety Instructions
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3. What's in the Box
Ensure all items listed below are present in your package:
- 1 x JBL PartyBox 710 Speaker
- 2 x JBL PartyBox Wireless Microphones
- 1 x Wireless Microphone Receiver
- 1 x AC Power Cord
- 1 x Quick Start Guide
- 1 x Safety Sheet
- 1 x Warranty Card

Image: The JBL PartyBox 710 speaker shown alongside its two wireless microphones and the compact receiver.
4. Product Overview
4.1 PartyBox 710 Controls and Connections
The JBL PartyBox 710 features an intuitive control panel on its top surface and various input/output ports on the rear for versatile connectivity.

Image: A detailed view of the JBL PartyBox 710's top control panel, showing buttons for volume, bass, treble, echo, light modes, and bass boost. A wireless microphone is positioned on the speaker's top surface.
Top Panel Controls:
- Volume Knob: Adjusts the master volume of the speaker.
- Bass/Treble/Echo Knobs: Fine-tune the audio output for connected microphones.
- Light Mode Button: Cycles through various light show patterns and colors.
- Bass Boost Button: Enhances low-frequency audio for deeper bass.
- Play/Pause Button: Controls audio playback.
- Bluetooth Button: Initiates Bluetooth pairing mode.
Rear Panel Connections:
- AC Power Input: Connects the speaker to a power outlet.
- USB Port: For USB playback or charging external devices.
- AUX Input: 3.5mm jack for connecting external audio sources.
- Mic/Guitar Inputs (x2): 6.35mm jacks for connecting wired microphones or guitars.
4.2 Wireless Microphones
The included wireless microphones are designed for clear vocal reproduction and seamless integration with the PartyBox 710.

Image: The two JBL PartyBox Wireless Microphones are displayed along with their compact black receiver unit.
Microphone Features:
- Power Button: Turns the microphone on/off.
- LED Indicator: Shows power status and battery level.
- Cardioid Pickup Pattern: Focuses on sound directly in front of the mic, reducing background noise.
- Pop Filter: Minimizes plosive sounds for clearer vocals.
5. Setup
5.1 Powering On the PartyBox 710
- Connect the supplied AC power cord to the AC power input on the rear of the PartyBox 710.
- Plug the other end of the power cord into a suitable wall outlet.
- Press the Power button on the top panel of the speaker to turn it on. The speaker will emit a power-on sound and the light show will activate.
5.2 Connecting Wireless Microphones
The wireless microphones are designed for easy plug-and-play operation with the PartyBox 710.
- Locate the wireless microphone receiver.
- Insert the receiver into one of the 6.35mm Mic/Guitar inputs on the rear of the PartyBox 710.
- Turn on each wireless microphone by pressing its Power button. The LED indicator on the microphone will illuminate.
- The microphones should automatically pair with the receiver. If not, refer to the troubleshooting section.

Image: A JBL PartyBox Wireless Microphone is shown being inserted into the designated microphone input jack on the rear panel of the PartyBox 710 speaker.
5.3 Initial Audio Connection
You can connect audio sources to the PartyBox 710 via Bluetooth, AUX, or USB.
- Bluetooth: Press the Bluetooth button on the top panel. The button will flash, indicating pairing mode. Select "JBL PartyBox 710" from your device's Bluetooth list.
- AUX: Connect an audio cable (not included) from your device's headphone jack to the AUX input on the rear of the speaker.
- USB: Insert a USB drive containing audio files into the USB port on the rear. The speaker will automatically begin playing supported audio formats.
6. Operation
6.1 Audio Playback
Once an audio source is connected, use the controls on the PartyBox 710 or your connected device to manage playback.
- Use the Volume Knob to adjust the overall sound level.
- Press the Play/Pause Button to start or stop music.
- Press the Bass Boost Button to activate or deactivate the enhanced bass feature.
6.2 Light Show Control
The PartyBox 710 features a dynamic light show that can be customized to your preference.

Image: The JBL PartyBox 710 speaker is shown outdoors near a pool, displaying its vibrant, customizable light show that synchronizes with the music, creating a party atmosphere.
- Press the Light Mode Button repeatedly to cycle through different light patterns and colors.
- Some light modes react to the beat of the music, enhancing the party experience.
6.3 Karaoke Function
Utilize the wireless microphones for karaoke or public speaking.
- Ensure the wireless microphone receiver is connected and microphones are powered on.
- Use the Bass, Treble, and Echo Knobs on the top panel to adjust the microphone's sound to your liking.
- Speak or sing into the microphone, ensuring it is pointed towards your mouth for optimal sound capture.
7. Maintenance and Care
Proper care will extend the life and performance of your JBL PartyBox 710.
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care (Microphones): For optimal battery life, fully charge the microphones before first use and at least once every 3 months if not used regularly.
- Water Resistance: The PartyBox 710 is splashproof (IPX4 rated), meaning it can withstand splashes of water. Do not submerge the speaker in water or expose it to heavy rain. Ensure all port covers are securely closed when near water.
8. Troubleshooting
If you encounter issues with your PartyBox 710, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Power cord not connected properly or no power from outlet. | Ensure power cord is securely plugged into both the speaker and a working wall outlet. Try a different outlet. |
| No sound from speaker. | Volume too low, incorrect input selected, or source device issue. | Increase speaker volume. Check if the correct input (Bluetooth, AUX, USB) is active. Ensure the source device's volume is up and it's playing audio. |
| Microphones not working. | Microphones not powered on, receiver not connected, or mic volume/echo knobs are low. | Ensure microphones are charged and powered on. Verify the receiver is fully inserted into a mic input. Adjust the Mic Volume, Bass, Treble, and Echo knobs on the speaker's top panel. |
| Bluetooth pairing issues. | Speaker not in pairing mode, device too far, or interference. | Press the Bluetooth button on the speaker to enter pairing mode. Move your device closer to the speaker. Turn off other Bluetooth devices to reduce interference. |
| Light show not working. | Light show feature is off or in a static mode. | Press the Light Mode button to cycle through different light patterns and ensure it's not set to off. |
9. Specifications
Key technical specifications for the JBL PartyBox 710 Speaker:
| Feature | Detail |
|---|---|
| Output Wattage | 800 Watts |
| Power Source | AC Powered (Speaker), Battery Powered (Microphones) |
| Connectivity Technology | Bluetooth, AUX, USB |
| Connector Type | Auxiliary, USB |
| Number of Channels | 2 |
| Audio Input | Microphones, AUX |
| Color | Black or Dark Gray |
| Mounting Type | Floor Standing |
| Microphone Battery Life | Up to 20 hours |
10. Warranty and Support
JBL products are designed to provide years of reliable performance. For detailed warranty information specific to your region and product, please refer to the warranty card included in your package or visit the official JBL website.
For technical support, service, or further inquiries, please contact JBL customer service through their official channels. You can find contact information and frequently asked questions on the JBL Official Store on Amazon or the main JBL website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







