EPLO iX7 MT Smart Toilet Instruction Manual

1. Introduction

Thank you for choosing the EPLO iX7 MT Smart Toilet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new smart toilet. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

• Ensure the electrical outlet is a Ground Fault Circuit Interrupter (GFCI) type to prevent electrical shock.
• Do not splash water directly onto the toilet's electrical components.
• Do not use chemical reagents or abrasive cleaners on the seat, as this may cause discoloration or damage to the antibacterial coating. Use a damp cloth for cleaning.
• This product is designed for indoor use only.
• Children and individuals with reduced physical, sensory, or mental capabilities should be supervised when using the appliance.

3. Package Contents

Verify that all components are present before beginning installation:

• 1x EPLO iX7 MT Smart Toilet
• 1x Remote Control
• 1x Sealing Wax Ring
• 1x Flange
• 1x Three-Way Angle Valve
• 1x Set of Mounting Kits
• 1x Installation Cardboard Template
• 1x User Manual (this document)

4. Product Features

The EPLO iX7 MT Smart Toilet offers a range of advanced features for enhanced comfort and hygiene:

• Integrated Bidet Functions: Includes heated seat, instant warm water for nozzle, adjustable high-speed warm dryer, female wash, and rear wash.
• Automatic Flushing: Features off-seat auto flushing, side button flushing, foot kick flushing, and remote control flushing. A built-in backup battery allows flushing during power outages.
• Siphonic Jet Flush Technology: Provides powerful and efficient flushing with 1.28 gallons per flush (GPF).
• Foam Dispenser: Creates a foam shield in the bowl to isolate odor, prevent splashing, and reduce bacterial spread.
• UVC Cleaning: Utilizes UVC light to clean water before bidet use, ensuring hygiene.
• Heated Seat & Night Light: The seat offers adjustable temperature settings, and a photosensitive night light guides you in the dark, automatically activating in low light conditions.
• LED Temperature Display: Clearly indicates water, seat, and air temperatures.
• Soft Close: The lid and seat close gently to prevent slamming.
• ADA Comfort Height: Designed at a comfortable 17-inch height for ease of sitting and standing.
• Certifications: CUPC and ETL listed, meets CEC Minimum Efficiency Standards, and Japanese SIAA Certified for hygienic seat coating.

Figure 1: EPLO iX7 MT Smart Toilet with remote control.

Figure 2: The Foam Shield feature helps isolate odor, prevent splashing, and is anti-stick.

Figure 3: UVC cleaning system purifies water before bidet use, ensuring hygiene.

Figure 4: The foot kick sensor allows for hands-free lid opening and flushing.

Figure 5: Enjoy the comfort of a heated seat and the convenience of a night light.

Figure 6: The high-speed dryer offers adjustable temperature and speed for efficient drying.

Figure 7: Diagram illustrating the Siphonic Jet Flushing Technology for powerful waste removal.

Figure 8: The iX7 MT supports kick flush and off-seat auto flush, with blackout flush capability.

5. Installation

Proper installation is crucial for the optimal performance and safety of your EPLO iX7 MT Smart Toilet. It is recommended to have a qualified plumber perform the installation.

5.1 Pre-Installation Checks

• Ensure a standard 12-inch rough-in measurement from the wall to the center of the drain pipe.
• Verify the presence of a GFCI (Ground Fault Circuit Interrupter) electrical outlet near the installation area.
• Confirm water pressure is at least 35 PSI for optimal flushing performance.

5.2 Installation Steps

1. Prepare the Floor: Clear the installation area and ensure the floor is clean and level.
2. Install Flange and Mounting Kits: Secure the flange to the drain pipe and install the mounting bolts and brackets as per the provided template.
3. Attach Wax Ring: Carefully place the sealing wax ring onto the bottom of the toilet.
4. Position the Toilet: Align the toilet with the mounting bolts and gently lower it into place, ensuring a tight seal with the wax ring.
5. Connect Water Supply: Use the provided three-way angle valve to connect the toilet to your water supply line.
6. Connect Power: Plug the toilet into the GFCI electrical outlet.

Figure 9: Detailed dimensions of the EPLO iX7 MT Smart Toilet, including seat height and rough-in requirements.

6. Operating Instructions

Your EPLO iX7 MT Smart Toilet can be operated using the remote control, side buttons, or the foot kick sensor.

6.1 Remote Control Functions

The remote control provides access to all smart toilet features:

• Flush: Initiates a full flush.
• Rear Wash / Moving: Activates the rear bidet wash. Press again for oscillating movement.
• Front Wash / Moving: Activates the feminine bidet wash. Press again for oscillating movement.
• Dryer: Activates the warm air dryer. Adjustable speed and temperature.
• H/C Massage: Alternates between hot and cold water for a massage effect (10s hot, 5s cold).
• Night Light: Toggles the night light on/off.
• Nozzle Clean: Initiates self-cleaning of the bidet nozzle.
• Open Lid / Open Seat: Manually opens or closes the toilet lid and seat.
• Water Temp / Seat Temp / Air Temp: Adjusts the respective temperatures.
• Water Pressure: Adjusts the bidet water pressure.
• Nozzle Position: Adjusts the bidet nozzle's forward/backward position.
• Kid Mode: Activates child-friendly settings, preventing the lid from closing automatically and adjusting bidet settings for children.

6.2 Automatic and Kick Flushing

• Off-Seat Auto Flush: The toilet will automatically flush after you stand up and move away.
• Foot Kick Flush: Gently tap the foot sensor at the base of the toilet to open the lid/seat or initiate a flush.
• Blackout Flush: The built-in backup battery ensures flushing functionality even during power outages.

7. Maintenance

Regular cleaning and maintenance will ensure the longevity and hygiene of your smart toilet.

• General Cleaning: Wipe the exterior surfaces with a soft, damp cloth and mild, non-abrasive cleaner.
• Seat Cleaning: The seat has an antibacterial coating. Do not use chemical reagents or disinfectant cleaners, as they may cause the seat to yellow or damage the coating. Use a damp cloth for wiping.
• Nozzle Cleaning: Use the "Nozzle Clean" function on the remote control for automatic cleaning. The nozzle is also detachable for manual cleaning if needed.

8. Troubleshooting

If you encounter any issues, please refer to the following common solutions:

• No Power: Check if the toilet is properly plugged into a working GFCI outlet. Reset the GFCI if tripped.
• Bidet Not Working: Ensure the water supply valve is fully open. Check water pressure.
• Flushing Issues: Verify water pressure is adequate (minimum 35 PSI). Ensure no obstructions in the bowl.
• Remote Control Not Responding: Check the remote control batteries. Ensure there are no obstructions between the remote and the toilet's sensor.

For further assistance, please contact customer support.

9. Specifications

10. Warranty and Support

EPLO offers a 30-Day Money Back Guarantee and a 12-Month Replacement for the entire toilet.

If you encounter any problems or require support, please contact EPLO US customer service. They aim to reply within 24 hours.

You can typically find seller contact information on the product's purchase page or by searching for "EPLO US" on the platform where you made your purchase.