HIFIMAN Mini Shangri-La Electrostatic Headphone System

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your HIFIMAN Mini Shangri-La Electrostatic Headphone System. Please read these instructions carefully before use to ensure optimal performance and longevity of your device.

Product Overview & Key Features

The HIFIMAN Mini Shangri-La system combines advanced electrostatic headphone technology with a dedicated amplifier to deliver a high-fidelity audio experience.

• Push-Pull Electrostatic Transducer with Planar Design: Engineered for precise sound reproduction across a wide frequency range.
• Nanometer Thickness Diaphragm: An ultra-lightweight diaphragm enhances frequency response and overall sound clarity.
• Nano Particle Coating: Ensures accurate conductivity and stability across the headphone's diaphragm.
• Nanometer Protection Layer: Nearly transparent to sound waves, this layer contributes to high fidelity accuracy.
• Dedicated Amplifier: Provides the necessary power and control for the electrostatic headphones.

Figure 1: The HIFIMAN Mini Shangri-La Electrostatic Headphone System, featuring the headphones and amplifier unit.

Package Contents

Please ensure all items are present in the package:

• HIFIMAN Mini Shangri-La Electrostatic Headphones
• Electrostatic Headphone Amplifier
• Headphone Cable
• Ear Cushions (pre-installed or spare)
• Power Cord
• User Manual (this document)

Setup Instructions

Follow these steps to set up your HIFIMAN Mini Shangri-La system:

1. Unpack Components: Carefully remove the headphones, amplifier, cables, and power cord from their packaging.
2. Position the Amplifier: Place the amplifier on a stable, flat surface with adequate ventilation.
3. Connect Headphones to Amplifier: Locate the electrostatic headphone outputs on the front panel of the amplifier. Connect the headphone cables securely to these outputs. Ensure a firm connection.
4. Connect Audio Source (RCA/XLR):
   • For RCA input: Connect your audio source (e.g., CD player, DAC) to the RCA Single-ended Inputs (L and R) on the rear panel of the amplifier.
   • For XLR input: Connect your balanced audio source to the XLR Balanced Inputs (L and R) on the rear panel of the amplifier.
5. Select Input: On the amplifier's front panel, use the RCA/Balanced Input Selector to choose the appropriate input for your audio source.
6. Connect Power: Ensure the AC 115-230V Voltage Selector on the rear panel is set to your local voltage. Connect the Power Cord to the amplifier and then to a suitable power outlet.
7. Power On: Flip the Power Switch on the rear panel to the 'ON' position.

Figure 2: Headphones connected to the amplifier, ready for use.

Operating Instructions

Once the system is set up, follow these steps for operation:

1. Volume Control: Use the Volume Control knob on the front panel of the amplifier to adjust the listening level. Start with a low volume and gradually increase it to a comfortable level.
2. Input Selection: If you have multiple audio sources connected, use the RCA/Balanced Input Selector to switch between them.
3. Listening: Place the headphones comfortably over your ears. Ensure a good seal for optimal sound quality.
4. Power Off: When finished listening, turn the Volume Control to its minimum setting, then flip the Power Switch on the rear panel to the 'OFF' position.

Maintenance

Proper maintenance ensures the longevity and performance of your system:

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of both the headphones and the amplifier. Avoid using harsh chemicals or abrasive materials.
• Ear Cushions: The ear cushions are replaceable. If they become worn or damaged, contact HIFIMAN support for replacements.
• Storage: Store the headphones and amplifier in a clean, dry environment away from extreme temperatures, humidity, and direct sunlight.
• Cable Care: Handle cables gently. Avoid sharp bends or excessive pulling to prevent damage.

Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

• No Sound:
  • Ensure the amplifier is powered on and the power cord is securely connected.
  • Verify that the headphone cables are properly connected to the amplifier.
  • Check that the audio source is playing and its volume is not muted or too low.
  • Confirm the correct input is selected on the amplifier.
• Distorted Sound:
  • Reduce the volume on both the amplifier and your audio source.
  • Check cable connections for any looseness or damage.
  • Ensure the audio source is providing a clean signal.
• Uncomfortable Fit:
  • Adjust the headband to fit your head size comfortably.
  • Ensure ear cushions are properly seated around your ears.

If the issue persists, please contact HIFIMAN customer support.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official HIFIMAN website. Keep your proof of purchase for any warranty claims.