1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your EPLO iX7 Smart Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Safety Information
Observe all safety warnings and precautions to prevent injury or damage to the product.
- Ensure the power supply is disconnected before any installation or maintenance.
- Do not expose the product to excessive moisture or direct water spray, except as intended for cleaning.
- Only use authorized service personnel for repairs.
- Keep children and pets away from the toilet during operation of automatic features.
- Do not use abrasive cleaners or harsh chemicals on any part of the toilet.
3. Package Contents
Verify that all components are present in the package:
- Smart Toilet Unit
- Remote Control
- Sealing Wax Ring
- Flange
- Three-Way Angle Valve
- Mounting Kits
- Installation Cardboard
- User Manual
- 2 AAA batteries (for remote control)
4. Product Features
The EPLO iX7 Smart Toilet offers a range of advanced features for enhanced comfort and hygiene.
Image: The EPLO iX7 Smart Toilet with its remote control mounted on the wall.
4.1. Auto Open/Close Lid
The toilet lid can automatically open and close. This function can be toggled on or off. When off, the lid can still be opened/closed via foot kick or remote control.
Image: Illustration of the automatic lid opening and closing feature, alongside the remote control.
4.2. Foam Dispenser (Foam Shield)
The integrated foam dispenser creates a foam layer in the bowl to help isolate odors, prevent splashing, and reduce bacterial adhesion. Foam liquid can be created using body wash and water (60% water).
Image: Visual representation of the foam shield feature, showing its ability to prevent splashing and isolate odors.
4.3. Heated Seat & Night Light
The seat provides adjustable heating for comfort. A built-in night light guides users in the dark, automatically activating in low light conditions.
Image: Close-up view of the elongated heated seat and the integrated night light.
4.4. Warm Water Bidet & High-Speed Dryer
The bidet offers instant warm water for female and rear wash functions, with adjustable temperature and nozzle position. After washing, a high-speed dryer with adjustable air temperature and speed provides efficient drying.
Image: Diagram showing UVC cleaning of the nozzle and various bidet wash modes (Rear/Front, H/C Massage, Moving Wash).
Image: Illustration of the high-speed dryer function with adjustable temperature and speed settings.
4.5. Siphonic Jet Flushing Technology
The iX7 utilizes siphonic jet flushing technology for powerful and efficient cleaning. It is tankless and features a built-in backup battery, allowing flushing even during a power outage.
Image: Diagram illustrating the siphonic jet flushing mechanism, showing whirlpool flush, jet flow push, and siphon blowdown.
4.6. LED Temperature Display
An LED display shows real-time temperatures for water, seat, and air dryer. It also features an ECO mode for energy efficiency.
Image: Close-up of the LED display showing water, dryer, and seat temperature settings, including ECO mode.
4.7. Japanese SIAA Certified Seat
The toilet seat is covered with a hygienic coating, certified by Japanese SIAA, for enhanced cleanliness.
Image: Graphic indicating Japanese SIAA certification for the hygienic coating on the toilet seat.
5. Installation
The EPLO iX7 Smart Toilet is designed for floor-mounted installation with a standard 12-inch rough-in. Professional installation is recommended.
5.1. Pre-Installation Checks
- Ensure your bathroom has a standard 12-inch rough-in.
- Verify that the water pressure is at least 35 PSI.
- Confirm availability of a grounded electrical outlet (US style with ground plug).
- Do not use with LSP Pull Stop Box Valves.
5.2. Dimensions
The toilet dimensions are approximately 27.2"D x 16"W x 18.8"H. The seat height is 17 inches.
Image: Technical drawing showing the dimensions of the EPLO iX7 Smart Toilet, including seat height and rough-in requirement.
5.3. Installation Steps
Refer to the included 'Installation Cardboard' and detailed instructions within the user manual for step-by-step guidance. Key steps include:
- Prepare the floor flange and water supply line.
- Install the wax ring and secure the toilet to the floor using the mounting kits.
- Connect the water supply to the three-way angle valve.
- Connect the power cord to a grounded outlet.
6. Operating Instructions
The EPLO iX7 Smart Toilet offers multiple ways to control its functions.
6.1. Flushing Methods
The toilet supports various flushing methods:
- Remote Control Flush: Use the dedicated flush button on the remote.
- Side Button Flush: Press the flush button located on the side of the toilet.
- Foot Kick Flush: A sensor at the base allows for flushing by gently kicking the foot sensor.
- Off-Seat Auto Flush: The toilet automatically flushes after the user stands up and moves away from the seat. This function can be enabled/disabled.
Image: Visual guide to the four flushing methods (remote, press, foot kick, off-seat auto flush) and the auto open/close sequence for male and female users.
6.2. Bidet Functions
Use the remote control to activate and adjust bidet functions:
- Rear Wash: For posterior cleansing.
- Female Wash: For feminine cleansing.
- Moving Wash: The nozzle moves back and forth for a wider cleaning area.
- H/C Massage: Alternating hot and cold water for a massage effect (10 seconds hot, 5 seconds cold).
- Adjust water temperature and pressure using the remote.
6.3. Dryer Operation
After bidet use, activate the dryer function via the remote control. Adjust air temperature and speed to your preference.
6.4. Remote Control
The wireless remote control provides access to all smart toilet functions. Ensure the included AAA batteries are installed correctly.
7. Maintenance
Regular cleaning and maintenance ensure optimal performance and longevity of your EPLO iX7 Smart Toilet.
7.1. Cleaning the Toilet Bowl
Clean the ceramic bowl with a mild, non-abrasive toilet cleaner and a soft brush or cloth. Avoid harsh chemicals that could damage the glaze.
7.2. Cleaning the Seat and Lid
Wipe the seat and lid with a damp cloth and mild soap. Do not use chemical cleaners on the SIAA certified hygienic coating, as it may cause adverse reactions.
7.3. Nozzle Cleaning
The bidet nozzle is removable for cleaning. Periodically clean the nozzle with a soft brush and water. The UVC cleaning function helps maintain nozzle hygiene before each use.
7.4. Foam Dispenser Maintenance
Regularly refill the foam dispenser with the recommended mixture of body wash and water (60% water).
8. Troubleshooting
If you encounter issues, refer to the following common troubleshooting tips. For persistent problems, contact customer support.
- No Power: Check if the power cord is securely plugged in and the circuit breaker is not tripped.
- No Water Flow: Ensure the water supply valve is fully open. Check for kinks in the water supply hose.
- Lid Not Opening/Closing Automatically: Verify the auto open/close function is enabled in the settings. Check for obstructions.
- Bidet Not Functioning: Ensure the seat sensor is activated (user is seated). Check water temperature settings.
- Remote Control Not Responding: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the toilet.
- Weak Flush: Check water pressure. Ensure the siphonic jet is not obstructed.
9. Specifications
| Feature | Specification |
|---|---|
| Model | iX7 |
| Product Dimensions | 27.2"D x 16"W x 18.8"H |
| Item Weight | 103 Pounds |
| Material | ABS, Ceramic, Stainless Steel Nozzle |
| Installation Type | Floor Mounted |
| Rough-in | Standard 12 inches |
| Seat Height | 17 inches |
| Water Consumption | 1.28 Gallons per Flush |
| Flush Type | Automatic, Siphonic Jet Flushing Technology |
| Special Features | Auto Open/Close, LED Temp Display, Nightlight, High Speed Dryer, Adjustable Dryer Speed, Foam Dispenser, Heated Seat, Warm Water Bidet, UVC Cleaning, Backup Battery |
| Certification | ETL Listed, Japanese SIAA Certified (Seat) |
| Power Plug | B - US style with ground plug |
| Batteries (Remote) | 2 AAA batteries (included) |
10. Warranty and Support
EPLO provides a 30-Day Money Back Guarantee and a 12-Month Replacement for the entire toilet unit. For any problems or inquiries, please contact EPLO customer service. They aim to reply within 24 hours.
10.1. How to Contact Support
If you purchased through Amazon, you can typically find the seller's contact information by navigating to your order details or by clicking on the seller's name on the product page and selecting 'Ask a question'.
Image: Instructions on how to access customer support by clicking 'Sold by EPLO US' and then 'Ask a question' on the Amazon product page.
