SANDIAN GDS49 Golf Club Head UV DTF Decal Instruction Manual (Lion Design)

1. Product Overview

The SANDIAN GDS49 UV DTF Decals are designed to personalize and enhance the appearance of your golf driver and fairway wood heads. These decals feature a Lion design and are engineered for durability, offering waterproof, UV-resistant, weather-resistant, and scratch-proof properties. They also serve as an alignment aid to improve your golf shots.

Each pack includes 4 decals: 2 large (approximately 3.15 inches / 8cm) suitable for standard drivers, and 2 medium (approximately 2.4 inches / 6cm) for fairway wood heads.

Image 1: SANDIAN Lion design UV DTF decal applied to a golf driver head.

2. Setup and Application

Follow these steps for proper application of your SANDIAN UV DTF decals. No special tools are required for installation.

1. Prepare the Surface: Ensure the golf club head surface is clean, dry, and free from dust or grease.
2. Affix Auxiliary Sticker: Carefully peel off the backing from the auxiliary sticker (if provided) and place it on the decal to help with handling.
3. Peel Off Decal: Gently pull and peel the decal off its backing paper. The design should remain on the clear transfer film.
4. Position and Press: Align the decal on the desired area of your golf club head. Once positioned, press down firmly, rubbing across the entire decal to ensure good adhesion, paying attention to details and edges.
5. Remove Outer Protective Film: Slowly and carefully peel off the clear outer protective film, leaving the decal adhered to the club head.

Image 2: Step-by-step application process for the UV DTF decal.

3. Operating and Usage

Once applied, the SANDIAN UV DTF decal not only enhances the aesthetic of your golf club but can also assist in improving your game. The design, particularly if it includes a linear element, can serve as a visual aid for ball alignment at address, helping you concentrate on your golf shots more effectively. All SANDIAN DTF stickers conform to the rules of golf.

Image 3: Golf club head with decal demonstrating improved address position.

4. Maintenance

SANDIAN UV DTF decals are designed for long-lasting performance and minimal maintenance. They are:

• Waterproof: Resistant to moisture, allowing for use in various weather conditions.
• UV Resistant: Designed to resist fading from sun exposure.
• Weather Resistant: Maintains integrity in diverse outdoor environments.
• Scratch-Proof: Engineered to withstand minor abrasions and maintain its appearance.

To clean the decal and club head, gently wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh scrubbing that could compromise the decal's integrity.

Image 4: Visual representation of decal durability against scratches, water, and fading.

5. Troubleshooting: Decal Removal

If you wish to remove the decal, follow these steps. Note that these decals are designed for single use and are not reusable after removal.

1. Apply Heat: Use a hot air source, such as a hairdryer or heat gun on a low setting, to gently warm the decal. This helps to soften the adhesive.
2. Scratch Off: Once softened, carefully use a plastic scraper or your fingernail to gently scratch off the decal. Avoid using metal tools that could damage the club head surface.
3. Clean Residue: After removing the decal, any remaining adhesive residue can be wiped off with a cloth dampened with rubbing alcohol.

6. Specifications

Image 5: Product packaging and size details for SANDIAN Golf Deco Stickers.

7. Support

For further assistance or inquiries regarding your SANDIAN UV DTF Decals, please visit the official SANDIAN website at www.iSandian.com or refer to the contact information provided with your purchase.