1. Introduction
The LILYGO T-SIM7670G-S3 is a versatile development board designed for Internet of Things (IoT) applications requiring cellular connectivity and GPS capabilities. It integrates an ESP32-S3 microcontroller with a SIM7670G 4G LTE module, offering robust wireless communication, low-power operation, and support for various peripherals. This manual provides essential information for setting up, operating, and maintaining your device.
2. Product Overview
The T-SIM7670G-S3 board combines an ESP32-S3 for Wi-Fi and Bluetooth with a SIM7670G module for 4G LTE and GPS. It features a compact design, an integrated 18650 battery holder, and support for solar charging, making it suitable for remote and low-power applications.

Figure 2.1: Front view of the LILYGO T-SIM7670G-S3 development board, showing the ESP32-S3 module, SIM7670G module, USB-C port, and various pin headers.

Figure 2.2: Back view of the LILYGO T-SIM7670G-S3 development board, highlighting the integrated 18650 battery holder and power management components.

Figure 2.3: Physical dimensions of the LILYGO T-SIM7670G-S3 board: Length (L) 110mm, Width (W) 33mm, Height (H) 22mm.

Figure 2.4: Included components: 1. T-SIM7670G-S3 board, 2. LTE antenna, 3. PH2.0 battery cable, 4. 2x 16-pin headers, 5. GPS antenna.
3. Features
- Microcontroller: ESP32-S3
- Cellular Module: SIM7670G (4G LTE Cat1, Global Bands)
- Wireless Connectivity: 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE)
- GPS: Integrated GPS functionality via SIM7670G
- Storage: TF Card slot for external storage
- Power Management: Integrated 18650 battery holder, low-power design, supports solar charging
- Interfaces: USB Type-C for programming and power, various GPIO pins, I2C, SPI, UART, SDIO, I2S, CAN
4. What's in the Box
The standard package for the LILYGO T-SIM7670G-S3 includes the following items:
- 1 x LILYGO T-SIM7670G-S3 Development Board
- 1 x 4G LTE Antenna
- 1 x GPS Antenna
- 1 x PH2.0 Battery Cable
- 2 x 16-Pin Headers

Figure 4.1: The LILYGO T-SIM7670G-S3 development board and its accompanying accessories, including antennas and cables.
5. Setup Instructions
Follow these steps to prepare your LILYGO T-SIM7670G-S3 for operation:
- Insert SIM Card: Carefully open the SIM card slot on the SIM7670G module and insert a Nano SIM card. Ensure it is correctly oriented and locked into place.
- Insert TF Card (Optional): If external storage is required, insert a TF (MicroSD) card into the designated slot.
- Connect Antennas: Connect the 4G LTE antenna to the main antenna connector and the GPS antenna to its respective connector on the board. Ensure connections are secure.
- Install 18650 Battery (Optional): If using battery power, insert an 18650 battery into the battery holder, observing correct polarity. Alternatively, connect an external battery via the PH2.0 connector.
- Power On: Connect the board to a power source via the USB Type-C port or ensure the 18650 battery is charged. The board can also be powered via solar input if a solar panel is connected.
- Connect to Computer: Use a USB Type-C cable to connect the board to your computer for programming and serial communication.
6. Operating Instructions
The LILYGO T-SIM7670G-S3 is a development board, and its operation is primarily driven by custom firmware uploaded by the user. Basic operation involves:
- Programming: Develop your application using the ESP-IDF framework, Arduino IDE, or other compatible development environments. Upload the compiled firmware to the ESP32-S3 via the USB Type-C port.
- Cellular Communication: Utilize the SIM7670G module for sending/receiving data over 4G LTE networks. This typically involves AT commands or dedicated libraries within your code.
- GPS Functionality: Access GPS data from the SIM7670G module to obtain location information.
- Wi-Fi and Bluetooth: Leverage the ESP32-S3's built-in Wi-Fi and Bluetooth capabilities for local network communication or device pairing.
- Power Management: Monitor battery status and manage power consumption, especially when operating on battery or solar power. The board supports low-power modes for extended operation.
Video 6.1: An introductory video demonstrating the features and basic usage of the LILYGO T-SIM7670G-S3 development board, including its components and power options.
7. Specifications
| Feature | Detail |
|---|---|
| MCU | ESP32-S3 |
| LTE/GSM Module | SIM7670G |
| Clock Speed | 240MHz |
| Flash Memory | 16MB |
| PSRAM | 8MB |
| Wireless Connectivity | 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (LE) |
| Peripheral Interfaces | I2C, SPI, UART, SDIO, I2S, CAN |
| SIM Card Support | Nano SIM (1.8V/3.0V) |
| TF Card Support | Yes |
| Power Supply | USB Type-C (5V), 18650 Battery, Solar Input (5-6V) |
| Operating System | FreeRTOS (typical) |
| LTE-FDD Frequency Bands | B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66 |
| LTE-TDD Frequency Bands | B34/B38/B39/B40/B41 |
| Data Transfer (Download/Upload) | 10Mbps / 5Mbps |
| GNSS | Support |
| USB Driver Support | Microsoft Windows 7/8/10, Linux, Android |
| Product Number (P/N) | S2-10D1Y-Z32W4 |
| Serial Number (SN) | MP06244689C6806 |
| IMEI | 864643060184290 |
| Software Version (SW) | 2374B04SIM767XM5A_M |
8. Troubleshooting
- Device Not Powering On: Ensure the USB-C cable is securely connected to a power source, or that the 18650 battery is correctly inserted and charged. Check the power switch if present.
- No Cellular Connection: Verify the SIM card is correctly inserted and activated. Ensure the 4G LTE antenna is securely connected. Check network coverage in your area.
- GPS Not Acquiring Signal: Ensure the GPS antenna is connected and has a clear view of the sky. GPS signal acquisition can take several minutes.
- Programming Issues: Confirm that the correct USB drivers are installed on your computer. Verify the development environment (e.g., Arduino IDE, ESP-IDF) is configured for the ESP32-S3 and the correct board is selected.
- Unstable Operation: Check power supply stability. Ensure proper heat dissipation if the module is running intensive tasks. Review your code for potential errors or resource conflicts.
9. Support and Resources
For detailed technical documentation, code examples, and community support, please refer to the official LILYGO GitHub repositories:
- General Information: github.com/Xinyuan-LilyGO/LilyGO-T-A76XX
- Model Comparison: For distinctions between T-SIM7670G-S3-Standard and T-SIM7670G-S3, refer to: github.com/Xinyuan-LilyGO/LilyGo-Modem-Series/blob/main/docs/model_comparison.md
If you have further questions or require assistance, please contact LILYGO customer support.
10. Warranty Information
Please refer to the manufacturer's official website or your point of purchase for detailed warranty terms and conditions. Warranty coverage typically includes defects in materials and workmanship under normal use. Keep your proof of purchase for warranty claims.