1. Introduction
This manual provides instructions for the PZL Replacement Remote Control, designed for use with specific Onkyo Audio/Video Receiver models. This remote offers a direct replacement solution without the need for complex programming.
Package Contents:
- 1 x PZL Replacement IR Remote Control
Note: Batteries and additional instructions are not included in the package.
2. Setup
2.1 Battery Installation
The remote control requires two 1.5V AAA batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Figure 1: Battery installation in the remote control. Ensure correct polarity when inserting AAA batteries.
2.2 Initial Use (No Programming Required)
This replacement remote control is designed for immediate use with compatible Onkyo Audio/Video Receivers. No programming or pairing is required. Once batteries are installed, the remote is ready to operate your device.
Figure 2: The remote control is ready for use directly after battery insertion, requiring no programming.
3. Operating Instructions
The PZL Replacement Remote Control provides full functionality for your compatible Onkyo Audio/Video Receiver. Point the remote directly at your receiver for optimal performance.
Figure 3: Front view of the PZL Replacement Remote Control.
3.1 Key Functions
The remote control features an ergonomic design with responsive keys for various functions:
- Power Button: Turns the receiver on or off.
- Input Selection: Buttons labeled with numbers (1-9, 0) and specific input names (e.g., TV, CD, DVD, AUX, USB, TUNER) allow direct selection of audio/video sources.
- Volume Control: VOL + and VOL - buttons adjust the master volume.
- Channel Control: CH + and CH - buttons (if applicable to your receiver's functions).
- Navigation Pad: Central OK button with directional arrows (Up, Down, Left, Right) for menu navigation.
- Menu Button: Accesses the receiver's main menu.
- Exit Button: Exits current menu or function.
- Playback Controls: Buttons for Play, Pause, Stop, Fast Forward, Rewind, Skip Track (forward/backward).
- Numeric Keypad: For direct input of numbers or channel selection.
- Color Buttons (A, B, C, D): Functionality depends on the specific Onkyo receiver model and current input.
Figure 4: Comparison of the PZL replacement remote with the original Onkyo RC-391M remote, highlighting functional equivalence.
3.2 Optimal Performance
The remote utilizes infrared (IR) technology for communication. Ensure a clear line of sight between the remote control and the IR sensor on your Onkyo receiver. The remote is effective up to 12 meters (40 feet) with precise control.
Figure 5: Demonstrating long-distance precise control with the remote.
4. Maintenance
4.1 Cleaning
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these may damage the remote's surface or internal components.
4.2 Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops functioning. Always replace both batteries at the same time with new 1.5V AAA batteries. Do not mix old and new batteries, or different types of batteries.
Dispose of used batteries according to local regulations.
5. Troubleshooting
- Remote not responding:
- Ensure batteries are installed correctly with the correct polarity.
- Replace old batteries with new 1.5V AAA batteries.
- Check for any obstructions between the remote control and the receiver's IR sensor.
- Ensure you are within the operational range (up to 12 meters / 40 feet) and pointing the remote directly at the receiver.
- Specific buttons not working:
- Verify that the button is clean and not stuck.
- Some functions may be specific to certain input modes on your receiver. Ensure the correct input is selected.
- Remote feels sluggish:
- This often indicates low battery power. Replace the batteries.
If issues persist after following these steps, please refer to the support section.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | PZL |
| Compatible Models | Onkyo TX-DS575, TX-DS575X, RC-391M, RC-392M |
| Compatible Devices | Audio/Video Receiver |
| Power Source | 2 x 1.5V AAA Batteries (not included) |
| Special Feature | No Programming Required |
| Color | Black |
| Item Weight | 1.92 ounces (approx. 54 grams) |
| Package Dimensions | 1.5 x 1 x 0.6 inches (approx. 3.8 x 2.5 x 1.5 cm) |
| Max Operating Distance | 12 meters / 40 feet |
Figure 6: Dimensions of the PZL Replacement Remote Control.
7. Warranty Information
Specific warranty details are not provided in the product information. For inquiries regarding warranty coverage, please contact PZL customer support directly.
8. Customer Support
For any questions regarding your PZL Replacement Remote Control, including compatibility or operational issues, please contact PZL customer service. They aim to respond to inquiries within 12 hours on weekdays.
If your specific Onkyo model is not listed as compatible, it is recommended to contact support before purchase to verify compatibility.
Contact information for PZL customer support can typically be found on the seller's page or through the platform where the product was purchased.
