Fieety V7 Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Fieety V7 Cordless Vacuum Cleaner. This powerful and versatile vacuum is designed to provide efficient cleaning for various surfaces, including hard floors, carpets, and pet hair. Featuring a 550W brushless motor, 45KPa suction, a smart OLED display, and a long-lasting battery, the Fieety V7 offers a superior cleaning experience. Please read this manual thoroughly before use to ensure proper operation, maintenance, and safety.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:

• Always disconnect the vacuum cleaner from the charger before cleaning or performing maintenance.
• Do not use the vacuum cleaner outdoors or on wet surfaces.
• Do not allow children to operate the vacuum cleaner. Close supervision is necessary when used near children.
• Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without the dust cup and/or filters in place.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.

3. Package Contents

Please check the box for the following components:

• Main Vacuum Body (with Dust Cup and Motor)
• Extension Wand
• Motorized Floor Brush (with S-shaped anti-tangle roller and LED lights)
• 2-in-1 Crevice Tool/Brush Attachment
• Wall Mount Charging Dock
• Power Adapter
• User Manual

Image 3.1: All components included with the Fieety V7 Cordless Vacuum Cleaner, showing the main unit, extension wand, floor brush, 2-in-1 tool, wall mount, and filters.

4. Product Overview

4.1 Key Features

• Powerful Suction: Equipped with a 550W brushless motor, providing up to 45KPa of suction power for deep cleaning.
• Long Runtime: Features an 8-cell detachable battery, offering up to 60 minutes of runtime in ECO mode.
• Smart OLED Display: Interactive screen displays suction power, battery level, and alerts for blockages or dust cup status.
• Anti-Tangle Brush Roll: S-shaped brush roll design minimizes hair tangling, combined with soft and hard bristles for multi-surface cleaning.
• Advanced Filtration: 7-layer filtration system with high-efficiency HEPA filters captures 99.97% of dust and allergens.
• LED Headlights: Integrated LED lights on the floor brush illuminate hidden dirt and debris.
• Large Dust Cup: 1.5L capacity dust cup reduces the frequency of emptying.

Image 4.1: Visual representation of the Fieety V7's powerful 550W brushless motor and adjustable suction up to 45KPa, effectively cleaning various debris.

Image 4.2: Close-up of the Fieety V7's smart OLED display, indicating battery percentage and current suction mode (ECO, Standard, Max).

5. Setup and Assembly

5.1 Assembly

1. Insert the extension wand into the main vacuum body until it clicks securely into place.
2. Attach the motorized floor brush to the other end of the extension wand, ensuring it clicks firmly.
3. Alternatively, attach the 2-in-1 crevice tool/brush directly to the main vacuum body for handheld use.

5.2 Initial Charging

Before first use, fully charge the vacuum cleaner for approximately 4 hours.

1. Mount the wall charging dock in a convenient location near a power outlet.
2. Connect the power adapter to the wall charging dock and plug it into a power outlet.
3. Place the vacuum cleaner onto the wall charging dock. The OLED display will indicate charging status.
4. The detachable battery can also be charged individually by removing it from the main body and connecting it to the charger.

Image 5.1: The Fieety V7 vacuum cleaner being charged via its wall-mounted charging dock, illustrating the convenient storage and charging solution.

Image 5.2: An illustration highlighting the Fieety V7's long battery life, capable of providing up to 60 minutes of continuous operation.

6. Operating Instructions

6.1 Power On/Off

Press the power button on the handle to turn the vacuum cleaner on or off.

6.2 Adjusting Suction Power

The Fieety V7 features a smart OLED display that allows you to adjust suction power. Tap the touch controls on the display to cycle through different suction modes (ECO, Standard, Max) to suit your cleaning needs.

6.3 Cleaning Different Surfaces

• Hard Floors: Use ECO or Standard mode for daily cleaning. The soft bristles of the brush roll are gentle on hard surfaces.
• Carpets/Rugs: Switch to Standard or Max mode for deeper cleaning. The combination of soft and hard bristles effectively agitates carpet fibers to lift embedded dirt.
• Pet Hair: Max mode is recommended for stubborn pet hair. The S-shaped anti-tangle roller helps prevent hair from wrapping around the brush.
• Above-Floor Cleaning: Detach the extension wand and use the 2-in-1 tool for cleaning upholstery, curtains, car interiors, or tight spaces.

Image 6.1: The Fieety V7 vacuum cleaner effectively cleaning both hard floors and carpets, demonstrating its versatility and the illuminating effect of its LED headlights.

6.4 Self-Standing Feature

The Fieety V7 is designed to be self-standing, allowing for convenient temporary storage during cleaning breaks. Simply push the vacuum forward slightly until it locks into an upright position.

Image 6.2: The Fieety V7 vacuum cleaner standing upright independently, showcasing its convenient self-standing and easy storage design.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your vacuum cleaner.

7.1 Emptying the Dust Cup

The 1.5L dust cup should be emptied regularly, especially when the 'dust cup full' alert appears on the OLED display or when debris reaches the MAX fill line.

1. Press the dust cup release button to detach it from the main body.
2. Hold the dust cup over a trash bin and press the bottom release latch to open the lid and empty the contents.
3. Close the lid firmly and reattach the dust cup to the main body.

7.2 Cleaning Filters

The Fieety V7 features a 7-layer filtration system, including HEPA filters. Filters should be cleaned monthly or as needed.

1. Twist and pull to remove the filter assembly from the dust cup.
2. Tap off loose dirt from the pre-motor filter and HEPA filter.
3. Rinse the filters under cold running water until the water runs clear. Do not use detergent.
4. Allow filters to air dry completely for at least 24 hours before reassembling. Do not use a hairdryer or other heating methods.

7.3 Cleaning the Brush Roll

Periodically check the brush roll for tangled hair or debris.

1. Turn off the vacuum and detach the floor brush.
2. Locate the brush roll release tab/lock on the side of the floor brush and unlock it.
3. Remove the brush roll. Use scissors to cut away any tangled hair or threads.
4. Clean any debris from the brush roll housing.
5. Reinsert the brush roll and lock it into place.

8. Troubleshooting

If you encounter issues with your Fieety V7, please refer to the following common problems and solutions:

9. Specifications

10. Warranty and Customer Support

Fieety is committed to providing high-quality products and excellent customer service. For any product-related inquiries, technical support, or warranty claims, please contact our customer support team.

Email: support@fieety.com

Please have your model number (V7) and purchase information ready when contacting support.