1. Introduction
Thank you for choosing the Devoko Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read it thoroughly before use and retain it for future reference.
This electric standing desk is designed to promote a healthy work posture by allowing seamless transitions between sitting and standing positions, reducing the effects of prolonged sitting.
Image 1: The Devoko Electric Standing Desk in a typical office environment.
2. Safety Instructions
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not place hands or other body parts near moving parts of the desk frame during height adjustment.
- Ensure the power cord is not pinched or damaged. Use only the provided power adapter.
- Do not overload the desk. Refer to the specifications for maximum weight capacity.
- Avoid placing liquids directly on the control panel or near electrical components.
- If the desk malfunctions or makes unusual noises, disconnect power immediately and contact support.
3. Package Contents
Please verify that all the following components are included in your package:
- Desktop Panels (4 sections)
- Desk Legs (2)
- Crossbar/Frame
- Control Box
- Control Panel with Type-C Port
- Power Adapter and Cable
- Cable Management Tray
- Headphone Hook
- Assembly Hardware (screws, bolts, Allen keys)
- User Manual
4. Assembly Instructions
Assembly typically takes approximately 30 minutes with the provided tools. It is recommended to have two people for easier assembly, especially when handling the desktop panels.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Frame: Attach the crossbar to the desk legs using the provided screws. Ensure all connections are secure.
- Attach Desktop Panels: Place the desktop panels onto the assembled frame. Align the pre-drilled holes and secure the panels to the frame using the designated screws. The desktop consists of four 15mm panels.
- Install Control Box and Panel: Mount the control box and control panel to the underside of the desktop as indicated in the diagram. Connect the motor cables from the legs to the control box, and then connect the control panel to the control box.
- Install Cable Management and Accessories: Attach the cable management tray and headphone hook to the underside of the desk.
- Connect Power: Plug the power adapter into the control box and then into a wall outlet.
Image 2: Visual guide indicating simple assembly, 30-minute setup, and included tools.
5. Operating Instructions
5.1. Height Adjustment
Use the Up (▲) and Down (▼) buttons on the control panel to adjust the desk height. The current height will be displayed on the digital screen.
5.2. Memory Presets
The desk features three memory presets (1, 2, 3) to save your preferred sitting and standing heights.
- To Save a Height: Adjust the desk to your desired height. Press the "S" button, then press one of the number buttons (1, 2, or 3) within 3 seconds. The display will show "S-" followed by the number, indicating the height is saved.
- To Recall a Height: Press the corresponding number button (1, 2, or 3). The desk will automatically move to the saved height.
5.3. Type-C Charging Port
A Type-C charging port is integrated into the control panel. Use it to conveniently charge compatible devices such as smartphones or tablets.
Image 3: The intelligent multifunction control panel with Type-C charging, 3 memory presets, and anti-collision function.
5.4. Anti-Collision System
The desk is equipped with a sensitive anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage or injury. The sensitivity of this system may be adjustable (refer to troubleshooting for details).
Image 4: The desk's height adjustment range, illustrating sitting mode (72cm) and standing mode (118cm).
6. Maintenance
- Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Management: Regularly check and organize cables using the integrated cable management tray to prevent tangles and damage.
- Inspection: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary.
- Motor Care: The motor is designed for durability. Avoid continuous operation for extended periods without rest.
Image 5: The integrated cable management system, designed for organizing power cords and device cables.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected; Control box error; Overload | Check power connections; Reset the desk (see below); Reduce weight on desk. |
| Desk moves unevenly | Uneven weight distribution; Obstruction | Distribute weight evenly; Check for obstructions under the desk. |
| Anti-collision system too sensitive/not sensitive enough | Default setting; Environmental factors | To adjust sensitivity: Press and hold the 'S' button for 5 seconds until 'A-1' appears. Use up/down arrows to select sensitivity level (A-0 to A-3, A-0 is off, A-3 is most sensitive). Press 'S' to confirm. |
| Error code displayed (e.g., E01, E02) | Motor fault; Sensor error; Overheat protection | Disconnect power for 10 minutes, then reconnect. If error persists, contact customer support. |
7.1. Reset Procedure
If the desk is not functioning correctly, a reset may resolve the issue:
- Press and hold the Down (▼) button until the desk reaches its lowest position and then slightly rises.
- Release the button, then press and hold the Down (▼) button again until the display shows "RST" or the desk moves slightly down and then up.
- Release the button. The desk is now reset.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 0077 |
| Brand | Devoko |
| Desktop Dimensions (L x W) | 160 cm x 80 cm |
| Height Adjustment Range | 72 cm - 118 cm |
| Dynamic Weight Capacity | 70 kg |
| Static Weight Capacity | 80 kg |
| Lift Speed | 20 mm/sec |
| Noise Level | < 45 dB |
| Material | Industrial-grade Steel Frame, 15mm Desktop Panels |
| Color | White |
| Special Features | Type-C Charging Port, 3 Memory Presets, Anti-Collision System |
Image 6: Desk dimensions, highlighting the 160cm length and 80cm width.
Image 7: Comparison illustrating the enhanced stability and durability of the Devoko desk frame (80x60cm legs) compared to other standard frames (65x45cm legs).
9. Warranty and Support
Devoko products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please contact your retailer or visit the official Devoko website. Please have your model number (0077) and purchase date available when contacting support.
