Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set. This smart lock system offers enhanced security and convenience for your home or property.

Key features include multiple access methods such as keypad codes, one-time codes, and traditional backup keys. It supports smart access management with up to 100 user codes, auto-lock functionality, and an anti-peep password feature for added security. The lock is constructed from durable zinc alloy, is ANSI Grade 3 certified, and boasts an IP54 weather resistance rating.

Figure 1.1: The Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set in Satin Nickel.

Figure 1.2: Overview of the various unlocking methods available, including keypad code, one-touch locking, one-time codes, anti-peeping password, physical key, and door knob.

2. Package Contents

Please verify that all components are present before beginning installation:

• Deadbolt Front Lock (x1)
• Deadbolt Rear Lock (x1)
• Door Knob Front (x1)
• Door Knob Rear (x1)
• Lock Latch (x2)
• Key (x2)
• Hole Opening Diagram (x1)
• Installation Tutorial Card (x1)
• Instructions (x1)
• Mounting Plate Screws 1.46in/37mm (A) (x2)
• Mounting Plate Screws 1.19in/30mm (B) (x3)
• Mounting Plate Screws 0.24in/6mm (C) (x2)
• Fixed Leg (D) (x2)
• Silicone Ring (E) (x1)
• Spare Parts (x4)

3. Installation Guide

The Ulecoce Keyless Entry Door Lock is designed for easy installation, typically requiring only a screwdriver and about 15 minutes. No extra drilling is required for standard door preparations. This lock is compatible with both left and right-hand doors.

3.1. Pre-Installation Check

Before starting, ensure your door's dimensions are compatible with the lock. Refer to the diagram below for required measurements and hole configurations.

Figure 3.1: Door preparation and lock dimensions. Ensure your door's backset is 2-3/8 or 2-3/4 inches (60mm or 70mm) and the hole diameter is greater than 2-1/8 inches (54mm).

3.2. Step-by-Step Installation

For a visual guide, please watch the official installation video provided below. Detailed steps are also outlined.

1. Install the Lock Latch: Insert the lock latch into the door edge, ensuring it is oriented correctly for your door's swing. Secure it with the provided screws using a screwdriver.
2. Prepare the Exterior Knob: If necessary, disassemble the interior knob from the exterior knob using the knob release tool to depress the knob retainer and pull the knob out of the spindle.
3. Install the Exterior Knob: Match the exterior knob to the keyhole and pass its spindle through the lock latch.
4. Install the Interior Knob: Buckle the interior knob against the rear lock body. Ensure it is buckled and installed according to the corresponding position.
5. Secure the Knobs: Tighten the screws to secure both the exterior and interior knob assemblies to the door.

Figure 3.2: The Ulecoce lock is designed for wide compatibility with common door hardware configurations, making it suitable for most residential doors.

4. Operating Instructions

4.1. Keypad Code Access

The lock supports up to 100 user codes. To unlock, enter your programmed code on the keypad followed by the '#' key. The lock will disengage, allowing you to open the door.

4.2. One-Time Codes

Generate and share one-time codes for temporary access, ideal for guests or service providers. These codes expire after a single use.

Figure 4.1: The anti-peep tactile keypad allows you to enter random digits before or after your actual code to prevent others from guessing your entry sequence.

4.3. Auto-Lock and One-Touch Lock

The auto-lock feature can be customized to automatically lock the door within 10-30 seconds after it's closed. For immediate locking, use the one-touch lock function located on the rear lock body.

Figure 4.2: The auto-lock feature provides convenience and security by automatically securing the door after a set time. The one-touch lock allows for instant manual locking.

5. Maintenance

5.1. Battery Replacement

The lock is powered by 4 AA batteries. When the battery level is low, the lock will provide a low battery alert. Replace all four batteries promptly to ensure continuous operation. Note that battery consumption may increase in colder temperatures.

Figure 5.1: Internal view of the U18 lock body, highlighting the battery compartment for 4 AA batteries and internal components.

5.2. Cleaning

To clean the lock, use a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish and electronic components.

6. Troubleshooting

• Lock not responding to keypad: Check battery levels and replace if necessary. Ensure the correct code is being entered.
• Auto-lock not engaging: Verify that the auto-lock feature is enabled and the delay time is set correctly. Ensure the door is fully closed.
• Knob feels loose: Periodically check and tighten the mounting screws to ensure the lock remains securely fastened to the door.
• Difficulty with installation: Refer to the installation video and detailed steps in Section 3. Ensure all components are correctly aligned and installed.

7. Specifications

Figure 7.1: Detailed dimensions and key advantages of the Ulecoce U18 Smart Door Lock Set.

8. Warranty and Support

Ulecoce products are designed for reliability and durability. For specific warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Ulecoce website. Our customer service team is available to assist with any questions or issues you may encounter.

You can also find additional resources and frequently asked questions on the Ulecoce brand store on Amazon: Ulecoce Store.