JBL JBLVFLEXBEG-Pouch
JBL Vibe Flex Wireless Earbuds User Manual
Model: JBLVFLEXBEG-Pouch
Introduction
The JBL Vibe Flex Wireless In-Ear Earbuds are designed to provide superior sound quality with deep bass and clear highs. These Bluetooth earbuds offer comfort and convenience with an ergonomic in-ear design and a built-in microphone for seamless calls. With up to 32 hours of battery life, they are ideal for music enthusiasts and professionals on the go, combining style, functionality, and performance in a sleek beige finish.
What's in the Box
- JBL Vibe Flex Earbuds
- Charging Case
- USB Charging Cable
- Eartips (various sizes)
- Protective Pouch

Image: JBL Vibe Flex earbuds in their open charging case, alongside a black protective pouch. This shows the main components included with the product.
Setup
1. Charging the Earbuds and Case
- Connect the provided USB charging cable to the charging port on the back of the case.
- Plug the other end of the cable into a USB power source (e.g., wall adapter, computer USB port).
- The LED indicators on the case will show charging status. A full charge typically takes approximately 2 hours.
- Ensure earbuds are placed correctly in the charging case to charge them simultaneously.

Image: The bottom of the JBL Vibe Flex charging case, highlighting the USB-C charging port. This is where the charging cable connects.
2. Bluetooth Pairing
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, computer), go to the Bluetooth settings.
- Select "JBL Vibe Flex" from the list of available devices.
- Once connected, a confirmation sound will play, and the LED indicator on the earbuds may change.
- For subsequent use, the earbuds will automatically connect to the last paired device when taken out of the case.
Operating Instructions
Wearing the Earbuds
Gently insert the earbuds into your ears, ensuring a comfortable and secure fit. Adjust them slightly to achieve optimal sound quality and noise isolation.

Image: A side view of the JBL Vibe Flex earbuds, illustrating their ergonomic design for proper fit in the ear.
Touch Controls
The JBL Vibe Flex earbuds feature intuitive touch controls on each earbud. The specific functions can often be customized via the JBL Headphones app.
- Single Tap: Play/Pause music, Answer/End call.
- Double Tap: Skip forward, Reject call.
- Triple Tap: Skip backward.
- Tap and Hold: Activate voice assistant, Toggle noise control modes (if applicable).
Making and Receiving Calls
- Answer a Call: Single tap on either earbud.
- End a Call: Single tap on either earbud during a call.
- Reject a Call: Double tap on either earbud.
Battery Life
The earbuds provide up to 8 hours of playback on a single charge, with an additional 24 hours provided by the charging case, totaling up to 32 hours of combined battery life. Actual battery life may vary based on volume level and audio content.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Gently remove any earwax or debris from the eartips and speaker mesh using a small, soft brush or cotton swab.
Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store the case and earbuds in a cool, dry place, away from direct sunlight and extreme temperatures.
- Use the provided protective pouch for added protection during travel.

Image: The JBL Vibe Flex charging case in its closed state, next to the protective pouch. This illustrates how the product can be stored securely.
Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds not pairing | Ensure earbuds are charged. Turn off and on Bluetooth on your device. Forget "JBL Vibe Flex" from your device's Bluetooth list and re-pair. |
| No sound from one earbud | Place both earbuds back in the case, close it, wait a few seconds, then open and try again. Check device's audio balance settings. |
| Low volume | Increase volume on both your device and the earbuds (if applicable via app). Clean any debris from the earbud speaker mesh. |
| Charging issues | Ensure the charging cable is securely connected. Try a different USB port or power adapter. Clean charging contacts on earbuds and case. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | JBLVFLEXBEG-Pouch |
| Connectivity Technology | Wireless (Bluetooth) |
| Frequency Range | 20 Hz - 20,000 Hz |
| Battery Life (Earbuds) | Up to 8 hours |
| Total Battery Life (with Case) | Up to 32 hours |
| Built-in Microphone | Yes |
| Color | Beige |
| Item Weight | 4.2 ounces |
| Included Components | Cable, Eartip, Protective Case |
Warranty and Support
JBL products are covered by a limited warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official JBL website. For technical support, troubleshooting assistance, or to inquire about repairs, please contact JBL customer service through their official support channels.
You can often find additional support and FAQs on the JBL Store on Amazon or the main JBL website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







