COMOMY 2-in-1 Baby Changing Pad with Digital Scale User Manual

1. Introduction

Thank you for choosing the COMOMY 2-in-1 Baby Changing Pad with Digital Scale. This innovative product combines a comfortable changing surface with a precise digital scale, designed to simplify baby care and monitor your child's growth effectively. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Image 1.1: The COMOMY 2-in-1 Baby Changing Pad with Digital Scale.

2. Safety Information

• Always keep one hand on your baby while they are on the changing pad, even when the safety belt is fastened.
• Ensure the changing pad is placed on a stable, flat, and secure surface.
• Do not leave your baby unattended on the changing pad.
• Keep the product away from direct heat sources and open flames.
• Regularly inspect the safety belt and the pad for any signs of wear or damage. Discontinue use if damaged.
• The maximum recommended weight capacity for the scale is 60 kg. Do not exceed this limit.
• Remove the plastic film from the battery before first use.

3. Setup

3.1 Unpacking

1. Carefully remove all components from the packaging.
2. Verify that all parts are present and undamaged.
3. Dispose of packaging materials responsibly.

3.2 Battery Installation

The digital scale requires batteries for operation. Locate the battery compartment on the underside of the scale unit. Insert the required batteries, ensuring correct polarity. Remove any protective plastic film from the battery before installation.

3.3 Placement

Place the changing pad on a sturdy, flat surface such as a changing table or dresser. Ensure the surface is wide enough to fully support the pad and that there is no risk of the pad sliding or tipping.

Image 3.1: Proper placement of the changing pad on a stable surface.

4. Operating Instructions

4.1 Using the Changing Pad

• Place your baby gently on the center of the changing pad.
• Fasten the adjustable safety belt securely around your baby to prevent rolling. Ensure it is snug but not too tight.
• The high-contoured sides provide additional safety and comfort.

Image 4.1: A baby safely positioned on the changing pad with the safety belt fastened.

4.2 Using the Digital Scale

The integrated digital scale allows for precise weight tracking of your baby. The scale unit features a pull-out design for convenient access.

Image 4.2: The digital scale display showing a clear LED reading.

Power On/Off

• Press the ON/TARE button briefly to turn on the scale.
• Press and hold the ON/TARE button to turn off the scale.
• The scale will automatically shut off after 120 seconds of inactivity to conserve battery.

Tare Function

The Tare function allows you to subtract the weight of a blanket or towel before weighing your baby, ensuring an accurate measurement of your baby's weight only.

1. Place a blanket or towel on the changing pad.
2. Press the ON/TARE button. The display will show '0.00' or '0.000', indicating the weight of the blanket has been tared.
3. Gently place your baby on the blanket to measure their weight.

Hold Function

The Hold function locks the displayed weight, even if your baby moves, providing a stable reading.

• After placing your baby on the scale, press the HOLD button.
• The weight will be locked on the display.
• Press HOLD again to release the function.

Unit Conversion

The scale supports five unit conversions: g, kg, oz, lb, and lb:oz.

• Press the UNIT button to cycle through the available units.
• The selected unit will be displayed on the screen.

Image 4.3: Visual guide for Tare, Hold, and Unit Conversion functions.

5. Maintenance

5.1 Cleaning

The changing pad is made from soft, waterproof EVA material, making it easy to clean.

• Wipe the surface of the changing pad with a damp cloth and mild soap.
• Do not use abrasive cleaners or harsh chemicals, as these may damage the material.
• Ensure the pad is completely dry before placing your baby on it.
• For the digital scale unit, wipe with a dry or slightly damp cloth. Do not immerse the scale in water.

Image 5.1: Cleaning the waterproof EVA surface of the changing pad.

5.2 Storage

When not in use, the pull-out scale structure can be inserted back into the body of the changing pad for compact storage. Store the product in a cool, dry place away from direct sunlight.

6. Troubleshooting

• Scale not turning on: Check if batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
• Inaccurate readings: Ensure the scale is on a flat, stable surface. Avoid placing the scale near electronic devices that may cause interference. Recalibrate by turning off and on, then using the Tare function.
• Display error: If an error code appears, try turning the scale off and then on again. If the error persists, contact customer support.

7. Specifications

8. Official Product Video

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact COMOMY customer service directly. Keep your purchase receipt as proof of purchase.