HRVEOCEI Manual Recliner Chair (Model: Lazy Boy Recliner Chair) Instruction Manual

Introduction

Thank you for choosing the HRVEOCEI Manual Recliner Chair. This manual provides essential instructions for the safe assembly, operation, and maintenance of your new recliner. Please read this guide thoroughly before use and retain it for future reference.

Safety Information

WARNING: Exceeding the weight limit may result in mechanical failure. Improper use of the recline function could lead to tipping or mechanical failure. Always ensure the chair is on a stable, level surface before use or reclining.

• Do not allow children to play on or around the recliner unsupervised.
• Keep hands and feet clear of the reclining mechanism when adjusting the chair.
• Avoid placing heavy objects on the footrest when it is extended.
• Ensure all connections are secure before sitting in the chair.

Package Contents

Before beginning assembly, verify that all components are present. If any parts are missing or damaged, please contact customer support.

• Seat Base with Reclining Mechanism
• Backrest
• Left Armrest
• Right Armrest
• Cup Holders (2)
• Power Adapter (for massage/heat functions)
• Hand Controller (for massage/heat functions)
• Assembly Hardware (bolts, Allen wrench)
• Instruction Manual

Image: All components of the HRVEOCEI Manual Recliner Chair laid out for assembly, including the seat base, backrest, armrests, cup holders, and hardware.

Assembly Instructions

Assembly is designed to be straightforward. Follow these steps carefully for proper setup.

Step 1: Unpack and Identify Parts

• Carefully open the packaging and remove all components.
• Identify the main seat frame, backrest, armrests, and any accessories.

Step 2: Attach Armrests to Seat Base

• Locate the metal connectors on the inside of each armrest.
• Align these connectors with the corresponding slots on the sides of the seat base.
• Slide the armrests down firmly until they click into place, ensuring they are securely engaged.

Step 3: Install Backrest

• Position the backrest over the metal posts at the rear of the seat base.
• Lower the backrest onto the posts, applying gentle pressure until it locks securely into place.

Step 4: Connect Wiring for Massage and Heat

• Access the wiring located under the seat or behind the backrest.
• Connect the massage unit lines (white to white, red to red, black to black) and the power lines.
• Plug the hand controller into the main wiring harness.
• Connect the power adapter to the chair's power input and then to a wall outlet.

Step 5: Install Cup Holders and Secure Fabric

• Insert the cup holders into the designated slots on the armrests.
• Ensure any fabric flaps or Velcro straps are secured to cover the frame and wiring neatly.

Operating Instructions

Reclining Function

• To recline, locate the manual pull tab on the side of the chair (typically on the right).
• Pull the tab to release the footrest. Lean back gently to adjust the backrest to your desired angle (from 90° upright to 150° fully reclined).
• To return to an upright position, push the footrest down with your legs and lean forward. The backrest will follow.

Image: This diagram illustrates the various reclining positions of the chair, including 90 degrees for reading, 110 degrees for watching TV, and 160 degrees for sleeping, demonstrating the adjustable backrest and footrest.

Massage and Heat Functions

• Use the wired hand controller to activate and adjust the massage and heat settings.
• The chair features 4 massage parts and 5 massage modes.
• Adjust vibration strength and activate the heated function for the lumbar area as desired.

Image: This infographic details the multi-function massage features of the recliner, including 4 massage parts, 5 massage modes, a heated function, and adjustable vibration strength.

Key Features

• Oversized Comfort: Dimensions of 38.5"W × 41"D × 42"H, supporting up to 330 pounds. Ideal for users 5'1"-5'9".
• Ergonomic Design: Padded seat, backrest, and armrests conform to body curves for maximum relaxation.
• 360° Swivel & Rocker: Enjoy full rotation and gentle rocking motion for enhanced comfort.
• Convenient Storage: Equipped with 2 pockets and cup holders for easy access to essentials.
• Durable Construction: Built with solid wood and steel for stability and longevity.

Image: Close-up details of the recliner chair, showcasing its soft cushion, foot support board, wide backrest, large side pocket, and integrated arms for user convenience.

Maintenance

• Cleaning: For fabric surfaces, spot clean with a mild detergent and a damp cloth. Avoid harsh chemicals.
• Mechanism: Periodically check all bolts and connections to ensure they are tight. Lubricate moving parts of the reclining mechanism if necessary.
• General Care: Avoid prolonged exposure to direct sunlight to prevent fading. Keep away from excessive moisture.

Troubleshooting

• Recliner not engaging: Ensure the side lever is fully pulled. Check for any obstructions in the reclining mechanism.
• Massage/Heat not working: Verify that the power adapter is securely plugged into both the chair and the wall outlet. Check all wiring connections. Ensure the hand controller is properly connected.
• Unstable chair: Confirm that all assembly bolts are tightened. Ensure the chair is on a flat, even surface.

Specifications

Warranty and Customer Support

Your satisfaction is our top priority. For any setup inquiries, troubleshooting assistance, or warranty claims, please contact our dedicated customer advisory team. We are available to assist you.

For further assistance, please visit the official HRVEOCEI Store: HRVEOCEI Store