Pipishell Full-Motion Long-Arm TV Wall Mount User Manual

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Pipishell Full-Motion Long-Arm TV Wall Mount, model PILF18. This mount is designed to securely hold 32-75 inch televisions weighing up to 100 lbs, offering extensive flexibility with its 32.37-inch extension, swivel, tilt, and leveling capabilities. Please read this manual thoroughly before installation to ensure safe and correct usage.

Image: The Pipishell Full-Motion Long-Arm TV Wall Mount, showcasing its articulating arms, TV mounting plate, wall plate, and included accessories such as a bubble level and cable ties.

2. Safety Information

Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:

• Do not exceed the maximum weight capacity of 100 lbs (45.3 kg).
• Ensure the wall structure can safely support the combined weight of the mount and the television.
• This mount is designed for installation on solid concrete, brick, or a single wood stud. DO NOT mount on drywall alone.
• Always use a stud finder to locate wood studs accurately.
• Verify that the VESA mounting pattern of your TV is compatible with the mount (200x100mm to 600x400mm).
• Use all provided hardware. Do not substitute parts unless explicitly instructed.
• If you are unsure about any part of the installation process, seek assistance from a qualified professional.
• Keep children and pets away from the installation area during setup.
• Regularly check all connections and fasteners to ensure they remain secure.

3. Package Contents

Before beginning installation, verify that all components are present and undamaged. Refer to the parts list in your physical manual for specific quantities and identifiers. Typical contents include:

• Wall Plate Assembly
• TV Brackets (2 pieces)
• Mounting Hardware (various screws, washers, spacers for TV and wall)
• Concrete Anchors (if applicable)
• Bubble Level
• Cable Ties
• Installation Template

4. Specifications

Image: Visual representation of the mount's wide compatibility, indicating support for 32-75 inch TVs, various VESA patterns (200x100mm to 600x400mm), and a maximum load of 100 lbs. It also shows compatibility with solid concrete, wood stud, and brick walls.

Image: Illustrates the range of TV sizes (32-75 inches) and the maximum weight capacity (100 lbs) that the mount can support.

Image: Details the compatible VESA mounting patterns, ranging from a minimum of 200x100mm to a maximum of 600x400mm, with a visual example of VESA hole placement on a TV back.

Image: Shows the three types of walls suitable for installation: wood stud, solid concrete, and brick. A warning explicitly states not to install on drywall alone.

5. Setup and Installation

This section outlines the general steps for installing your Pipishell TV wall mount. For detailed, step-by-step instructions and specific hardware identification, please refer to the dedicated installation manual included with your product.

5.1 Pre-Installation Checklist

• Confirm your TV's weight and VESA pattern are within the mount's specifications.
• Identify your wall type (wood stud, concrete, or brick).
• Gather necessary tools (e.g., drill, stud finder, level, measuring tape, pencil, socket wrench).
• Ensure you have all package contents as listed in Section 3.

5.2 Installation Steps Overview

1. Attach TV Brackets: Secure the two vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the provided hardware kit. Ensure they are centered and level.
2. Mount Wall Plate:
   • Locate the desired mounting position on your wall. Use a stud finder to find a single wood stud if mounting on wood. For concrete or brick, mark the drill holes directly.
   • Use the provided template to mark the drill holes for the wall plate.
   • Drill pilot holes according to the manual's specifications for your wall type.
   • Secure the wall plate to the wall using the appropriate lag bolts and washers. Ensure the wall plate is level using the included bubble level.
3. Hang TV: Carefully lift the television with the attached brackets and hook them onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanisms as per the manual.

Image: A three-step visual guide illustrating the installation process: 1) Attaching the TV brackets to the television, 2) Mounting the wall plate to the wall, and 3) Hanging the TV onto the mounted wall plate.

6. Operating Instructions

Once installed, your Pipishell Full-Motion TV Wall Mount offers various adjustments to optimize your viewing experience.

6.1 Extension and Retraction

Gently pull or push the television to extend it up to 32.37 inches from the wall or retract it to a low profile of 3.12 inches. Ensure smooth, controlled movements.

6.2 Swivel Adjustment

The mount allows for a +/- 90-degree swivel. Carefully pivot the television left or right to achieve your desired viewing angle from different positions in the room.

6.3 Tilt Adjustment

Adjust the vertical tilt of your TV from +5 degrees (upward) to -15 degrees (downward) to reduce glare or optimize viewing from various heights. This adjustment is tool-free; typically, you can loosen knobs on the TV brackets, adjust the angle, and then tighten them.

6.4 Post-Installation Leveling

If your TV appears slightly unlevel after installation, the mount allows for a +/- 4-degree leveling adjustment. Consult your specific manual for the mechanism to perform this fine-tuning, which usually involves adjusting screws on the TV brackets.

Image: Illustrates the mount's full range of motion, including +/- 90-degree swivel, extension up to 32.37 inches, retraction to 3.12 inches, and tool-free tilt from +5 to -15 degrees.

Image: Demonstrates the post-installation leveling feature, allowing for a fine adjustment of +/- 4 degrees to ensure the TV is perfectly horizontal.

7. Maintenance

Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.

• Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Fastener Check: Periodically (e.g., every 6 months) check all screws and bolts, especially those securing the mount to the wall and the TV to the mount, to ensure they remain tight. Do not overtighten.
• Movement Check: Occasionally move the mount through its full range of motion (extension, swivel, tilt) to ensure smooth operation. If any stiffness or unusual noise is noted, inspect the pivot points.

8. Troubleshooting

This section addresses common issues you might encounter.

9. Warranty and Customer Support

Pipishell stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell website.

If you have any questions regarding installation, product selection, or require technical assistance, please contact our U.S.-based product support team:

• Email: support@pipishell.com
• Brand Store: Pipishell Amazon Store

Please have your model number (PILF18) and purchase information ready when contacting support.