Tribesigns 70.9-Inch Narrow Sofa Table Instruction Manual

1. Introduction

Thank you for choosing the Tribesigns 70.9-Inch Narrow Sofa Table. This manual provides essential information for the safe assembly, proper use, and maintenance of your new console table. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. Safety Information

Warning: This product requires assembly using a screwdriver. Always follow the assembly instructions carefully to ensure stability and safety. Do not overload the table; it has a maximum weight recommendation of 150 pounds (68 kg). Ensure all connections are secure before use. Keep small parts away from children during assembly.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop (Engineered Wood)
• Base (Engineered Wood)
• Metal Frame Supports (Arc-shaped)
• Assembly Hardware (Screws, bolts, etc.)
• Assembly Tool (Hex key, if included)

4. Setup and Assembly

Assembly of this sofa table requires careful attention to detail. A screwdriver (not included) will be needed in addition to any provided tools.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the included assembly diagram to identify each component.
3. Attach Metal Frame to Base: Secure the arc-shaped metal frame supports to the wooden base. Pay close attention to the orientation of the screw heads and the curvature of the metal pieces to ensure correct alignment. Incorrect placement of the legs will require disassembly and re-orientation.
4. Attach Tabletop: Carefully align the tabletop with the top of the metal frame supports and secure it using the provided hardware.
5. Tighten All Fasteners: Once all parts are assembled, gently tighten all screws and bolts. Do not overtighten.

5. Operating and Usage

The Tribesigns 70.9-Inch Narrow Sofa Table is designed for various display and organizational purposes within your home.

• Placement: Ideal for entryways, hallways, behind a couch, or as a TV console. Its narrow design allows it to fit in various spaces.
• Weight Capacity: The table is designed to support a maximum weight of 150 pounds (68 kg). Do not exceed this limit to prevent damage or injury.
• Surface Use: Use the tabletop for displaying decorative items, photo frames, books, or other light essentials.

6. Maintenance

Proper care will help maintain the appearance and longevity of your sofa table.

• Cleaning: For general cleaning, wipe the surface with a damp cloth. For drying and to prevent water spots, follow immediately with a dry cloth.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions, as these can damage the finish of the engineered wood and metal.
• Protect Surface: Use coasters under drinks and placemats under hot items to prevent marks and heat damage.
• Regular Inspection: Periodically check all fasteners to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

If you encounter issues during assembly or use, refer to the following common solutions:

• Difficulty with Assembly / Misaligned Parts: If parts do not fit together correctly, especially the metal frame supports, carefully review the assembly diagrams. It is common for the legs to be installed incorrectly if the orientation of the screw heads or the arc direction is not precisely followed. Disassemble the problematic section and re-attempt, paying close attention to the visual instructions.
• Wobbling Table: Ensure all screws and bolts are fully tightened. Check that the table is placed on a level surface. If the floor is uneven, consider using furniture pads or shims under the base.

8. Specifications

9. Warranty and Support

For warranty information, replacement parts, or further assistance, please contact Tribesigns customer support directly. Refer to your purchase documentation for specific contact details.