XTUGA TS15 15-Channel Professional Sound Board Mixer User Manual

1. Introduction

The XTUGA TS15 is a versatile 15-channel professional sound board mixer designed for a wide range of audio applications, including live stage performances, studio recording, and DJ events. This mixer integrates advanced features such as independent +48V phantom power, a 7-band graphic equalizer, 99 built-in DSP effects, Bluetooth connectivity, and a USB interface for seamless audio playback and recording. This manual provides detailed instructions for the proper setup, operation, and maintenance of your XTUGA TS15 mixer.

2. Product Overview

The XTUGA TS15 mixer offers comprehensive control over your audio. Familiarize yourself with the layout and functions of the various components.

Key Features:

15 Input Channels: Comprising 13 mono microphone/line inputs and 1 stereo input.
Independent +48V Phantom Power: Each microphone channel features a selectable +48V phantom power switch, supporting both condenser and dynamic microphones.
Built-in 99 DSP Effects: A digital signal processor with 99 selectable effects to enhance your sound for various environments.
7-Band Graphic Equalizer: Provides precise control over the overall mix's frequency response.
Bluetooth Connectivity: Allows wireless audio streaming from compatible devices like smartphones and tablets.
USB Interface: Supports MP3 playback from a USB drive and direct connection to a computer for recording and playback.
Channel Mute Switches: Individual mute controls for each input channel.

XTUGA TS15 15-Channel Mixer Front Panel — Figure 2.1: Front panel view of the XTUGA TS15 mixer, showing all input channels, controls, and the main output section.

XLR Input Ports — Figure 2.2: Close-up of the XLR input ports, which are compatible with microphones and line-level sources.

3. Setup

Follow these steps to set up your XTUGA TS15 mixer.

Power Connection: Connect the provided power cable to the mixer's power input and then to a suitable electrical outlet. Ensure the mixer's power switch is in the OFF position before connecting.
Microphone Connections: For microphones, use XLR cables to connect to the MIC/LINE inputs (channels 1-13). For condenser microphones, activate the +48V phantom power for the respective channel.
Line Input Connections: For line-level instruments or devices, use 1/4" TRS or TS cables to connect to the MIC/LINE inputs. The stereo input (channel 14/15) uses 1/4" TRS jacks for left and right channels.
Main Output Connection: Connect the MAIN OUT (XLR or 1/4" TRS) to your amplifier or powered speakers using appropriate cables.
USB/Computer Connection: To use the mixer with a computer for recording or playback, connect a USB Type-B cable from the mixer's USB port to your computer.
Power On: Once all connections are secure, switch the mixer's power to the ON position.

+48V Phantom Power Switch — Figure 3.1: Each channel features an independent +48V phantom power switch, indicated by a red button, for condenser microphones.

4. Operating Instructions

4.1 Basic Operation

Gain Adjustment: Use the GAIN knob at the top of each channel strip to set the input level. Adjust until the PEAK LED flashes only occasionally.
Channel Equalization: Each channel has HI, MID, and LOW knobs to adjust the treble, midrange, and bass frequencies respectively.
Channel Fader: Use the vertical fader for each channel to control its volume in the main mix.
Main Output Faders: The L and R faders control the overall volume of the main stereo output.
Mute Switch: Press the MUTE button on any channel to silence its output without changing fader positions.

Mute Button Close-up — Figure 4.1: Close-up of an individual channel mute button, allowing quick silencing of a specific input.

4.2 DSP Effects Processor

The TS15 features 99 built-in digital effects.

Effect Selection: Turn the PROGRAM knob to scroll through the 99 available effects. The selected effect number will be displayed on the digital screen.
Apply Effect: Press the PROGRAM knob to confirm your selection.
Effect Send: Use the FX knob on each channel to send a portion of that channel's signal to the effects processor.
Effect Return: Adjust the FX RETURN fader to control the overall level of the processed effect in the main mix.

DSP Effects Adjustment — Figure 4.2: The DSP section allows selection and application of 99 different reverb and other effects. Turn the knob to select, then press to apply.

99 DSP Display — Figure 4.3: Digital display showing the selected DSP effect number.

4.3 Bluetooth Operation

To stream audio wirelessly:

Activate Bluetooth: Ensure the mixer's Bluetooth function is enabled. The display will show a Bluetooth icon or similar indicator.
Pair Device: On your mobile device (smartphone, tablet), search for Bluetooth devices and select "MIX-MP3 BT".
Playback: Once paired, you can play audio from your device, and it will be routed through the mixer. Adjust the MP3/Bluetooth channel fader for volume control.

Bluetooth Connectivity — Figure 4.4: The mixer supports Bluetooth for wireless audio streaming from compatible devices.

4.4 USB Playback and Recording

The USB interface allows for MP3 playback from a USB drive and connection to a computer.

USB Drive Playback: Insert a USB flash drive containing MP3 audio files into the USB port. Use the transport controls (Play/Pause, Skip) on the mixer to manage playback.
Computer Connection: Connect the mixer to your computer via a USB Type-B cable. The mixer will function as an audio interface, allowing you to record the main mix to your computer or play audio from your computer through the mixer.

USB/Computer Support — Figure 4.5: The mixer's USB port supports both USB drive playback and connection to a computer for recording and audio playback.

4.5 7-Band Graphic Equalizer

Use the 7-band graphic equalizer to fine-tune the overall frequency response of your main mix. Adjust the faders for each frequency band (e.g., 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz) to boost or cut specific frequencies.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your mixer.

Cleaning: Regularly wipe the mixer's surface with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
Storage: When not in use, store the mixer in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive dust or moisture.
Cable Management: Ensure all cables are properly routed and secured to prevent strain on connectors and accidental disconnections. Avoid kinking or bending cables sharply.
Ventilation: Ensure adequate airflow around the mixer to prevent overheating. Do not block ventilation openings.

6. Troubleshooting

If you encounter issues with your XTUGA TS15 mixer, refer to the following common problems and solutions.

Problem	Possible Cause	Solution
No sound output	Power not connected or switched on Main output faders are down Channel faders are down Mute switch engaged on channel or main Cables incorrectly connected or faulty	Check power connection and switch Raise MAIN OUT faders Raise individual channel faders Disengage mute switches Verify all cable connections and test cables
Distorted sound	Input gain too high Output level too high Faulty cable or microphone	Reduce GAIN knob for the affected channel Lower MAIN OUT faders Test with different cables and microphones
Condenser mic not working	+48V phantom power not activated Faulty microphone or cable	Press the +48V button for the specific channel Test with a different condenser microphone and XLR cable
Bluetooth not connecting	Bluetooth not enabled on mixer Device not in pairing mode Incorrect device selected	Ensure mixer's Bluetooth is active Put your mobile device in pairing mode Select "MIX-MP3 BT" from your device's Bluetooth list
USB drive not playing MP3s	USB drive not formatted correctly Files are not MP3 format USB drive is faulty	Ensure USB drive is FAT32 formatted Verify audio files are in MP3 format Try a different USB drive

7. Specifications

Detailed technical specifications for the XTUGA TS15 mixer.

Model: TS15
Channels: 15 (13 Mono Mic/Line, 1 Stereo Line)
Phantom Power: +48V (Independent per channel)
Equalization: 3-band EQ per channel (HI, MID, LOW), 7-band Graphic EQ on main output
Effects: 99 DSP Effects Processor
Connectivity: Bluetooth, USB (Type B for computer, Type A for U Disk MP3)
Audio Input: USB
Output Connector Type: USB Type B
Power Source: Cable Eléctrico (AC Power)
Item Weight: 2.62 Kilograms
Manufacturer: XTUGA

XTUGA TS15 Product Dimensions and Contents — Figure 7.1: The XTUGA TS15 mixer with approximate dimensions (63cm x 39cm x 13.5cm) and included accessories: instruction manual and power cable.

8. Safety Information

Please read and adhere to the following safety guidelines:

Do not expose this appliance to rain or moisture.
Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
Ensure proper grounding of the power supply.
Avoid placing the unit near heat sources or in direct sunlight.
Always disconnect the power cable before cleaning or performing any maintenance.

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact XTUGA customer service through their official website or the contact information provided with your product.

XTUGA TS15