Introduction
Welcome to the OPN Sound Swym+ Bone Conduction Headphones user manual. These open-ear headphones are designed for versatility, offering a waterproof solution for swimming, tri-athlete training, and everyday use. Featuring bone conduction technology, Bluetooth 5.3 connectivity, and a 32GB internal hard drive for direct music uploads, the Swym+ provides a unique audio experience while keeping your ears open to your surroundings.
This manual provides essential information on setting up, operating, maintaining, and troubleshooting your Swym+ headphones to ensure optimal performance and longevity.
What's in the Box
Upon unboxing your OPN Sound Swym+ headphones, please verify that all the following components are included:
- OPN Sound Swym+ Bone Conduction Headphones
- Charging Cable
- Protective Case
- User Manual (this document)
Image: OPN Sound Swym+ headphones shown with the charging cable and protective case.
Product Features
- Bone Conduction Technology: Delivers audio through your cheekbones, leaving your ears open.
- 32GB Internal Hard Drive: Store thousands of songs directly on the device.
- Direct Music Uploads: Compatible with iTunes (M4a) and MP3 files.
- Bluetooth 5.3: Stable and efficient wireless connectivity.
- IP68 Waterproof Rating: Fully submersible and protected against dust.
- 7-Hour Battery Life: Extended listening time on a single charge.
- Open-Ear Design: Ensures comfort, safety, and situational awareness.
- Silicone Coated Comfort: Soft, skin-friendly material for prolonged wear.
- Secure Fit: Designed to stay in place during rigorous activities.
Setup
1. Charging the Headphones
Before first use, fully charge your OPN Sound Swym+ headphones. Connect the provided charging cable to the charging port on the headphones and plug the other end into a USB power adapter (not included) or a computer's USB port.
- A full charge typically takes approximately 1.5-2 hours.
- The LED indicator will show charging status (e.g., red for charging, blue for fully charged).
Image: Rear view of the OPN Sound Swym+ headphones, highlighting the control panel and charging area.
2. Powering On/Off
- To Power On: Press and hold the Power button for 3 seconds until the LED indicator flashes blue and you hear a power-on prompt.
- To Power Off: Press and hold the Power button for 5 seconds until the LED indicator flashes red and you hear a power-off prompt.
3. Bluetooth Pairing
To connect your Swym+ headphones to a Bluetooth-enabled device (e.g., smartphone, tablet):
- Ensure the headphones are powered off.
- Press and hold the Power button for 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device, go to Bluetooth settings and search for available devices.
- Select "OPN Sound Swym+" from the list.
- Once connected, the LED indicator will flash blue periodically, and you will hear a confirmation tone.
4. Uploading Music to Internal Storage (32GB)
The Swym+ headphones feature 32GB of internal storage for direct music playback, ideal for activities where Bluetooth connectivity might be limited (e.g., underwater swimming).
- Connect the headphones to your computer using the provided charging cable. The computer should recognize the headphones as a removable disk.
- Open the recognized disk drive.
- Drag and drop your desired MP3 or M4a (iTunes) audio files directly into the headphone's storage folder.
- Once files are transferred, safely eject the headphones from your computer before disconnecting the cable.
Note: Ensure your music files are in MP3 or M4a format for compatibility.
Operating Instructions
Wearing the Headphones
Place the headphones with the transducers resting on your cheekbones, just in front of your ears. The band should wrap around the back of your head. Adjust for a comfortable and secure fit.
Image: A swimmer wearing OPN Sound Swym+ headphones during an underwater activity, demonstrating proper placement.
Controls
The Swym+ headphones feature intuitive controls for media playback and mode switching:
- Power Button: Power On/Off, Play/Pause (short press), Answer/End Call (short press).
- Volume Up (+): Increase volume (short press), Next track (long press).
- Volume Down (-): Decrease volume (short press), Previous track (long press).
- Mode Button: Switch between Bluetooth mode and MP3 player mode (internal storage).
Using in Water (IP68 Waterproof)
The IP68 rating ensures your Swym+ headphones are fully protected against dust and can be submerged in water up to 1.5 meters for 30 minutes. For swimming, it is recommended to use the internal 32GB MP3 player mode, as Bluetooth signals do not transmit effectively underwater.
- Ensure the charging port cover is securely closed before submerging.
- Switch to MP3 mode for optimal performance during swimming.
- After use in chlorinated or saltwater, rinse the headphones with fresh water and dry thoroughly.
Maintenance
Proper care will extend the life and performance of your OPN Sound Swym+ headphones:
- Cleaning: Wipe the headphones with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Drying: After use in water, gently shake off excess water and allow the headphones to air dry completely before charging or storing.
- Storage: Store the headphones in their protective case in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging Port: Keep the charging port clean and dry. Ensure the port cover is sealed when not charging, especially before water exposure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones won't power on. | Low battery. | Charge the headphones fully. |
| Cannot pair via Bluetooth. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing red/blue). Turn device Bluetooth off/on. Move closer to device. |
| No sound from headphones. | Volume too low; wrong mode selected; corrupted audio file. | Increase volume. Ensure correct mode (Bluetooth/MP3) is selected. Re-upload audio files. |
| Music transfer fails. | Incorrect file format; loose cable connection; computer driver issue. | Ensure files are MP3 or M4a. Check cable connection. Try a different USB port or computer. |
| Poor sound quality underwater. | Using Bluetooth mode underwater. | Switch to MP3 player mode for underwater use. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Swym+ |
| Model Number | OS7000 |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication | Bluetooth 5.3 |
| Audio Driver Type | Bone Conduction Driver |
| Internal Storage | 32GB |
| Supported Audio Formats | MP3, M4a (iTunes) |
| Water Resistance Level | IP68 Waterproof |
| Battery Life | Up to 7 Hours |
| Ear Placement | Open Ear |
| Control Type | Media Control, App Control |
| Item Weight | 0.34 Kilograms (approx. 12 ounces) |
| Included Components | Cable, Protective Case, User Manual |
| UPC | 850061193001 |
Official Product Videos
OPN Sound Swym+ Overview
Video: A comprehensive overview of the OPN Sound Swym+ headphones, demonstrating key features and usage scenarios. (Duration: 2:06)
Quick Feature Highlight
Video: A short video highlighting the main features and benefits of the OPN Sound Swym+ headphones. (Duration: 0:42)
Warranty and Support
OPN Sound products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official OPN Sound website.
If you encounter any issues or have questions not covered in this manual, please contact OPN Sound customer support for assistance. Contact information can typically be found on the product packaging or the official brand website.
For the latest information and support, please visit the OPN Sound Store on Amazon.