Amkette Powerpro Air 900 23W 3-in-1 MagSafe Wireless Charger User Manual

Introduction

The Amkette Powerpro Air 900 is a 23W 3-in-1 MagSafe Wireless Charger designed for simultaneous charging of compatible iPhone, AirPods, and Apple Watch models. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

What's in the Box

Upon unboxing your Amkette Powerpro Air 900, verify that all the following components are included:

• Wireless Charger
• USB-C to USB-C 3A Cable
• MagSafe Ring (for non-MagSafe compatible phones)
• Centering Scale (for MagSafe ring placement)
• User Manual

Setup Instructions

1. Connect to Power: Connect the provided USB-C to USB-C 3A cable to the charging station and then to a 20W or higher Power Delivery (PD) wall adapter (not included). Ensure the adapter is capable of delivering sufficient power for optimal charging. Do not power the charger from a laptop.
2. Place Apple Watch: Position your Apple Watch on the dedicated charging stand. The magnetic connection will secure it in place, and charging will begin automatically.
3. Place AirPods: Place your AirPods charging case on the designated flat charging pad at the base of the station.
4. Place iPhone:
   • For MagSafe Compatible iPhones (iPhone 12 Series and Newer): Simply place your iPhone on the magnetic charging plate. It will snap securely into place, allowing for both portrait and landscape viewing.
   • For Non-MagSafe Compatible Phones (iPhone 8, X, 11, and Android Phones): Use the included MagSafe ring and centering scale for proper alignment. Clean the back of your phone, use the centering scale to accurately place the MagSafe ring, and then gently press it onto the phone's back. Once the ring is attached, your phone can be magnetically mounted to the charging plate.

Operating Instructions

Charging Functionality

The Powerpro Air 900 provides a total output of 23W, distributed as follows:

• iPhone: Up to 15W fast charging.
• AirPods: 5W charging.
• Apple Watch: 3W charging.

Ensure devices are properly aligned on their respective charging areas for efficient power transfer. The edge lighting system provides visual feedback on the charging status of your phone.

Ambient Night Light

The charging station includes an ambient night light with touch controls. Tap the touch control button to cycle through three color themes: warm, soft, and cool. The edge lighting around the base indicates the charging status for the phone and automatically shuts off after 1 minute for convenience.

Adjustable Phone Holder

The magnetic phone holder features an adjustable plate, allowing you to position your phone in either portrait or landscape orientation. This flexibility is ideal for viewing content, video calls, or using standby mode while charging.

Features Overview

• 3-in-1 Wireless Charging: Simultaneously charges iPhone, AirPods, and Apple Watch, reducing cable clutter.
• 23W Total Power Output: Provides efficient and fast charging for all connected devices.
• Ambient Night Light: Features touch controls with warm, soft, and cool color themes, and edge lighting for charging status indication.
• MagSafe Ring with Centering Scale: Ensures secure and efficient charging for compatible devices, including an additional ring for non-MagSafe phones.
• Tempered Glass Adjustable Front: The adjustable charging plate serves as an efficient stand for various phone sizes, optimizing wireless charging.
• Elegant and Durable Design: Constructed with metal, PC, ABS, tempered glass front, and silicon parts for enhanced stability and longevity.
• Built-in Protection Technology: Incorporates safety circuits to protect against high voltage, overcurrent, low voltage, and overheating, promoting optimal battery health.

Maintenance

To maintain the performance and appearance of your Powerpro Air 900, follow these guidelines:

• Keep the charging station clean by wiping it with a soft, dry cloth.
• Avoid using abrasive cleaners or solvents that may damage the surface.
• Ensure the charging pads are free from dust and debris to maintain optimal contact with your devices.
• Avoid exposing the device to extreme temperatures or humidity.

Troubleshooting

Device not charging:

• Ensure the charging station is properly connected to a 20W or higher PD wall adapter.
• Verify that the USB-C cable is securely plugged into both the charger and the power adapter.
• Check that your device (iPhone, AirPods, Apple Watch) is correctly placed and aligned on its respective charging area.
• If using a non-MagSafe phone, ensure the MagSafe ring is correctly attached and aligned.
• Remove any thick phone cases that might interfere with wireless charging.

Slow charging:

• Confirm that you are using a 20W or higher Power Delivery (PD) wall adapter. Lower wattage adapters may result in slower charging speeds.
• Avoid powering the charging station from a laptop's USB port, as it typically does not provide sufficient power output.
• Ensure your phone case is MagSafe compatible or thin enough not to impede charging efficiency.

Ambient night light not working:

• Verify the charging station is powered on.
• Gently tap the touch control button to activate or change the light modes.

Specifications

Warranty and Support

The Amkette Powerpro Air 900 includes a 1-year warranty from the date of purchase, ensuring quality and reliability. For technical support, warranty claims, or further assistance, please refer to the contact information provided in the Quick Start Guide or visit the official Amkette website.