Product Overview
The Frigga M2H is a multi-use temperature and humidity data logger designed for monitoring and recording environmental conditions. It features an advanced internal sensor, large data memory, and multiple data export options, making it suitable for various applications such as monitoring during shipments, storage, or laboratory experiments.
Figure 1: Frigga M2H Data Logger device.
Key Features
- Multi-Use Functionality: Records both temperature and humidity data.
- High Accuracy: Temperature accuracy of ±0.5℃ (-20℃ to +40℃) and humidity accuracy of ±3% (20% to 80%RH).
- Large Memory: Stores up to 28,800 readings.
- USB Connectivity: Direct USB plug-in for automatic PDF and CSV report generation without additional software.
- Software Compatibility: Companion Frigga Data Software available for Windows & Mac OS for advanced settings and analysis.
- Long Battery Life: Equipped with a CR2450 battery for extended operation.
- IP65 Waterproof Grade: Provides protection against dust and water jets.
Components
Figure 2: Diagram showing the main components of the Frigga M2H Data Logger.
- USB Cover: Protects the USB connector.
- USB Connector: For connecting to a computer.
- LED Indicator: Displays device status (Alarm, OK).
- LCD Screen: Shows current readings and status.
- Stop Button: Used to stop data logging.
- Start Button: Used to initiate data logging.
- Bar Code Label: Contains product identification information.
Setup
1. Initial Device Preparation
The Frigga M2H data logger comes with a pre-installed CR2450 battery. No initial charging or complex setup is required to begin basic logging.
2. Software Installation (Optional for Advanced Configuration)
While the device can generate PDF and CSV reports directly upon USB connection, the complimentary Frigga Data Software offers advanced configuration options such as setting logging intervals, temperature units, time zones, and alarm ranges. The software is compatible with Windows and Mac OS.
- Download the Frigga Data Software from the official Frigga website or the Apple App Store (for Mac OS).
- Follow the on-screen instructions to install the software.
Figure 3: Frigga Data Center software interface for parameter customization and data analysis.
Operating Instructions
1. Starting Data Logging
To begin recording data, press and hold the START STATUS button for approximately 5 seconds until the blue LED blinks and the LCD screen displays "REC". Release the button within 40 seconds. The device will now be actively logging temperature and humidity data.
Figure 4: Pressing the START STATUS button to begin logging.
2. Stopping Data Logging
To stop recording data, press and hold the STOP button for approximately 5 seconds until the red LED blinks. Release the button within 40 seconds. The device will cease logging.
Figure 5: Pressing the STOP button to end logging.
3. Exporting Data Reports
There are multiple ways to export data from your Frigga M2H data logger:
- Direct USB Export: Plug the data logger into any computer's USB port. The device will automatically generate PDF and CSV reports, which can be accessed directly without installing any software.
- Frigga Data Software Export: Connect the logger to a computer with the Frigga Data Software installed. The software allows for detailed charting, statistical analysis, and export of data to Excel and PDF formats.
- Frigga Cloud Platform: All current and historical reports can be uploaded to and exported from the Frigga Cloud Platform for remote access and management.
Figure 6: The data logger automatically generates PDF and CSV reports when connected to a computer via USB.
Maintenance
Battery Replacement
The Frigga M2H data logger uses a CR2450 battery. When the battery indicator on the LCD screen shows low power, it is recommended to replace the battery to ensure continuous and accurate logging. To replace the battery, carefully open the battery compartment, typically located on the back or side of the device, and insert a new CR2450 battery, observing the correct polarity.
Figure 7: The Frigga M2H is designed for long-lasting battery life, indicating the CR2450 battery.
Cleaning and Storage
Clean the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Store the data logger in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
- Device Not Starting: Ensure the battery is correctly installed and has sufficient charge. Press and hold the START button firmly for the required duration.
- No Data Export via USB: Verify the USB connection is secure. Ensure the device has stopped logging before attempting to export. Try connecting to a different USB port or computer.
- Inaccurate Readings: Check for any physical damage to the sensor. Ensure the device is placed in an environment within its specified operating range.
- Software Issues: If experiencing problems with the Frigga Data Software, ensure it is the latest version. Refer to the software's help documentation or contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Frigga |
| Model Name | M2H |
| Measurement Range (Temperature) | -22°F ~ +158°F (-30°C ~ +70°C) |
| Measurement Range (Humidity) | 5%~95%RH |
| Accuracy Range (Temperature) | ±0.5℃ (-20℃~ +40℃); ±1℃ for other ranges |
| Accuracy Range (Humidity) | ±3% (20%~80%RH); ±5% for other ranges |
| Data Memory | 28,800 readings |
| Connectivity | USB |
| Power Source | 1 CR2450 battery (included) |
| Waterproof Grade | IP65 |
| Reusability | Reusable |
| Included Components | Frigga Temperature Humidity Data Logger M2H |
Warranty and Support
For any issues or inquiries regarding your Frigga M2H data logger, please contact Frigga customer support. 24/7 technician support is available via email. Refer to the product packaging or official Frigga website for specific warranty details and contact information.