Cooler Master MB600-KGNN-S00
Contents
Cooler Master MasterBox 600 ATX Mid-Tower Case User Manual
Model: MB600-KGNN-S00
1. Introduction
The Cooler Master MasterBox 600 is an ATX mid-tower case designed for high-performance PC builds. It features extensive compatibility for large components, including 420mm radiators and 410mm GPUs, and supports back-connected motherboards for streamlined cable management. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting.
2. Product Features
- Back-Connected Motherboard Support: Designed to accommodate back-connector motherboards (Asus, MSI, Gigabyte) for improved cable management and a cleaner interior aesthetic.
- Extensive Component Clearance: Supports GPUs up to 410mm, CPU coolers up to 170mm, and PSUs up to 170mm.
- Optimized Airflow: Features FineMesh front panel and pre-installed 140mm SickleFlow PWM fans for exceptional cooling performance.
- Radiator Compatibility: Ample room for up to a 420mm radiator for advanced liquid cooling solutions.
- Removable Storage Cage: Supports 2 x 3.5" HDDs and 6 x 2.5" SSDs for flexible storage configurations.
- USB 3.2 Gen Type-C: Integrated USB 3.2 Gen Type-C port on the I/O panel for high-speed connectivity.
3. Setup and Installation
3.1 Preparing the Case
Before beginning installation, ensure you have a clean, static-free workspace. Carefully remove the side panels. The tempered glass side panel is fragile; handle with care.

Image: Front view of the MasterBox 600 case, showcasing the three front RGB fans and the mesh front panel.
3.2 Motherboard Installation
Install your ITX, Micro ATX, ATX, or E-ATX motherboard. For back-connected motherboards, utilize the dedicated cutouts and cable routing channels behind the motherboard tray for optimal cable management.

Image: Internal view highlighting the areas for back-connected motherboard cables, demonstrating how space is freed up in the main compartment.
3.3 Component Clearance and Installation
The MasterBox 600 offers generous clearance for various components:
- GPU: Up to 410mm in length.
- CPU Cooler: Up to 170mm in height.
- PSU: Up to 170mm in length.

Image: Diagram illustrating the maximum dimensions for GPU (410mm), CPU cooler (170mm), and PSU (170mm) supported by the case.
3.4 Storage Device Installation
The case supports 2 x 3.5" HDDs and 6 x 2.5" SSDs. The removable storage cage facilitates easy installation and upgrades.

Image: Close-up view of the removable storage cage, showing its design for easy access and installation of drives.
3.5 Cooling System Setup
The MasterBox 600 comes with pre-installed 140mm SickleFlow PWM fans at the front and a 120mm CF120 ARGB fan at the rear. For liquid cooling, the case supports up to a 420mm radiator.

Image: Internal view of the case with components installed, demonstrating the spacious interior and potential for effective airflow.

Image: Two MasterBox 600 cases, one black and one white, showcasing the internal lighting and the capacity for large liquid cooling radiators.

Image: Visual representation of airflow paths within the MasterBox 600, highlighting the efficiency of the SickleFlow fans and FineMesh design.
3.6 Front I/O Panel Connections
Connect the front I/O panel cables (USB 3.2 Gen Type-C, USB 3.0, audio, power, reset) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Image: Close-up of the top I/O panel, showing the integrated USB 3.2 Gen Type-C port and other connectivity options.
4. Operating Instructions
Once all components are installed and connected, replace the side panels. Connect your peripherals and power cable. Press the power button on the front I/O panel to start your system. The pre-installed PWM fans will automatically adjust their speed based on system temperature, or can be controlled via motherboard software if connected to PWM headers.
5. Maintenance
5.1 Cleaning
Regular cleaning is essential for maintaining optimal airflow and component longevity. Use compressed air to remove dust from fans and mesh panels. Wipe exterior surfaces with a soft, damp cloth.
5.2 Dust Filters
The MasterBox 600 features FineMesh panels designed to filter dust. Periodically remove and clean these filters to prevent dust buildup and ensure unrestricted airflow.

Image: Close-up view of the FineMesh front panel, illustrating its fine texture designed for dust filtration and airflow.
6. Troubleshooting
- System not powering on:
- Check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables.
- Ensure the PSU switch is in the 'ON' position.
- Verify front panel power button connections to the motherboard.
- Fans not spinning or RGB not lighting up:
- Confirm fan power cables are securely connected to the motherboard or fan controller.
- Check RGB headers and connections.
- Ensure fan control software (if applicable) is correctly configured.
- Poor airflow/high temperatures:
- Clean dust filters and fans.
- Ensure fans are oriented correctly for optimal airflow (intake/exhaust).
- Verify no cables are obstructing airflow paths.
- Side panel difficult to close:
- Check for any cables or components obstructing the panel, especially with back-connected motherboards.
- Ensure all components are fully seated.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Cooler Master |
| Series | MasterBox 600 |
| Model Number | MB600-KGNN-S00 |
| Case Type | Mid Tower |
| Dimensions (LxWxH) | 18.66 x 9.05 x 18.93 inches |
| Weight | 17.41 pounds |
| Color | Black |
| Material | Tempered Glass, Stainless Steel, Plastic |
| Motherboard Support | ITX, Micro ATX, ATX (Back-connector), E-ATX (up to 12"x10.9") |
| GPU Clearance | Up to 410mm |
| CPU Cooler Height | Up to 170mm |
| PSU Length | Up to 170mm |
| Radiator Support | Front: 360mm, 420mm; Top: 360mm; Rear: 120mm |
| Pre-installed Fans | Front: 3x 140mm SickleFlow PWM; Rear: 1x 120mm CF120 ARGB |
| Drive Bays | 2x 3.5" HDD, 6x 2.5" SSD |
| Front I/O | USB 3.2 Gen Type-C x1, USB 3.0 x2, Audio Jack x1 |
8. Warranty and Support
For warranty information and technical support, please visit the official Cooler Master website or contact their customer service. Keep your proof of purchase for warranty claims.
Official Cooler Master Website: www.coolermaster.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.