1. Introduction
This instruction manual provides detailed guidance for the installation and use of the Montech VGM 2 Vertical GPU Mounting Kit. This kit is designed to vertically mount your graphics processing unit (GPU) within a PC chassis, enhancing both aesthetics and system airflow. It includes a high-speed PCIe 4.0 x16 riser cable for optimal performance.
2. Package Contents
- 1x Montech VGM 2 Vertical GPU Mounting Kit (Black)
- 1x PCIe 4.0 x16 Riser Cable (244mm)
- Mounting Screws and Hardware
- User Manual (this document)
3. Safety Information
Always ensure your PC is powered off and unplugged from the wall outlet before performing any installation or maintenance. Discharge any static electricity by touching a grounded metal object. Handle components with care to avoid damage. If you are unsure about any step, consult a professional or refer to additional resources.
4. Setup & Installation
The Montech VGM 2 Vertical GPU Mounting Kit is compatible with PC cases featuring 7 PCIe slots. Ensure your case has sufficient clearance for vertical GPU mounting.
4.1. Prepare the Mounting Kit
Begin by assembling the vertical GPU bracket. Attach the necessary support pieces using the provided screws. Do not overtighten screws, allowing for slight adjustments if needed during installation.
An overview of the Montech VGM 2 Vertical GPU Mounting Kit, showcasing its robust black metal frame and integrated PCIe 4.0 riser cable, designed for vertical GPU installation.
A front perspective of the mounting kit, highlighting the PCIe slot bracket and the flexible riser cable connection point.
A side view illustrating the bracket's profile and the secure attachment points for the graphics card.
The rear of the mounting kit, showing the ventilation cutouts and the thumbscrews for securing the bracket to the PC case.
An angled shot emphasizing the flexibility of the PCIe 4.0 riser cable and its connection to the main bracket.
Another perspective of the kit, providing a clear view of the GPU mounting area and the riser cable's path.
4.2. Install the Riser Cable
Carefully connect the PCIe 4.0 x16 riser cable to the designated slot on the mounting bracket. Ensure it is seated firmly.
4.3. Mount the Graphics Card
Attach your graphics card to the vertical mounting bracket. Secure it using the screws provided with the kit. Ensure the GPU is stable and properly aligned.
4.4. Integrate into PC Case
Insert the assembled vertical GPU mounting kit into your PC case. The kit is designed to fit into cases with 7 full-break PCIe slots. Secure the bracket to the case using the appropriate screws. Connect the riser cable's motherboard end to the primary PCIe x16 slot on your motherboard.
4.5. Installation Videos
This video demonstrates the step-by-step installation process for a vertical GPU mounting bracket, including assembly of the bracket components and securing it within a PC chassis. Note: The video shows a generic bracket, but the installation principles are similar.
A visual guide to installing a vertical GPU mount bracket. This video illustrates the process of attaching a graphics card to the bracket and integrating it into a PC case. While this video features a PCIe 5.0 bracket, the physical installation steps are largely transferable to the Montech VGM 2 PCIe 4.0 kit.
This video provides a general overview of a vertical GPU mounting solution, demonstrating its components and how it enhances the aesthetic and structural integrity of a PC build.
5. Operating Instructions
Once installed, the Montech VGM 2 Vertical GPU Mounting Kit operates passively. Ensure all connections are secure and the graphics card is properly seated. The PCIe 4.0 riser cable facilitates high-speed data transfer between your GPU and motherboard, maintaining optimal performance.
6. Maintenance
Regularly inspect the mounting kit and riser cable for any signs of wear or damage. Keep the area around the GPU and bracket free from dust to ensure proper airflow and cooling. Use compressed air to clean dust from fans and heatsinks as needed.
7. Troubleshooting
7.1. Graphics Card Not Detected
- Ensure the riser cable is fully seated in both the motherboard's PCIe slot and the GPU's slot.
- Verify that the GPU is correctly powered by its dedicated power cables.
- Check your motherboard's BIOS/UEFI settings to ensure the primary PCIe slot is configured correctly (e.g., set to PCIe Gen 4 if applicable, or Auto).
7.2. GPU Sagging
- Ensure all mounting screws securing the bracket to the case and the GPU to the bracket are tightened.
- Verify that the case's PCIe slots are fully compatible and provide adequate support.
8. Specifications
- Model Name: VGM2B
- PCIe Version: 4.0 x16
- Riser Cable Length: 244mm
- GPU Slot Support: 3 Slots
- Case Compatibility: 7 PCIe Slots (Full-Break)
- Color: Black
- Item Weight: 1.06 pounds
- Package Dimensions: 10.75 x 7.44 x 2.4 inches
- Material: Tempered Glass (Note: This refers to the case material, not the bracket itself, which is metal)
9. Warranty and Support
The Montech VGM 2 Vertical GPU Mounting Kit comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Montech website. For technical support or inquiries, please contact Montech customer service.
