1. Introduction
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine, Model FL-60W. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.
2. Safety Information
The Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine is a Class II laser product with an output power of 0.874mW. Adherence to safety guidelines is paramount to prevent injury.
- Laser Safety: Always wear appropriate laser safety glasses when operating the machine. Never look directly into the laser beam or at reflections.
- FDA Compliance: This device has FDA Accession Number: 2420799-000.
- Emergency Stop: Familiarize yourself with the location and function of the emergency stop button.
- Ventilation: Ensure adequate ventilation in the work area to dissipate fumes generated during marking.
- Material Safety: Only mark materials approved for laser processing. Certain materials can produce hazardous fumes or ignite.
- Authorized Personnel: Only trained and authorized personnel should operate this equipment.
3. Product Overview
The Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine is designed for high-precision engraving and cutting on a wide range of materials. It features a JPT MOPA M7 laser source, a high-speed galvo scanning system, and compatibility with EzCad Lite and LightBurn software.
Figure 3.1: Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine with D80 rotary axis and examples of marked items.
3.1 Main Components
Figure 3.2: Labeled components of the laser marking machine (Front and Back Views).
- Laser Source: JPT MOPA M7 (YDFLP-E-60-M7-M-R) 60W fiber laser.
- Galvo Head: SINO SG7110 Galvo Head for precise and fast scanning.
- Controller Board: BJJCZ original control board.
- Working Lenses: Includes 175x175mm and 300x300mm working lenses.
- Rotary Axis: D80 Rotary axis for cylindrical object marking.
- Emergency Stop: Red button for immediate power cut-off.
Figure 3.3: SINO-GALVO SG7110 Galvo Head, providing high accuracy and marking speed up to 5000mm/s.
Figure 3.4: JPT YDFLP-E-60-M7-M-R Laser Source Module.
Figure 3.5: D80 Rotary Axis for marking cylindrical objects.
4. Specifications
Key technical specifications for the Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine:
Figure 4.1: Detailed specifications for the 60W MOPA Fiber Laser Marking Machine.
| Feature | Specification |
|---|---|
| Laser Source Model | JPT MOPA M7 (YDFLP-E-60-M7-M-R) |
| Output Power | 60W (0.874mW, Class II) |
| Maximum Pulse Energy | 2.0mJ |
| Repetition Rate Frequency | 1-4000kHz |
| Pulse Duration | 2-500ns |
| Electrical-Optical Conversion Rate | Up to 70% |
| Marking Speed | Up to 7m/s (7000mm/s) |
| Re-position Precision | 0.002mm |
| Working Area (Lenses) | 175x175mm, 300x300mm |
| Controller Board | SZLI-B-V4 (BJJCZ) |
| Software | EzCad Lite (Compatible with LightBurn) |
| Rotary Holder | D80 Rotary axis (Included) |
| Galvo Brand & Model | SINO SG7110 K9 |
| Red Light Preview | Yes |
| Double Red Dot Position | Yes |
| Color Marking | Yes (on Stainless Steel) |
| Supply DC Voltage (VDC) | 24V |
| Central Emission Wavelength | 1064nm |
| Supported Windows System | Windows 7, Windows 10, Windows 11 |
| Product Dimensions | 30.31 x 18.5 x 22.83 inches |
| Item Weight | 138.6 pounds |
5. Setup
Follow these steps to set up your laser marking machine:
- Unpacking: Carefully remove all components from the packaging. Inspect for any shipping damage.
- Placement: Place the machine on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
- Power Connection: Connect the power cable to the machine and then to a grounded electrical outlet.
- USB Connection: Connect the machine to your computer using the provided USB cable.
- Software Installation: Install the EzCad Lite software on your computer. Drivers may be included with the software or require separate installation.
- Lens Installation: Select the appropriate working lens (175x175mm or 300x300mm) and securely attach it to the galvo head.
- Rotary Axis (Optional): If using the D80 rotary axis, connect it to the designated port on the machine.
6. Operation
Operating the laser marking machine involves software control and material handling.
6.1 Software Overview
The machine primarily uses EzCad Lite software. It is also compatible with LightBurn for design and control.
Figure 6.1: EzCad Lite software interface, compatible with LightBurn for various file types.
6.2 Basic Marking Procedure
- Power On: Turn on the machine using the main power switch.
- Software Launch: Open EzCad Lite or LightBurn software on your computer.
- Design Creation/Import: Create your design or import an existing file (PLT, DXF, AI, SVG, JPG, PNG, etc.).
- Material Placement: Place the material to be marked on the work platform.
- Focus Adjustment: Use the focus wheel to adjust the working distance until the red light pointers converge, indicating proper focus.
- Preview: Use the red light preview function to verify the marking area and position on your material.
- Parameter Settings: Adjust laser parameters (power, speed, frequency, pulse duration) according to the material and desired effect. Refer to material testing for optimal settings.
- Start Marking: Initiate the marking process from the software. Monitor the process closely.
- Power Off: Once marking is complete, turn off the machine.
6.3 Material Compatibility and Effects
The machine is suitable for marking various materials, including:
- Metals: Carbon Steel, Aluminum, Stainless Steel, Brass, Copper, Gold, Silver, Ferrous metals, etc.
- Non-metals: Nylon, light button, ABS, PVC, PES, and some plastics.
Figure 6.2: Examples of Stainless Steel Color Marking capabilities.
Figure 6.3: Wide range of engraving examples on different materials.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your laser marking machine.
- Cleaning Lenses: Periodically clean the working lenses and galvo mirrors with a specialized lens cleaning solution and lint-free wipes. Avoid touching optical surfaces with bare hands.
- Dust Removal: Keep the machine free from dust and debris. Use compressed air to clean cooling vents and internal components.
- Cable Inspection: Regularly inspect all cables for wear, damage, or loose connections.
- Software Updates: Keep your EzCad Lite or LightBurn software updated to the latest version.
- Environmental Control: Operate the machine in a clean, dry environment with stable temperature and humidity.
8. Troubleshooting
This section provides solutions to common issues you might encounter.
- No Laser Output:
- Check if the machine is powered on and connected correctly.
- Ensure the emergency stop button is not engaged.
- Verify laser parameters in the software.
- Check for any error messages in the software.
- Poor Marking Quality:
- Adjust focus precisely.
- Clean the working lens and galvo mirrors.
- Optimize laser parameters (power, speed, frequency, pulse duration) for the specific material.
- Ensure the material is flat and stable on the work platform.
- Software Not Connecting:
- Verify USB cable connection.
- Check if the correct drivers are installed.
- Restart the software and the machine.
- Try a different USB port or cable.
- Rotary Axis Not Functioning:
- Ensure the rotary axis is securely connected to its port.
- Verify that the rotary axis function is enabled and configured correctly in the software.
9. Warranty and Support
For any technical assistance or support regarding your Ovsuqu JPT MOPA 60W Fiber Laser Marking Machine, please contact Ovsuqu customer service. Good support is available for machine operation and troubleshooting.
