AMP Research PowerStep Vision 96242-01A Instruction Manual

1. Introduction

The AMP Research PowerStep Vision is an advanced electric running board system designed to provide convenient and safe access to your truck. This system features automatic deployment and retraction, integrated LED lighting, and smartphone app control for enhanced functionality. Constructed from rust-proof aluminum, these steps are built for durability and performance in various conditions.

Fitment: This manual applies to the PowerStep Vision model 96242-01A, compatible with 2022-2024 Ford F-250/350/450 SuperCrew Cab (specifically 2022 Sync 4 models only).

Figure 1: Full view of the AMP Research PowerStep Vision electric running board.

2. Setup and Installation

The PowerStep Vision system is designed for easy installation with plug-n-play technology. All necessary wiring and hardware are included in the package. For detailed, step-by-step instructions, please refer to the comprehensive installation guide provided with your product. A video guide is also available to assist with the installation process.

2.1 Package Contents

• Driver Side PowerStep
• Passenger Side PowerStep
• Hardware Kit
• Installation Guide

2.2 Pre-Installation Notes

• Ensure your vehicle is parked on a level surface and the engine is off.
• Gather all necessary tools as specified in the installation guide.
• Verify all components listed in the package contents are present before beginning.

3. Operating Instructions

The PowerStep Vision system offers seamless operation with automatic deployment and retraction, intelligent lighting, and smartphone control.

3.1 Automatic Deployment and Retraction

• Deployment: The steps automatically deploy when a vehicle door is opened.
• Retraction: The steps automatically retract when all vehicle doors are closed.
• Safety Feature: The system includes anti-pinch technology, which cuts power to the motors if resistance is detected during deployment or retraction, preventing injury or damage.

3.2 Integrated LED Lighting

• The full-length LED Glow Lighting system is integrated into the step profile.
• When the step is activated (deployed), the lights project at full brightness to illuminate the step and the ground below, aiding visibility in low-light conditions.
• When the steps retract, the lighting dims to provide a color-customizable accent light feature, enhancing the vehicle's appearance.

Figure 2: Close-up view of the PowerStep Vision deployed, showing the integrated LED lighting illuminating the step surface.

3.3 Smartphone App Control (AMP Research SmartSeries App)

The AMP Research SmartSeries app (available for iOS and Android devices) provides total control over the step and LED lighting functions.

• Manual Step Override: Deploy or retract the steps manually via the app. This is useful for cleaning the vehicle or when off-roading to prevent accidental deployment.
• Lighting Control: Adjust lighting settings, including color customization and brightness, directly from your smartphone.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your PowerStep Vision system.

• Cleaning: Periodically clean the steps and linkage mechanisms to remove dirt, mud, and debris. Use mild soap and water, avoiding harsh chemicals that could damage the finish or electrical components.
• Lubrication: Inspect the pivot points and moving parts of the linkage. Apply a silicone-based lubricant as needed to ensure smooth operation.
• Electrical Connections: Check all electrical connections for corrosion or looseness. Ensure they are securely fastened and free from moisture.
• General Inspection: Regularly inspect the steps for any signs of damage, wear, or loose fasteners. Address any issues promptly to prevent further complications.

5. Troubleshooting

If you encounter issues with your PowerStep Vision, refer to the following common troubleshooting tips:

• Steps Not Deploying/Retracting:
  • Check all door sensors to ensure they are functioning correctly and not obstructed.
  • Verify all electrical connections are secure and free from corrosion.
  • Ensure the vehicle's battery has sufficient charge.
  • If using the smartphone app, check the app's status and ensure no override is active.
• LED Lights Not Working:
  • Inspect the wiring to the LED lights for any damage or loose connections.
  • Check the app settings for lighting control.
• Steps Deploying Incorrectly or Partially:
  • Clear any obstructions from the step's path.
  • Inspect the linkage for debris or damage that might impede movement.
  • The anti-pinch feature may activate if there is an obstruction; remove the obstruction and re-test.
• Installation Issues (e.g., missing parts, wiring errors):
  • Carefully re-check the installation guide and wiring diagrams.
  • If parts are missing or damaged upon receipt, contact AMP Research customer service immediately.

6. Specifications

7. Warranty and Support

For detailed information regarding the product warranty, including coverage, terms, and conditions, please refer to the official warranty documentation provided by AMP Research with your purchase. This information is typically found in the product packaging or on the manufacturer's website.

For technical support, troubleshooting assistance beyond what is covered in this manual, or to inquire about replacement parts, please contact AMP Research customer service directly. Their contact information can usually be found on their official website or in the product documentation.