1. Introduction
This manual provides essential information for the safe and efficient operation of your BITMAIN Antminer S19 XP ASIC Miner. Please read these instructions carefully before installation and use to ensure optimal performance and longevity of the device.
2. Safety Information
WARNING: This device operates at high voltage and consumes significant power. Improper installation or use can result in electric shock, fire, or damage to the equipment. Always follow safety guidelines.
- Power Supply: The Antminer S19 XP requires a 220-240V AC input voltage. Using an incorrect voltage may cause severe damage to the miner.
- Power Cord: The power cord is NOT INCLUDED in the original package. Ensure you use a compatible power cord rated for the required voltage and current.
- Ventilation: Ensure adequate airflow around the miner to prevent overheating. Do not obstruct the air inlets or outlets.
- Environment: Operate the miner within specified environmental conditions (temperature, humidity) to maintain performance and prevent damage.
- Electrical Safety: Do not open the miner casing while it is powered on. Disconnect power before performing any maintenance or inspection.
3. Package Contents
Upon receiving your BITMAIN Antminer S19 XP, please verify that the following items are included:
- BITMAIN Antminer S19 XP ASIC Miner Unit
- Product User Manual (this document)
Note: The power cord is not included and must be sourced separately.
4. Product Overview
The BITMAIN Antminer S19 XP is a high-performance ASIC (Application-Specific Integrated Circuit) miner designed for SHA256 algorithm-based cryptocurrencies such as Bitcoin (BTC), Bitcoin Cash (BCH), and Bitcoin SV (BSV). It features an air-cooling system for efficient heat dissipation.
Image 1: Front view of the BITMAIN Antminer S19 XP ASIC Miner.
Image 2: Angled view of the Antminer S19 XP, highlighting the 220V AC power requirement.
Image 3: Rear view of the Antminer S19 XP, displaying the cooling fans and power input ports.
5. Setup Instructions
Follow these steps to set up your Antminer S19 XP:
- Placement: Choose a location with good ventilation and stable temperature. Ensure the miner is placed on a flat, stable surface.
- Power Connection: Connect the appropriate 220-240V AC power cord (not included) to the miner's power input ports. Ensure all connections are secure.
- Network Connection: Connect an Ethernet cable (10/100M) from your network router or switch to the Ethernet port on the miner.
- Power On: Once all connections are secure, power on the miner. The device will initiate its startup sequence.
- Initial Configuration: Access the miner's web interface via a web browser on a computer connected to the same network. Refer to the miner's network settings or use an IP scanner to find its IP address. Log in using default credentials (usually provided by BITMAIN or found in their general documentation) and configure your mining pool settings.
6. Operation Guide
After successful setup and configuration, your Antminer S19 XP will begin mining. You can monitor its performance through the web interface.
- Monitoring Hashrate: The web interface displays the current hashrate (e.g., 151 TH/S), which indicates the processing power dedicated to mining.
- Power Efficiency: The miner operates at an efficiency of approximately 21.5 J/TH, indicating its energy consumption per unit of hashing power.
- Temperature Monitoring: Regularly check the operating temperature of the miner to ensure it remains within safe limits (32~113°F or 0~45°C).
- Supported Algorithms: The S19 XP is designed for the SHA256 algorithm, supporting cryptocurrencies like BTC, BCH, and BSV.
7. Maintenance
Regular maintenance is crucial for the longevity and stable operation of your Antminer S19 XP.
- Dust Removal: Periodically clean dust from the fans and heatsinks to ensure efficient cooling. Use compressed air or a soft brush.
- Environmental Control: Maintain the operating environment within the recommended temperature (32~113°F) and humidity (10~90% non-condensing) ranges.
- Firmware Updates: Check the official BITMAIN website for any available firmware updates. Apply updates as recommended to improve performance, stability, or security.
- Power Supply Check: Ensure the power supply unit and cables are free from damage and securely connected.
8. Troubleshooting
If you encounter issues with your Antminer S19 XP, consider the following common troubleshooting steps:
- Miner Not Powering On: Verify the power cord is correctly connected and the power outlet is functional. Ensure the input voltage is 220-240V AC.
- No Network Connection: Check the Ethernet cable connection. Ensure your router is working and the miner's IP address is correctly configured.
- Low Hashrate: This could be due to high operating temperatures, network issues, or incorrect mining pool configuration. Check the miner's status in the web interface.
- Overheating: Ensure proper ventilation. Clean any dust buildup on fans and heatsinks. Verify ambient temperature is within specifications.
- Unresponsive Web Interface: Try restarting the miner. If the issue persists, you may need to reset the miner to factory settings (refer to BITMAIN's official documentation for specific procedures).
9. Specifications
| Feature | Specification |
|---|---|
| Model | S19 XP |
| Algorithm | Cryptocurrency | SHA256 | BTC/BCH/BSV |
| Hashrate | 151 TH/S ± 3% |
| Power on wall @77°F(25°C) | 3247 W ± 5% |
| Power efficiency on wall @77°F(25°C) | 21.5 J/TH ± 5% |
| Power supply AC Input voltage | 200~240 V |
| Power supply AC Input Frequency Range | 47~63 Hz |
| Power supply AC Input current | 20 Amp |
| Networking connection mode | Ethernet 10/100M |
| Miner Size (Length*Width*Height, w/o package) | 15.75 x 7.68 x 11.42 inches |
| Miner Size (Length*Width*Height, with package) | 22.45 x 12.45 x 16.93 inches |
| Net weight | 33.96 lbs |
| Gross weight | 37.92 lbs |
| Operation temperature | 32~113°F (0~45°C) |
| Storage temperature | -4~158 °F (-20~70°C) |
| Operation humidity (non-condensing) | 10~90% RH |
| Operation altitude | ≤2000 m |
10. Warranty and Support
Warranty Information: Brand New BITMAIN Antminer units come with warranty coverage provided directly by BITMAIN. We are not responsible for the warranty; therefore, customers are required to proactively contact BITMAIN's official website, where dedicated personnel will assist you with any warranty claims or support needs.
Technical Support: For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Antminer S19 XP, please refer to the official BITMAIN support channels and resources available on their website.
11. Related Videos
No official product videos directly related to the BITMAIN Antminer S19 XP were found in the provided media. Please refer to the manufacturer's official website for any available video resources.
