WiFi Extender User Manual

1. Introduction

Thank you for choosing the nonser M-97C WiFi Extender. This device is designed to expand your existing wireless network coverage, eliminate dead zones, and provide a stable, high-speed internet connection throughout your home or office. With dual-band support (2.4GHz and 5GHz) and multiple operating modes, it offers versatile solutions for various networking needs.

Figure 1: Front view of the nonser M-97C WiFi Extender.

2. Product Features

• Extensive Coverage: Extends WiFi signal up to 10,000 sq. ft., effectively eliminating dead zones.
• High-Speed Dual-Band: Supports 1200Mbps transmission with both 2.4GHz and 5GHz bands for fast and stable connectivity.
• Multiple Work Modes: Functions as a WiFi Repeater, Access Point (AP), and includes an Ethernet port for wired connections.
• Enhanced Security: Utilizes WPA/WPA2 security protocols to protect your network from unauthorized access.
• Wide Compatibility: Seamlessly integrates with various routers and devices, supporting up to 55 connected devices.
• Easy Setup: Designed for hassle-free installation and reliable performance.

Figure 2: Illustration of the WiFi extender's wide coverage capability.

Figure 3: Dual-band wall penetration capability.

3. Package Contents

The product package should contain the following items:

• WiFi booster (M-97C WiFi Extender)
• User Manual (this document)

4. Setup

The nonser M-97C WiFi Extender offers two primary setup methods: WPS (Wi-Fi Protected Setup) and Web Browser Setup.

4.1. Repeater Mode Setup (WPS Method)

This is the quickest way to extend your existing WiFi network.

1. Power On: Plug the WiFi Extender into an electrical outlet near your main router. Wait for the power indicator light to turn on.
2. WPS on Extender: Press the WPS/RST button on the WiFi Extender for 1-2 seconds. The WPS indicator light should start blinking.
3. WPS on Router: Within 2 minutes, press the WPS button on your main wireless router.
4. Connection: The extender will automatically connect to your router. Once connected, the signal indicator lights on the extender will become solid, indicating a successful connection.
5. Relocate: Unplug the extender and move it to a location halfway between your router and the WiFi dead zone. Ensure the signal indicator lights remain solid after plugging it in, indicating good signal strength.

4.2. Repeater Mode Setup (Web Browser Method)

Use this method if your router does not have a WPS button or if the WPS method fails.

1. Power On: Plug the WiFi Extender into an electrical outlet near your main router.
2. Connect to Extender's WiFi: On your computer or smartphone, connect to the WiFi network named "nonser_EXT" or similar (without a password).
3. Access Setup Page: Open a web browser (e.g., Chrome, Firefox) and enter the default IP address (usually 192.168.10.1 or check the label on the device) or the setup URL provided in the quick start guide.
4. Login: Enter the default username and password (usually "admin" for both, or as specified in the quick start guide).
5. Select Repeater Mode: Follow the on-screen instructions to select "Repeater Mode". The extender will scan for available WiFi networks.
6. Select Network: Choose your main WiFi network (SSID) from the list and enter its password.
7. Apply Settings: Confirm the settings. The extender will restart.
8. Verify: Once restarted, the extender's new WiFi network (e.g., YourNetworkName_EXT) will be available. Connect to it using your main network's password.
9. Relocate: Unplug the extender and move it to an optimal location.

4.3. AP Mode Setup (Access Point)

In AP mode, the extender converts a wired internet connection into a wireless access point.

1. Power On: Plug the WiFi Extender into an electrical outlet.
2. Connect Ethernet Cable: Connect an Ethernet cable from your router (or modem) to the Ethernet port on the WiFi Extender.
3. Connect to Extender's WiFi: On your computer or smartphone, connect to the WiFi network named "nonser_EXT" or similar (without a password).
4. Access Setup Page: Open a web browser and enter the default IP address or setup URL.
5. Login: Enter the default username and password.
6. Select AP Mode: Follow the on-screen instructions to select "AP Mode".
7. Configure WiFi Settings: Set a new SSID (network name) and password for your new wireless network.
8. Apply Settings: Confirm the settings. The extender will restart and function as an access point.

Figure 4: Two working modes application: Repeater Mode and AP Mode.

5. Operating Modes

5.1. Repeater Mode

In Repeater Mode, the device extends the range of your existing wireless network. It receives the wireless signal from your main router and re-transmits it, effectively expanding coverage to areas with weak or no signal. This mode is ideal for large homes or offices with dead zones.

5.2. AP Mode (Access Point)

In AP Mode, the device connects to a wired network (e.g., from a modem or router via Ethernet cable) and broadcasts a new wireless network. This is useful for adding wireless capability to a wired-only network or creating a new WiFi hotspot in a specific area.

6. Troubleshooting

6.1. No Internet Access After Setup

• Check Main Router: Ensure your main router has an active internet connection.
• Extender Placement: Relocate the extender closer to your main router. The signal indicator lights should show a strong connection.
• Re-configure: Try setting up the extender again using the web browser method to ensure all settings are correct.

6.2. Slow Speed or Frequent Disconnections

• Optimal Placement: Ensure the extender is placed in an optimal location, roughly halfway between your router and the desired coverage area, avoiding physical obstructions like thick walls or large metal objects.
• Interference: Keep the extender away from devices that emit strong electromagnetic interference (e.g., microwaves, cordless phones).
• Band Selection: For higher speeds, try connecting devices to the 5GHz band if supported.

6.3. Cannot Access Web Management Page

• Correct IP Address: Ensure you are using the correct IP address (e.g., 192.168.10.1) or URL.
• Connected to Extender: Verify that your device is connected to the extender's WiFi network (e.g., "nonser_EXT") and not your main router's network.
• Reset: If issues persist, perform a factory reset by pressing and holding the WPS/RST button for 5-8 seconds until all lights flash. Then, attempt setup again.

7. Specifications

Figure 5: Back view of the WiFi Extender with model identification.

8. Safety Information

• Do not expose the device to water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Use only the power adapter provided or recommended by the manufacturer.
• Ensure proper ventilation around the device; do not block ventilation openings.
• Keep the device out of reach of children.

9. Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners.
• Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and security.
• Restart: If the device experiences performance issues, try restarting it by unplugging it from the power outlet for 10 seconds and then plugging it back in.

10. Warranty and Support

The nonser M-97C WiFi Extender comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official nonser website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or any inquiries regarding your product, please contact nonser customer support through their official website or the contact information provided in your product packaging.