MekedeTech Android Car Radio Stereo GPS Navigation User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MekedeTech Android Car Radio Stereo GPS Navigation system. Please read this manual thoroughly before installation and use to ensure proper function and to maximize your experience.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

Figure 2.1: Included accessories. This image displays the main head unit, power cable, external microphone, GPS antenna, reversing camera cable, RCA cable, and USB cable, which are all part of the standard package.

• Main Head Unit (9-inch Touch Screen)
• Power Cable Harness
• External Microphone
• GPS Antenna
• Reversing Camera Cable
• RCA Cable Set
• USB Cables (2x)
• Installation Dash Kit (Pre-fitted for Honda Insight 2009-2014)

3. Setup and Installation

This Android head unit is designed for a plug-and-play installation in Honda Insight models from 2009 to 2014. Professional installation is recommended, but the following steps provide a general overview.

3.1 Pre-Installation Check

• Ensure the vehicle's ignition is off and the battery is disconnected before starting installation.
• Confirm all included accessories match the package contents list.

3.2 Installation Steps

1. Carefully remove the original car radio and dashboard trim. Refer to your vehicle's service manual for specific instructions on trim removal.
2. Connect the main power cable harness from the new head unit to the vehicle's wiring harness. Ensure all connections are secure.
3. Connect the GPS antenna and position it in a location with a clear view of the sky (e.g., on the dashboard).
4. Connect the external microphone for hands-free calling. Route the cable discreetly to a suitable location near the driver.
5. If installing a reversing camera, connect its cable to the designated input on the head unit and route it to the rear of the vehicle.
6. Connect any additional RCA or USB cables as needed for external devices.
7. Mount the new head unit into the dashboard opening. Ensure it fits securely within the provided dash kit.
8. Reconnect the vehicle's battery and turn on the ignition to test the unit.
9. Once tested, reassemble the dashboard trim.

Figure 3.1: Before and After Installation. The top image shows the new Android head unit installed, while the bottom left shows the original car radio, and the bottom right shows the new unit again for comparison.

3.3 Cooling Fan Setup

The unit includes a cooling fan to manage internal temperatures. Follow these steps to ensure proper operation:

1. Connect the fan: Ensure the cooling fan cable is securely connected to the designated port on the back of the head unit.
2. Access Settings: On the head unit, navigate to Settings > Device > Sound.
3. Enable AMP ON: Within the settings, locate and enable the "AMP ON" option.
4. The cooling fan will activate automatically when needed to maintain optimal operating temperature.

Figure 3.2: Cooling Fan Integration and Setup. This image illustrates the internal cooling fan design, its effectiveness in temperature regulation, and the three-step process to enable it via the device settings.

4. Operating Instructions

Your MekedeTech head unit runs on Android 13 OS, offering a range of features for an enhanced in-car experience.

4.1 Wireless CarPlay and Android Auto

The unit features built-in wireless CarPlay (for iOS devices) and wired Android Auto (for Android devices), allowing seamless integration of your smartphone's functions.

4.1.1 Wireless CarPlay (iOS System)

1. Enable Bluetooth on your iPhone.
2. On the head unit, open the "Car Link" application.
3. Connect your iPhone to the head unit via Bluetooth.
4. Wait for the connection to establish. CarPlay will launch automatically. (CarPlay can also be connected via USB cable).

4.1.2 Wired Android Auto (Android System)

1. Enable Bluetooth on your Android phone.
2. On the head unit, open the "Car Link" application.
3. Connect your Android phone to the head unit via Bluetooth.
4. Wait for the connection to establish. Android Auto will launch automatically. (Android Auto can also be connected via USB cable).

Figure 4.1: CarPlay and Android Auto Interface. This image shows the user interface for both CarPlay (iOS) and Android Auto, along with the connection steps for each system, highlighting the wireless connectivity.

4.2 GPS Navigation

The unit includes a built-in global positioning system (GPS) with support for various map applications. It provides real-time traffic conditions and accurate positioning.

• Supported satellite systems: GPS, BDS, GLONASS.
• Compatible map applications include Navitel, iGO, Yandex, and Google Maps.
• Ensure the GPS antenna is properly installed for optimal signal reception.

4.3 Split Screen Functionality

The head unit supports displaying two applications simultaneously on the screen, enhancing convenience and multitasking.

• Example uses: Displaying FM/AM Radio with a map, or playing music while navigating.
• To activate split screen, open one application, then long-press the recent apps button or drag another compatible app to the side of the screen.

Figure 4.2: Split Screen and GPS Navigation. This image demonstrates the ability to run two applications side-by-side, such as radio and maps, or music and maps. It also highlights the GPS navigation capabilities with supported map types.

4.4 Other Features

• Bluetooth 5.0: Supports hands-free calls and Bluetooth music streaming.
• Steering Wheel Control: Retains original steering wheel control functions for easy song switching, channel adjustment, and volume control.
• FM Radio: Built-in FM radio tuner.
• Rear USB Ports: Two rear USB input ports for media playback or device charging.
• Backup Camera Input: Supports connection to a rear view camera for parking assistance.
• Wi-Fi: Built-in Wi-Fi module for internet access via hotspot.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your head unit.

• Cleaning: Use a soft, dry cloth to clean the screen and exterior. For stubborn smudges, a slightly damp cloth with a mild, non-abrasive cleaner can be used, then wipe dry immediately. Avoid harsh chemicals.
• Software Updates: Periodically check for available software updates through the unit's settings or the manufacturer's website. Updates can improve performance, add features, and fix bugs.
• Temperature: Avoid exposing the unit to extreme temperatures. The built-in cooling fan helps regulate internal temperature during operation.

6. Troubleshooting

If you encounter issues with your head unit, refer to the following common problems and solutions.

If these solutions do not resolve the issue, please contact MekedeTech customer support for further assistance.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

This MekedeTech product comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact MekedeTech customer support. Refer to your purchase documentation or the seller's contact information for the most direct support channels.

Manufacturer: Shenzhen Mekede Technology Co.,Ltd