Introduction
Thank you for choosing the Combuh TL070 Rechargeable Motion Sensor Ceiling Light. This instruction manual provides essential information for the safe and efficient use of your new lighting product. Designed for versatility and convenience, this battery-operated LED light features motion sensing, adjustable color temperatures, dimming capabilities, and multiple installation options, making it ideal for various indoor spaces.
Setup and Installation
The Combuh TL070 offers flexible, wire-free installation methods to suit your needs. Choose between adhesive mounting, screw-mount, or direct magnetic attachment.
Package Contents:
- 1 x Rechargeable Motion Sensor Ceiling Light (Diameter: 7.48 inch/19 cm)
- 1 x Remote Control
- 1 x USB-C Cable
- 1 x Iron Sheet (for magnetic mounting)
- 1 x Double-Sided Tapes (for adhesive mounting)
- 2 x Screws
- 2 x Rubber Caps
- 1 x Instruction Manual
Installation Methods:
- 3M Adhesive Mounting: For smooth, clean surfaces, attach the provided iron sheet using the double-sided adhesive tape. Ensure the surface is dry and free of dust. Once the iron sheet is securely in place, the light can be magnetically attached. This method requires no drilling and is renter-friendly.
- Screw-Mount: For textured or uneven surfaces, use the included screws and rubber caps to securely fasten the iron sheet to the desired location. Then, magnetically attach the light to the installed iron sheet.
- Direct Magnetic Attachment: If you have a metal surface (e.g., refrigerator, caravan ceiling), the light can snap instantly onto it without needing the iron sheet.
The magnetic design allows for easy detachment of the light for charging or cleaning.


Installation Video:
Operation
The Combuh TL070 offers multiple operating modes and customizable light settings for optimal user experience.
Powering On/Off and Modes:
- Sensor Mode (AUTO1/AUTO2): The light automatically turns on when motion is detected within 13ft (4m) and turns off after 20 seconds of inactivity.
- AUTO1 (Darkness-Only Activation): The sensor activates only in dark conditions, conserving energy.
- AUTO2 (24/7 Activation): The sensor activates regardless of ambient light, providing illumination anytime motion is detected.
- ON Mode: Provides continuous light. Can be manually turned on/off or set with a remote auto-off timer.
Light Settings:
- 3 Color Options: Adjust between warm, neutral, and cool color temperatures to suit your preference or mood.
- Stepless Dimming (5%-100%): Adjust the brightness level from 5% to 100% for various tasks, from relaxing to focused work.
- Remote Control: All light settings (color temperature, dimming, and auto-off timer) can be adjusted conveniently via the included remote control. Auto-off timer options include 15, 30, and 60 minutes.


Operation Video:
Maintenance
Charging:
The light features a built-in 6000mAh rechargeable battery. To charge, simply detach the light from its magnetic mount and connect the included USB-C cable to the charging port. A full charge takes approximately 4-5 hours. The battery provides up to 13 hours of continuous light in ON Mode or up to 85 days in night sensor mode, depending on brightness and usage frequency.

Cleaning:
To clean the light, detach it from its mounting. Wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
Troubleshooting
If you encounter any issues with your Combuh TL070 light, please consider the following common solutions:
- Light not turning on: Ensure the battery is charged. Check if the light is in the correct operating mode (ON, AUTO1, or AUTO2).
- Motion sensor not working: Verify the light is in AUTO1 or AUTO2 mode. Ensure there are no obstructions blocking the sensor. Test in different ambient light conditions if in AUTO1 mode.
- Remote control not responding: Check the remote control's battery. Ensure there is a clear line of sight between the remote and the light.
- Light flickering or dim: Recharge the battery. Adjust the brightness settings using the remote control.
If problems persist, please refer to the support section for further assistance.
Specifications
| Model Name | ceiling light |
| Item Model Number | TL070 |
| Brand | Combuh |
| Product Dimensions | 7.48"L x 7.48"W x 0.59"H |
| Item Weight | 14.4 ounces (0.41 Kilograms) |
| Power Source | Battery Powered |
| Battery Capacity | 6000mAh (Built-in) |
| Special Features | Color Changing, Dimmable, Magnetic Mount, Motion Sensor |
| Control Method | Remote, Push Button |
| Light Source Type | LED |
| Voltage | 5 Volts |
| Light Color | Warm White/Natural White/Cool White (3CCT) |
| Wattage | 5 watts |
| Brightness | 250 Lumen (Max 300 Lumens) |
| Water Resistance Level | Waterproof (IP44) |
| Installation Type | Semi Flush Mount |
| Recommended Uses | Indoor lighting, corridors, basements, balconies, closets, kitchens, bathrooms, staircases, work rooms, showers |

Warranty
The Combuh TL070 Rechargeable Motion Sensor Ceiling Light comes with a 2-Year Warranty. Please retain your proof of purchase for warranty claims.
Support
For any questions, technical assistance, or warranty inquiries, please contact Combuh customer support through the retailer's platform or visit the official Combuh website for contact information.