onerbl 5V 1A AC-DC Adapter + USB C Charging Cable User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your onerbl 5V 1A AC-DC Adapter and USB C Charging Cable. This power supply is designed to operate your device or charge its battery from standard electrical power outlets. It converts AC power into the DC power required by your compatible devices.

The adapter is compatible with devices such as the ALTSON 60 LED Portable Selfie Light Video with a 2200mAh Battery, requiring a USB Type C cable and a 5VDC 1000mA power supply. It features a wide input voltage range (AC 100-240V, 50/61Hz) for worldwide use and includes built-in over voltage and over heat protection for enhanced safety and reliability.

2. Setup Instructions

Follow these steps to properly set up your onerbl AC-DC Adapter:

1. Unpack the Adapter: Carefully remove the AC-DC adapter and USB C charging cable from its packaging. Inspect for any visible damage.
2. Connect the USB C Cable: Insert the USB Type C end of the charging cable into the designated charging port of your compatible device (e.g., ALTSON 60 LED Portable Selfie Light). Ensure a firm connection.
3. Connect to Power Outlet: Plug the AC-DC adapter into a standard wall power outlet (AC 100-240V). The adapter is designed for automatic voltage detection.
4. Verify Connection: Confirm that your device indicates it is receiving power or charging.

Image: The onerbl 5V 1A AC-DC Adapter with its USB C cable, ready for connection to a compatible device. This image illustrates the adapter and cable components.

3. Operating Your Adapter

Once connected, the adapter will automatically begin supplying power or charging your device. No further user interaction is typically required for basic operation.

• Power Input: The adapter accepts a wide range of AC input voltages from 100V to 240V at 50/61Hz, making it suitable for use in various regions globally.
• Power Output: It provides a stable 5VDC output at 1000mA (1A), which is suitable for devices requiring this specific power specification.
• Charging Indication: Refer to your device's user manual for information on how it indicates charging status.

4. Care and Maintenance

To ensure the longevity and safe operation of your adapter, please observe the following:

• Cleaning: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use. Avoid wrapping the cable too tightly.
• Safety Precautions: Avoid exposing the adapter to water, moisture, or high humidity. Do not attempt to open or repair the adapter yourself, as this will void any potential warranty and could be dangerous.
• Protection Features: The adapter is equipped with Over Voltage Protection and Over Heat Protection to safeguard both the adapter and your connected device.

5. Troubleshooting

If you encounter issues with your onerbl AC-DC Adapter, consider the following troubleshooting steps:

• Device Not Charging/Powering On:
  • Ensure the adapter is securely plugged into a working wall outlet.
  • Verify the USB C cable is firmly connected to both the adapter and your device.
  • Check if the wall outlet is functional by plugging in another device.
  • Confirm that your device is compatible with a 5VDC 1A power supply and uses a USB Type C port.
• Adapter Feels Warm:
  • It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and contact support.
  • Ensure adequate ventilation around the adapter; do not cover it.
• Visible Damage:
  • If the adapter or cable shows signs of physical damage, discontinue use immediately to prevent electrical hazards.

6. Product Specifications

7. Warranty and Support

Specific warranty details for this onerbl product are not provided in the available product information. For warranty claims or detailed support, please refer to the documentation included with your purchase or contact the seller directly.

For technical assistance or further inquiries, please reach out to the manufacturer or your point of purchase. Ensure you have your product model number (Model 1) and purchase details available when contacting support.