HOMCOM IT83A-127V00GN0631

Download PDF
Contents

HOMCOM Set of 4 Modern Velvet Dining Chairs Instruction Manual

Model: IT83A-127V00GN0631

1. Introduction

Thank you for choosing the HOMCOM Set of 4 Modern Velvet Dining Chairs. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chairs. Please read all instructions carefully before assembly and retain this manual for future reference.

This set includes four elegant dining chairs designed to enhance your home decor and provide comfortable seating. Each chair features soft velvet-effect fabric, a padded seat, and a curved backrest for a relaxing experience. The chairs are constructed with a powder-coated steel frame for durability and include adjustable foot pads for stability on uneven surfaces.

2. Safety Information

Safety Warning: Follow the provided assembly instructions carefully to avoid injury during installation.

  • Always assemble the chairs on a soft, clean surface to prevent scratches.
  • Ensure all screws and bolts are securely tightened before using the chairs.
  • Do not stand on the chairs or use them as a step stool.
  • Do not exceed the maximum weight capacity of 120 kg per chair.
  • Keep small parts and packaging materials away from children.
  • Periodically check all connections to ensure they remain tight.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer service.

  • 4 x Chair Seats (with curved backrest and padding)
  • 4 x Sets of Chair Legs (powder-coated steel)
  • 1 x Hardware Pack (screws, washers, Allen key, adjustable foot pads)
Diagram showing chair dimensions and components

Image 3.1: Chair components and dimensions. This image illustrates the main parts of the chair and its overall measurements, including seat height, depth, and backrest height.

4. Setup and Assembly

Follow these steps to assemble your HOMCOM dining chairs. It is recommended to have two people for assembly.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage.
  2. Attach Legs to Seat: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Ensure the legs are oriented correctly (usually with the wider part facing the front of the seat).
  3. Secure Legs: Insert the provided screws and washers into the holes. Hand-tighten all screws initially. Do not fully tighten until all screws are in place.
  4. Final Tightening: Once all screws are in place, use the Allen key to fully tighten all screws. Ensure they are snug but do not overtighten, as this can damage the frame.
  5. Adjust Foot Pads: Turn the chair upright. If the chair wobbles, adjust the foot pads on the bottom of each leg until the chair is stable on an even surface.
  6. Repeat for Remaining Chairs: Follow the same steps for the other three chairs in the set.
Close-up of chair legs and adjustable foot pads

Image 4.1: Detail of the stable construction featuring the steel frame and adjustable foot pads. This image highlights the robust leg design and the mechanism for leveling the chair.

5. Operating Instructions (Usage)

Your HOMCOM dining chairs are designed for comfortable seating in various settings.

  • Intended Use: These chairs are suitable for dining rooms, kitchens, living rooms, or guest rooms.
  • Seating: Sit centrally on the chair with your back against the curved backrest for optimal comfort.
  • Weight Limit: Do not exceed the maximum weight capacity of 120 kg (approximately 265 lbs) per chair.
  • Movement: When moving the chairs, lift them rather than dragging them to prevent damage to the legs or floor.
Set of four green velvet dining chairs around a wooden dining table

Image 5.1: The HOMCOM dining chairs arranged around a dining table, demonstrating their intended use in a dining setting.

6. Maintenance

Proper care will extend the life and appearance of your chairs.

  • Cleaning Fabric: For general cleaning, gently vacuum the velvet-effect fabric to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not rub vigorously.
  • Cleaning Frame: Wipe the powder-coated steel legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • Regular Checks: Periodically (e.g., every 3-6 months) check all screws and connections to ensure they are tight. Re-tighten if necessary to maintain stability.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the fabric color to fade.
Close-up showing the soft velvet-effect fabric, padded seat, and curved backrest

Image 6.1: A detailed view highlighting the soft velvet-effect fabric, the thickness of the padded seat, and the ergonomic curved backrest, all important areas for maintenance.

7. Troubleshooting

If you encounter any issues with your chairs, refer to the following common problems and solutions:

  • Chair Wobbles:
    Solution: Ensure the chair is on a flat, even surface. Adjust the foot pads on the bottom of each leg by twisting them until the chair is stable. Also, check that all assembly screws are securely tightened.
  • Loose Parts:
    Solution: If any screws or connections feel loose, re-tighten them using the provided Allen key. Do not overtighten.
  • Squeaking Noise:
    Solution: Squeaking can sometimes occur from loose connections. Re-tighten all assembly screws. If the issue persists, disassemble and reassemble the affected area, ensuring all parts are correctly aligned.
  • Scratches on Floor:
    Solution: Ensure the adjustable foot pads are intact and properly positioned. Consider adding felt pads to the bottom of the foot pads for extra floor protection, especially on delicate surfaces.

8. Specifications

FeatureSpecification
Model NumberIT83A-127V00GN0631
Overall Dimensions50L x 52P x 83A cm (Length x Depth x Height)
Seat Dimensions47 cm (Height from floor), 43 cm (Depth)
Backrest Height40 cm
Weight Capacity120 kg (265 lbs) per chair
MaterialVelvet-effect fabric, Powder-coated steel frame
ColorGreen
Special FeaturesErgonomic design, Adjustable foot pads, Padded seat, Curved backrest
Product Weight22 kg (total for the set)
Detailed diagram of chair dimensions

Image 8.1: A visual representation of the chair's key dimensions, including overall height, width, depth, and seat height.

9. Warranty and Support

For any questions, concerns, or warranty claims regarding your HOMCOM Set of 4 Modern Velvet Dining Chairs, please contact the seller or manufacturer directly through your purchase platform. Please have your model number (IT83A-127V00GN0631) and proof of purchase ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.