1. Safety Information
Please read all instructions carefully before installing or operating this appliance. Keep this manual for future reference.
- Electrical Safety: Ensure the power supply matches the voltage requirements (110 Volts). All electrical wiring must be properly grounded and installed by a qualified electrician in accordance with local codes and standards.
- Fire Hazard: Never leave cooking food unattended. Grease fires can spread quickly. Clean grease filters regularly to prevent grease buildup.
- Installation: Install the range hood according to the provided instructions and maintain proper clearance above the cooking surface.
- Maintenance: Disconnect power before servicing or cleaning the unit.
- Children: Keep children away from the appliance during operation and maintenance.
2. Package Contents
Verify that all components are present before beginning installation.
- 36 inch White Painted Stainless Steel Range Hood
- Aluminum Filter (without charcoal cotton filter)
- Screws & Recirculation Sheet
- Installation Manual
- Installation Drawing
3. Setup & Installation
This range hood can be installed as either ducted (vented to the outside) or ductless (recirculating). Ensure you have the necessary tools and follow all local building codes.
3.1 Pre-Installation
- Measure your cabinet space to ensure the 36-inch hood fits (Product Dimensions: 17.5"D x 35.9"W x 4.7"H).
- Determine if you will use top venting (round/rectangular air outlet) or back venting (rectangular air outlet).
- For ductless operation, ensure the recirculation sheet is properly installed (included). Charcoal filters are sold separately (#FGS-TF39-LW).
3.2 Mounting
- Use the provided installation drawing to mark drilling points on the underside of your cabinet.
- Drill pilot holes and secure the range hood using the supplied screws and anchors.
- Ensure the hood is level and securely fastened to the cabinet.
3.3 Electrical Connection
The unit is hard-wired without a plug (plug sold separately, model: FGS-TF39-DYX). Connect the wires according to the provided wiring diagram in the installation manual. Ensure power is off at the circuit breaker before making any electrical connections.
4. Operating Instructions
The FIREGAS range hood features simple push-button controls for fan speed and lighting.
4.1 Fan Operation
The exhaust fan has two speed settings to effectively remove smoke and odors.
- Low Speed: Ideal for light cooking and simmering.
- High Speed: Use for heavy cooking, frying, or when strong ventilation is needed.
4.2 LED Light
The integrated 2W LED light provides illumination for your cooking area.
- Press the light button to turn the LED light on or off.
4.3 Convertible Ventilation
This range hood supports both ducted and ductless (recirculating) ventilation methods.
- Ducted Mode: Air is expelled outside through a duct system.
- Ductless Mode: Air is filtered through charcoal filters (sold separately) and recirculated back into the kitchen. Ensure the recirculation sheet is installed for this mode.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
5.1 Cleaning Aluminum Mesh Filters
The multi-layer aluminum mesh filters are designed to trap grease and oil. They are dishwasher safe and reusable.
- Turn off the power to the range hood at the circuit breaker.
- Remove the filters by gently pushing the latch and pulling them down.
- Wash the filters in a dishwasher or by hand using warm, soapy water.
- Allow filters to dry completely before reinstalling.
- Reinstall the filters by aligning them and pushing them into place until the latch clicks.
5.2 Exterior Cleaning
Clean the exterior of the range hood with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that could damage the white painted stainless steel finish.
6. Troubleshooting
Before contacting customer service, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power, fan switch off, motor issue | Check circuit breaker. Ensure fan switch is on. Contact support if issue persists. |
| Light does not turn on | No power, light switch off, LED bulb issue | Check circuit breaker. Ensure light switch is on. Contact support for LED replacement. |
| Poor suction | Clogged filters, improper installation, ducting issues | Clean or replace filters. Verify proper installation and ducting. |
| Excessive noise | Loose parts, fan obstruction, motor issue | Check for loose components or obstructions. Contact support if noise is abnormal. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | FGS-UWF39A590AC |
| Product Dimensions | 17.5"D x 35.9"W x 4.7"H |
| Color | White |
| Material | Aluminum, Stainless Steel |
| Air Flow Capacity | 300 Cubic Feet Per Minute (CFM) |
| Noise Level | Less than 57 Decibels (at high speed) |
| Mounting Type | Under Cabinet Mount |
| Controls Type | Push Button |
| Voltage | 110 Volts |
| Number of Speeds | 2 |
| Light Source Type | LED (2 Watt) |
| Filter Type | Mesh (Aluminum) |
| Ventilation Type | Convertible (Ducted/Ductless) |
| Item Weight | 13.9 Pounds |
| Certification | ETL |
8. Warranty & Support
FIREGAS is committed to providing quality products and customer satisfaction.
8.1 Product Warranty
This FIREGAS Range Hood comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
8.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your FIREGAS range hood, please contact our customer support team. Refer to the contact information provided in your original purchase documentation or visit the official FIREGAS website for support details.
