Hilitand 7.83Hz Ultra Low Frequency Pulse Resonator

Introduction

This manual provides comprehensive instructions for the Hilitand 7.83Hz Ultra Low Frequency Pulse Resonator. Please read this manual carefully before use to ensure proper operation, maintenance, and to understand the device's features. Keep this manual for future reference.

Product Overview

Features

• Accurate and Stable Operation: Provides stable ultra-low frequency output for consistent performance.
• Health Benefits: May promote relaxation, improve sleep quality, and enhance overall well-being.
• Status Indicator: An indicator light (red, green, or blue) shows the device's operating status and charging state.
• Stable 7.83Hz Frequency: Delivers a consistent 7.83Hz ultra-low frequency pulse.
• Container Compatibility: Works effectively with glass, porcelain, and iron containers. Avoid aluminum, copper, and other materials that may block the 7.83Hz frequency.

Package Contents

• 1 x Hilitand Resonance Generator
• 1 x USB Cable

Setup

Charging the Device

1. Connect the provided USB cable to the Type-C port on the device and to a standard 5V 1A power source (e.g., a wall adapter or computer USB port).
2. The red indicator light will illuminate, indicating that the device is currently charging.
3. Once fully charged, the green indicator light will turn on.
4. Ensure the device is fully charged before its initial use for optimal performance.

Operating Instructions

Power On/Off and Status Indicators

• To power on the device, ensure it is charged. The device typically activates automatically when disconnected from charging after being fully charged, or via a small power switch (if present).
• When the device is actively transmitting the 7.83Hz frequency, the blue indicator light will flash.
• The device is considered off when all indicator lights are off and it is not connected to a power source. This also indicates the battery may be depleted.

Placement for Optimal Performance

• For optimal transmission of the 7.83Hz frequency, place the generator in a suitable container made of glass, porcelain, or iron.
• Important: Avoid placing the device in containers made of aluminum, copper, or other metallic materials that may interfere with or block the 7.83Hz frequency transmission.

Maintenance

Cleaning

• Wipe the exterior of the device with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals.
• Do not immerse the device in water or any other liquid.

Storage

• Store the device in a cool, dry place.
• Keep away from direct sunlight, extreme temperatures, and high humidity.

Troubleshooting

Device Not Turning On / Not Transmitting

• Check Battery Level: If all indicator lights are off, the battery may be depleted. Recharge the device using the provided USB cable.
• Verify Charging: Ensure the device is properly charging (red light on) and reaches a full charge (green light on).
• Power Cycle: Disconnect from power, wait a few seconds, and reconnect or attempt to power on again.

Indicator Light Not Working

• Verify the device is powered on and has sufficient charge.
• If issues persist after checking power and charge, contact customer support.

Specifications

Warranty Information

No specific warranty information is provided within the product details. For warranty coverage and terms, please refer to the retailer's return policy or contact the manufacturer directly using the support information below.

Customer Support

For further assistance, technical support, or inquiries regarding your Hilitand 7.83Hz Ultra Low Frequency Pulse Resonator, please contact Hilitand customer support through their official website or the customer service channels provided by the retailer where you purchased the product.