1. Introduction
The TONGOU 10A Smart Wi-Fi Switch is a DIN rail-mounted device designed to convert conventional electrical appliances into smart, controllable devices. It integrates Wi-Fi connectivity for remote control via smartphone applications, voice control through smart assistants like Amazon Alexa and Google Assistant, and features real-time energy monitoring. This manual provides essential information for safe installation, configuration, and operation of your smart switch.
2. Safety Information
WARNING: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or other hazards. Always disconnect power before installation or maintenance.
- Ensure the main power supply is turned off before handling the device.
- Operating voltage: AC 90-240 V, 50/60 Hz. Do not exceed these limits.
- Maximum current rating: 10 Amps. Do not connect loads exceeding this rating.
- Maximum wiring capacity: 10 mm² for both power supply and load sides.
- This device is designed for AC loads only. Do not use with DC loads.
- The switch is intended for use in circuits controlling purely ohmic loads such as heaters, incandescent lamps, and ovens.
- Do not install in a distribution box made solely of metal, as this may block the Wi-Fi signal.
- Ensure proper grounding according to local electrical codes.
3. Package Contents
- TONGOU 10A Smart Wi-Fi Switch (x1)
- Instruction Manual (x1)
4. Specifications
| Operation Mode | ON-OFF |
| Current Rating | 10 Amps |
| Operating Voltage | AC 90-240 V, 50/60 Hz |
| Wireless Type | Wi-Fi 2.4 GHz (Does not support 5GHz Wi-Fi) |
| Connectivity Protocol | Wi-Fi |
| Control Method | Remote (App), Voice (Alexa, Google Assistant) |
| Contact Type | Normally Open |
| Connector Type | Screw |
| Terminal | Screw |
| Item Dimensions (L x W x H) | 9 x 2 x 8 Centimeters |
| Item Weight | 109 g |
| International Protection Rating | IP20 |
| Upper Temperature Rating | 80 Degrees Celsius |
| Compatible Devices | Heaters, Incandescent Lamps, Ovens, Amazon Alexa, Google Assistant |
5. Setup
5.1. Physical Installation (Wiring)
The TONGOU Smart Wi-Fi Switch is designed for DIN rail mounting (standard 35mm/1.38in). Follow these steps for safe installation:
- Power Disconnection: Before starting, ensure the main power supply to the circuit where the switch will be installed is completely turned off at the circuit breaker.
- Mounting: Clip the smart switch onto a standard 35mm DIN rail within your electrical distribution box. Ensure the box is not entirely metallic, as this can interfere with the Wi-Fi signal.
- Wiring Connections:
- Connect the live (L) wire from the power supply to the 'L' input terminal on the switch.
- Connect the neutral (N) wire from the power supply to the 'N' input terminal on the switch.
- Connect the live (L) wire of your appliance (load) to the 'L1' output terminal on the switch.
- Connect the neutral (N) wire of your appliance (load) to the 'N1' output terminal on the switch.
- Ensure all connections are secure and wires are properly seated in the screw terminals. The maximum wiring capacity is 10 mm².
- Power Restoration: Once all wiring is complete and verified, restore power to the circuit. The signal light on the switch should begin flashing blue, indicating it is in pairing mode.
Figure 5.1: TONGOU Smart Wi-Fi Switch dimensions and DIN rail installation diagram. Shows input and output terminals, and standard DIN rail size.
Figure 5.2: Example wiring diagrams for the TONGOU Smart Wi-Fi Switch in conjunction with Micro Circuit Breakers (MCB), Residual Current Circuit Breakers with Over Current (RCBO), and Residual Current Circuit Breakers (RCCB/RCD).
5.2. App Installation
The TONGOU Smart Wi-Fi Switch operates with the "Smart Life" or "Tuya" application. Download the app from your smartphone's app store:
- For Android devices, search for "Smart Life" or "Tuya" on Google Play Store.
- For iOS devices, search for "Smart Life" or "Tuya" on the Apple App Store.
- Install the application and create an account or log in if you already have one.
5.3. Device Pairing
To connect your smart switch to the app:
- Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network. The switch does not support 5 GHz Wi-Fi.
- Open the "Smart Life" or "Tuya" app and log in.
- Tap the "+" icon in the top right corner to add a device.
- Select the appropriate device type (e.g., "Electrical Switch" or "Circuit Breaker (Wi-Fi)").
- Confirm that the signal light on the switch is flashing blue. If not, press and hold the physical button on the switch for 5-10 seconds until it starts flashing.
- Follow the on-screen instructions in the app to connect the switch to your Wi-Fi network. You will need to enter your Wi-Fi password.
- Once connected, the signal light will turn solid blue. You can then rename the device within the app.
Figure 5.3: Pairing operation steps, showing physical switch, app login, adding device, and Wi-Fi connection.
6. Operating Instructions
6.1. App Remote Control
After successful pairing, you can control your connected appliances from anywhere using the "Smart Life" or "Tuya" app:
- Open the app and select your TONGOU Smart Wi-Fi Switch.
- Tap the power icon to turn the connected appliance ON or OFF.
- The app interface will display the current status of the switch.
Figure 6.1: App interface demonstrating remote control and usage data recording.
6.2. Voice Control
The switch is compatible with Amazon Alexa and Google Assistant. To enable voice control:
- Link your "Smart Life" or "Tuya" account to Amazon Alexa or Google Home app.
- Discover new devices within the Alexa or Google Home app.
- Once discovered, you can use voice commands such as:
- "Alexa, turn on [Device Name]"
- "Hey Google, turn off [Device Name]"
6.3. Energy Monitoring
The switch provides real-time and historical power consumption data:
- Access the energy monitoring section within the "Smart Life" or "Tuya" app for your switch.
- View current load current, voltage, and power.
- Review historical power consumption logs by hour, day, month, and year.
6.4. Timer Functions
Utilize the app's timer functions to automate your appliances:
- Schedule: Set specific times for the switch to turn ON or OFF daily or on selected days.
- Countdown: Set a timer for the switch to turn ON or OFF after a specified duration.
- Circulate: Program the switch to cycle ON and OFF at regular intervals.
- Sunrise/Sunset Mode: Automate operations based on local sunrise and sunset times.
7. Maintenance
The TONGOU Smart Wi-Fi Switch requires minimal maintenance. Follow these guidelines:
- Ensure the device is kept clean and free from dust. Use a dry, soft cloth for cleaning.
- Do not use liquid cleaners or solvents.
- Regularly check wiring connections for tightness, especially after initial installation.
- Avoid exposing the device to extreme temperatures or humidity beyond its specified operating conditions.
- Periodically check for firmware updates within the "Smart Life" or "Tuya" app to ensure optimal performance and security.
8. Troubleshooting
If you encounter issues with your TONGOU Smart Wi-Fi Switch, refer to the following common problems and solutions:
8.1. Signal Light Status
Figure 8.1: Visualization Window explaining signal light states: Flashing Blue (pairing mode), Solid Blue (network connected), Black (network not connected).
- Flashing Blue: Device is in pairing mode, ready to be connected to the app.
- Solid Blue: Network is connected, and the device is online.
- Black (Off): Network is not connected, or the device is powered off.
8.2. Common Issues
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | No power supply; incorrect wiring. | Check the main circuit breaker. Verify all wiring connections are secure and correct according to Section 5.1. |
| Cannot pair the device (signal light not flashing blue). | Not in pairing mode. | Press and hold the physical button on the switch for 5-10 seconds until the signal light starts flashing blue. |
| Device fails to connect to Wi-Fi (signal light remains flashing or turns off). | Incorrect Wi-Fi password; 5GHz Wi-Fi network; weak signal; router issues. |
|
| App shows device offline. | Wi-Fi disconnected; power outage. | Check your Wi-Fi router and internet connection. Verify the switch has power (signal light should be solid blue). If Wi-Fi is stable, try restarting the switch by cycling its power. |
| Voice control not working. | Account not linked; device not discovered; incorrect command. |
|
9. Warranty and Support
For warranty information and technical support, please contact the manufacturer or authorized distributor.
- Manufacturer: Changyou Technology (Zhejiang) Co., Ltd.
- Importer/Packer: HIVAGI INTERNATIONAL
- Website: www.hivagi.in
- Customer Care: +91 90232 97428
Please retain your purchase receipt for warranty claims.
