Introduction
This manual provides essential instructions for the safe and efficient use of your Altec Lansing HYDRATREK Magnetic Bluetooth Speaker. The HYDRATREK speaker is designed for portability and durability, featuring IP67 waterproof, sandproof, snowproof, and shockproof ratings, along with magnetic mounting capabilities and True Wireless Pairing for an enhanced audio experience.

Image: The Altec Lansing HYDRATREK speaker in Aqua/White, showcasing its compact design and integrated carabiner clip.
Package Contents
- Altec Lansing HYDRATREK Magnetic Bluetooth Speaker
- Speaker Mount
- Carabiner Clip (pre-attached)
- USB-C Charging Cable (not explicitly listed but implied for USB-C Quick Charge)
Controls and Indicators
Familiarize yourself with the speaker's control buttons located on the top surface:

Image: A close-up view of the speaker's top panel, highlighting the Volume Down (-), Power (circle with line), and Volume Up (+) buttons.
- Power Button (Center): Press and hold to power on or off. Short press to play/pause audio or answer/end calls. Double press to activate voice assistant.
- Volume Up Button (+): Short press to increase volume. Long press for next track.
- Volume Down Button (-): Short press to decrease volume. Long press for previous track.
- LED Indicator: (Located near power button) Indicates power status, charging status, and Bluetooth pairing mode.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Locate the USB-C charging port on the side, typically protected by a waterproof flap.
- Open the protective flap covering the USB-C port.
- Connect the USB-C charging cable to the speaker's port.
- Connect the other end of the cable to a USB power source (e.g., wall adapter, computer USB port).
- The LED indicator will show charging status (e.g., red for charging, off or green for fully charged).
- Once fully charged, disconnect the cable and ensure the protective flap is securely closed to maintain waterproof integrity.

Image: The side of the speaker revealing the USB-C charging port, protected by a rubber flap to ensure water resistance.
2. Powering On/Off
- To Power On: Press and hold the Power button until the LED indicator lights up and you hear an audible cue.
- To Power Off: Press and hold the Power button until the LED indicator turns off and you hear an audible cue.
3. Bluetooth Pairing
- Ensure the speaker is powered on and the LED indicator is flashing, indicating it's in pairing mode. If not, it may automatically enter pairing mode upon power-on.
- On your device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Search for available devices and select "HYDRATREK" from the list.
- Once connected, the LED indicator will typically turn solid blue, and you will hear a confirmation tone.
4. True Wireless Pairing (TWS)
To achieve stereo sound, you can pair two HYDRATREK speakers together:
- Ensure both HYDRATREK speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, double-press the Power button. It will enter TWS pairing mode.
- The speakers will automatically search for and connect to each other. You will hear a confirmation tone once connected.
- Once TWS is established, connect your device to one of the speakers via Bluetooth as described in step 3. Both speakers will now play audio in stereo.
Operation
1. Basic Audio Playback
- Play/Pause: Short press the Power button.
- Volume Adjustment: Short press the Volume Up (+) or Volume Down (-) buttons.
- Next Track: Long press the Volume Up (+) button.
- Previous Track: Long press the Volume Down (-) button.
2. Voice Assistant
To activate your device's voice assistant (e.g., Siri, Google Assistant), double-press the Power button.
3. Mounting Options
The HYDRATREK speaker offers versatile mounting options for various environments:
- Magnetic Mounting: The speaker features a strong built-in magnet, allowing it to securely attach to any metal surface.

Image: The HYDRATREK speaker demonstrating its magnetic attachment capability on a metal pole.
- Carabiner Clip: Use the integrated carabiner clip to attach the speaker to backpacks, belt loops, or other gear for easy portability.

Image: The speaker attached to a backpack via its carabiner clip, illustrating its portability.
- Speaker Mount: Utilize the included speaker mount to attach the device to handlebars (e.g., bicycles) or other compatible structures.

Image: The HYDRATREK speaker securely fastened to a bicycle handlebar using the provided mount.
Maintenance
1. Cleaning
To clean your speaker, use a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the speaker's finish or waterproof seals.
2. Waterproof Care (IP67)
The HYDRATREK speaker is rated IP67, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. To maintain this rating:
- Always ensure the USB-C charging port flap is securely closed before exposing the speaker to water or dust.
- Do not submerge the speaker beyond the specified depth or duration.
- After exposure to saltwater or chlorinated water, rinse the speaker with fresh water and allow it to air dry completely before charging or opening the port flap.
Troubleshooting
- Speaker not powering on: Ensure the battery is charged. Connect to a power source and try again.
- Unable to pair via Bluetooth: Make sure the speaker is in pairing mode (flashing LED). Turn off Bluetooth on other nearby devices that might be connected. Restart the speaker and your device.
- No sound or low volume: Check the volume levels on both the speaker and your connected device. Ensure the speaker is not muted.
- True Wireless Pairing not working: Ensure both speakers are fully charged and not connected to any other Bluetooth device before attempting TWS pairing.
- Sound distortion: Move the speaker closer to your Bluetooth device to reduce interference. Ensure the audio source is of good quality.
Specifications
| Feature | Specification |
|---|---|
| Model Name | HYDRATREK |
| Model Number | IMW1012 |
| Connectivity Technology | Bluetooth Wireless |
| Bluetooth Range | Up to 100 Feet |
| Speaker Output Power | 5W RMS |
| Audio Driver Type | Dynamic Driver (2") with Passive Radiator (2" x 1) |
| Battery Life | Up to 6 hours (continuous playtime) |
| Battery Type | 1 Lithium Ion (400 mAh) |
| Waterproof Rating | IP67 (Waterproof, Sandproof, Snowproof, Shockproof) |
| Special Features | Built-in Microphone, Magnetic Mounting, True Wireless Pairing, Voice Assistant |
| Included Components | Speaker Mount, Carabiner, Built-In Magnet |
| Product Dimensions | 3"D x 4.5"W x 5.5"H |
| Item Weight | 1.04 pounds |
Warranty Information
The Altec Lansing HYDRATREK speaker comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Altec Lansing website or the warranty card included with your product.
Support
For further assistance, technical support, or customer service inquiries, please visit the official Altec Lansing support website or contact their customer service department. Contact details can typically be found on the product packaging or the official website.