Intelbras AMT 8000 PRO Wireless Alarm Control Panel User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras AMT 8000 PRO Wireless Alarm Control Panel. The AMT 8000 PRO is a state-of-the-art security solution designed for robust protection and maximum connectivity, featuring wireless communication, app monitoring, and extensive zone management capabilities.

2. Key Features

• Wireless Connectivity: Fully wireless solution, ensuring clean installation without extensive wiring.
• Extensive Coverage: Wireless range of up to 1000 meters in open areas.
• Integrated Siren: Built-in siren with sound spreading technology to deter intruders and prevent easy localization.
• Easy Device Registration: External button for convenient registration of wireless devices, eliminating the need to open the control panel.
• Flexible Communication: Supports Ethernet/Wi-Fi, GPRS, 3G, and 4G connections (with compatible modules).
• Integrated Wi-Fi Module: Allows direct connection to wireless internet networks.
• High Capacity: Supports 64 zones, 16 independent partitions, 16 keypads, up to 98 remote controls, and 16 external sirens.
• App Monitoring: Monitor and control the system via a mobile application.
• Repeater Support: Compatible with up to 4 repeaters for extended wireless coverage.

3. Package Contents

Upon opening the package, verify that all components are present and in good condition. The standard package for the Intelbras AMT 8000 PRO typically includes:

• Intelbras AMT 8000 PRO Alarm Control Panel
• Power Adapter (Wired Electric)
• Mounting Hardware (Screws, Wall Plugs)
• User Manual (This Document)

Note: Additional accessories such as remote controls, keypads, and sensors are sold separately.

4. Setup and Installation

4.1. Choosing an Installation Location

Select a central location within the protected area, away from direct sunlight, heat sources, and excessive moisture. Ensure the location allows for optimal wireless signal propagation to all sensors and devices. The unit is designed for wall mounting.

Image: Intelbras AMT 8000 PRO mounted on a wall, illustrating a typical installation scenario.

4.2. Mounting the Control Panel

1. Carefully open the control panel casing.
2. Using the backplate as a template, mark the drilling points on the wall.
3. Drill holes and insert wall plugs if necessary.
4. Secure the control panel to the wall using the provided screws.

Image: Rear view of the Intelbras AMT 8000 PRO, showing the mounting holes and connection terminals for wired power and other components.

4.3. Power Connection

Connect the provided power adapter to the control panel's power input. Ensure the power source is stable and meets the panel's requirements. The system operates on wired electric power.

4.4. Network Connection (RJ45 / Wi-Fi)

The AMT 8000 PRO offers flexible network connectivity:

• RJ45 (Wired Ethernet): Connect an Ethernet cable from your router to the RJ45 port on the control panel for a stable wired internet connection.
• Wi-Fi (Wireless): The integrated Wi-Fi module allows connection to your wireless network. Refer to the mobile application's setup guide for Wi-Fi configuration steps.

Image: The Intelbras AMT 8000 PRO with a Wi-Fi signal icon above it, indicating its wireless connectivity capabilities.

4.5. Device Registration

To register wireless devices (sensors, keypads, remote controls), use the external registration button on the control panel. Follow the specific instructions provided with each wireless device for pairing. The system supports up to 64 zones, 16 keypads, and 98 remote controls.

5. Operating the System

5.1. Mobile Application Control

The primary method of control for the AMT 8000 PRO is through its dedicated mobile application. Download the Intelbras security app from your device's app store. Once installed, follow the in-app instructions to connect to your alarm panel.

• Arming/Disarming: Use the app to arm the entire system or specific partitions (up to 16 independent partitions).
• Zone Status: View the real-time status of all 64 zones.
• Event Log: Access a history of system events and alarms.
• User Management: Add or remove users and assign access levels.
• System Settings: Configure various system parameters, including siren volume, entry/exit delays, and notification preferences.

5.2. Keypad Operation

If keypads are installed (up to 16 supported), they provide an alternative method for arming, disarming, and checking system status. Refer to the keypad's specific manual for detailed operation instructions.

5.3. Remote Control Operation

Remote controls (up to 98 supported) offer quick arming and disarming functions. Press the designated buttons to activate or deactivate the alarm system.

5.4. Integrated Siren

The control panel features an integrated siren that activates upon an alarm event. Its sound spreading technology helps to disorient intruders and makes it difficult to locate the panel by sound alone.

6. Maintenance

Regular maintenance ensures the optimal performance and longevity of your Intelbras AMT 8000 PRO system.

• Cleaning: Use a soft, dry cloth to clean the exterior of the control panel. Do not use abrasive cleaners or solvents.
• Battery Check (for wireless devices): Periodically check the battery status of all connected wireless sensors, keypads, and remote controls via the mobile application. Replace batteries as indicated by low battery warnings.
• System Test: Conduct a full system test at least once a month. This includes testing all sensors, the siren, and communication with the monitoring center (if applicable).
• Firmware Updates: Check for and install any available firmware updates for the control panel via the mobile application to ensure the latest features and security enhancements.

7. Troubleshooting

This section addresses common issues you might encounter with your AMT 8000 PRO system.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Intelbras technical support.

8. Technical Specifications

9. Safety Information

• Always disconnect power before performing any maintenance or installation.
• Do not expose the control panel to water or excessive humidity.
• Ensure proper ventilation around the unit.
• Only use the power adapter supplied with the device.
• Installation should be performed by qualified personnel if you are unsure about any steps.
• Keep out of reach of children.

10. Warranty and Support

For warranty information, please refer to the warranty card included with your product or visit the official Intelbras website. For technical assistance, troubleshooting beyond this manual, or to inquire about additional accessories, please contact Intelbras customer support.

Intelbras Official Website: www.intelbras.com.br

Note: Support contact details may vary by region. Please check the Intelbras website for local contact information.