Brabantia Mindset Hand Soap Lotion Dispenser User Manual

Introduction

This manual provides essential information for the safe and efficient use of your Brabantia Mindset Hand Soap Lotion Dispenser. Please read these instructions carefully before first use and retain them for future reference.

Image: The Brabantia Mindset Hand Soap Lotion Dispenser, featuring a white metal body and a clear glass base.

Product Overview

The Brabantia Mindset Hand Soap Lotion Dispenser is designed for dispensing liquid soap or lotion. It features a durable metal body, a removable glass holder, and a non-drip pump mechanism. The dispenser has a capacity of 6.8 ounces (200 ml).

• Capacity: 6.8 ounces / 200 ml, suitable for most liquid soap and lotion refills.
• Easy Refill: Features a large opening for convenient refilling.
• Non-Drip Pump: Engineered to prevent drips and maintain cleanliness.
• Versatile Use: The large nozzle is suitable for both liquid soaps and lotions.
• Easy Cleaning: Composed of a metal body and a removable glass holder for simple cleaning.

Setup

1. Unpack: Carefully remove all components from the packaging. Ensure all parts are present: the metal pump assembly and the glass holder.
2. Separate Components: Twist the metal pump assembly counter-clockwise to separate it from the glass holder.
3. Fill the Glass Holder: Pour your desired liquid hand soap or lotion into the glass holder. Do not overfill; leave a small space at the top to prevent spillage when reattaching the pump.
   

   Image: A hand pouring liquid soap into the clear glass holder of the dispenser.

4. Reassemble: Carefully place the metal pump assembly back onto the filled glass holder. Twist clockwise until securely fastened.
   

   Image: A hand reattaching the white pump assembly to the glass holder.
5. Prime the Pump: Press the pump head several times until the liquid begins to dispense. This may require multiple presses during the initial setup.

Operating Instructions

To dispense soap or lotion, place your hand under the nozzle and press down firmly on the pump head. The non-drip mechanism is designed to provide a clean dispense.

Image: A hand pressing the pump of the dispenser to release liquid soap.

Official Product Video

Maintenance and Cleaning

Regular cleaning will ensure the longevity and optimal performance of your dispenser.

1. Refilling: When the liquid level in the glass holder is low, separate the metal pump assembly from the glass holder and refill as described in the "Setup" section.
2. Cleaning the Glass Holder: The glass holder can be washed with warm soapy water. Rinse thoroughly and dry before reassembling.
3. Cleaning the Pump Mechanism: To clean the internal pump mechanism, fill the glass holder with warm water and pump it through the dispenser until the water runs clear. For a more thorough cleaning, disassemble the pump and rinse under running water.
   

   Image: The Brabantia Mindset dispenser disassembled, showing the separate metal pump unit and glass holder for cleaning.
4. Exterior Cleaning: Wipe the exterior of the metal body with a soft, damp cloth. Avoid abrasive cleaners that may damage the finish.

Troubleshooting

If you encounter issues with your dispenser, refer to the following common solutions:

• Pump Not Dispensing or Only Dispensing Air:

  This can occur if the pump is not properly primed or if air is trapped. To resolve:

  1. Remove the pump assembly from the glass holder.
  2. Turn the pump assembly upside down.
  3. Gently push the intake stem (the tube that goes into the liquid) downwards to open the internal valve.
  4. Using a syringe or eyedropper, fill the pump cylinder with the liquid you intend to use (especially if it's thicker than water). Inject the liquid through the intake stem while holding the valve open. Repeat until the pump cylinder is at least 80% full.
  5. Release the intake stem to close the valve.
  6. Reassemble the pump onto the filled glass holder and press several times to prime.
• Soap/Lotion Spills or Leaks:

  Ensure the glass holder is securely screwed onto the metal pump assembly. Check that the threads are clean and free from obstruction. Do not overfill the glass holder.

• Squeaking Sound During Pumping:

  A squeaking sound may indicate friction within the pump mechanism. Try cleaning the pump as described in the "Maintenance and Cleaning" section. If the issue persists, ensure the liquid being used is not too thick or causing residue buildup.

Specifications

Warranty Information

This Brabantia product is covered by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, please refer to the official Brabantia website or contact customer support.

Support

For further assistance, product inquiries, or to report any issues, please visit the official Brabantia website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.

You can also visit the Brabantia Store on Amazon for more information and related products.