Product Overview
The GAOMON 6 Inch Full Metal Platform Bed Frame (Model: PHO_0YIO) is designed to provide a sturdy and noise-free foundation for your mattress. This low-profile bed frame offers practical under-bed storage space and eliminates the need for a box spring. Its robust metal construction ensures durability and stability.

Image: Fully assembled GAOMON 6 Inch Full Metal Platform Bed Frame with mattress and bedding in a bedroom setting.
Important Safety Information
WARNING:
- Exercise caution around sharp edges during assembly and handling.
- Always follow the assembly instructions precisely to prevent instability and potential injury.
- Ensure all bolts are securely tightened before placing a mattress on the frame. Periodically check and re-tighten all connections.
- Do not exceed the maximum weight capacity of 800 lbs.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Image: All individual components of the bed frame, including metal bars, legs, and hardware, laid out on a rug.
Part List:
| Part | Description | Quantity |
|---|---|---|
| L1 | Side Rails | 4 |
| L2 | Center Support Bars | 2 |
| L3 | Legs with Connectors | 4 |
| P1 | Slats | 20 |
| F1 | Screws (M6x15mm) | 4 |
| F2 | Nuts (M6) | 4 |
| T1 | Allen Wrench | 1 |
| T2 | Wrench | 1 |
| G1 | Gloves | 1 pair |
Note: Extra screws and nuts may be provided.
Setup and Assembly
Assembly is designed to be straightforward. Please follow these steps carefully.
Step 1: Unpack and Identify Components
Carefully open the packaging and lay out all components on a clean, soft surface to prevent scratches. Identify each part using the provided part list and labels (L1, L2, L3, P1, etc.).

Image: All components, including labeled metal pieces and hardware, laid out on the floor for easy identification.
Step 2: Assemble the Main Frame Sections
Connect the side rails (L1) and center support bars (L2) using the provided screws and nuts. Ensure the connections are firm but do not fully tighten all bolts until the entire frame is assembled.
Image: The assembled bed frame structure, illustrating its dimensions (75.2"L x 54.1"W x 6"H) and maximum weight capacity of 800 lbs.
Step 3: Attach the Legs
Attach the legs with connectors (L3) to the main frame sections. Use the provided screws and tighten them securely. The legs are designed to provide stable support and include plastic pads for floor protection.

Image: Detailed view of the robust metal structure and the plastic floor protection pads on the bed frame legs.
Step 4: Install the Slats
Once the main frame and legs are assembled, insert the slats (P1) into their designated slots on the frame. These metal slats provide direct support for your mattress, eliminating the need for a box spring.

Image: The bed frame fully assembled with all metal slats in place, providing a sturdy base for a mattress.
Step 5: Final Tightening
After all components are in place, go back and fully tighten all screws and bolts using the provided Allen wrench and wrench. This ensures the frame's stability and prevents any noise or wobbling.
Note: The frame offers approximately 4.5 inches of under-bed clearance for storage.

Image: A close-up view of the bed frame leg, indicating the 4.5-inch under-bed clearance for storage.
Operating Instructions
This bed frame is designed for use with a full-size mattress. No box spring is required. Simply place your mattress directly onto the assembled metal slats.
The frame's low-profile design and noise-free construction contribute to a comfortable sleeping environment.
Maintenance
- Cleaning: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners that may damage the finish.
- Tightening: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
- Movement: When moving the bed frame, lift it rather than dragging to prevent damage to the frame or your flooring.
Troubleshooting
Noise/Squeaking:
If the bed frame produces noise, check all bolts and connections. Loose connections are the most common cause of squeaking. Tighten all bolts securely.
Instability/Wobbling:
Ensure the frame is assembled on a flat, level surface. Verify that all legs are making full contact with the floor and that all connections are tightened. If the issue persists, disassemble and reassemble the affected sections, paying close attention to the instructions.
Specifications
| Feature | Detail |
|---|---|
| Model Number | PHO_0YIO |
| Size | Full |
| Product Dimensions | 75.2"L x 54.1"W x 6"H |
| Material | Metal |
| Color | Black |
| Weight Capacity | 800 lbs |
| Item Weight | 28.9 pounds |
| Assembly Required | Yes |
| Under-bed Storage | Yes (approx. 4.5 inches clearance) |
| Box Spring Required | No |
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official GAOMON website. Keep your purchase receipt for warranty claims.
Protection plans are available for purchase separately:
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect (monthly billing)
Return Policy: This product typically has a 90-day return/replacement policy.