Introduction
Thank you for choosing the ProForm Ultimate Works PFBE50220 Adjustable Workout Bench. This manual provides essential information for the safe and effective use of your new fitness equipment. Please read it thoroughly before assembly and operation, and retain it for future reference.
The ProForm Ultimate Works bench is designed to support a variety of exercises, including hyper back extensions, abdominal routines, decline bench presses, flat bench presses, and other strength training activities, providing a comprehensive total-body workout solution for your home gym. For additional trainer-led workouts, you may explore the iFit app.
Important Safety Information
WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual before using the equipment.
- Consult a physician before beginning any exercise program.
- Keep children and pets away from the equipment at all times.
- Place the equipment on a level surface with at least 0.6 meters (2 feet) of clearance around it.
- Inspect the equipment for worn or loose parts before each use. Do not use if damaged.
- Wear appropriate exercise clothing and athletic shoes.
- The maximum user weight capacity for this equipment is 300 pounds (approximately 136 kg).
- Use the equipment only as described in this manual.
- Stop exercising immediately if you feel faint, dizzy, or experience pain.
Assembly Instructions
The ProForm Ultimate Works bench is designed for straightforward assembly. It is recommended to have two people for assembly, though it can be completed by one person in under 30 minutes.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the parts diagram (not included in this digital manual, refer to physical manual) are present.
- Attach Base Stabilizers: Secure the front and rear base stabilizers to the main frame using the provided bolts and washers. Ensure they are tightened securely.
- Install Bench Pad: Attach the main bench pad to the adjustable frame. Ensure all locking pins or adjustment mechanisms are correctly engaged.
- Connect Pulley System: Route the cables of the pulley system as indicated in the diagram (refer to physical manual). Ensure the cables are free from kinks and move smoothly through all pulleys.
- Final Checks: Before first use, double-check all bolts, nuts, and adjustment pins to ensure they are fully tightened and securely in place.

Image: The ProForm Ultimate Works Adjustable Workout Bench in its fully assembled, inclined position.

Image: The ProForm Ultimate Works Adjustable Workout Bench folded into a compact position for storage.
Operating Instructions
The ProForm Ultimate Works bench offers multiple configurations to target various muscle groups. Always ensure the bench is stable and adjustment pins are fully engaged before starting any exercise.
Adjusting the Bench Angle
The bench angle can be adjusted to accommodate different exercises and user preferences. Locate the adjustment pins or levers on the main frame. Pull the pin(s) out, adjust the bench to the desired incline or decline position, and release the pin(s) to lock it securely in place. Ensure the pin is fully seated before use.

Image: The workout bench adjusted to an inclined position, ready for various exercises.
Using the Pulley System
The integrated pulley system allows for a wide range of resistance exercises. Attach the handles or ankle straps to the cable ends. The resistance level can often be adjusted by changing the bench angle or by adding external weights (if supported by your specific model, refer to product specifications).
Exercise Examples
- Hyper Back Extension: Adjust the bench to a suitable angle. Position your hips over the pivot point, securing your feet under the foot pads. Lower your torso forward, then raise it back up, engaging your glutes and hamstrings.

Image: A user demonstrating a kneeling exercise, utilizing the bench's adjustable features.
- Abdominal Routines (Sit-ups/Crunches): Set the bench to a decline position. Secure your feet under the foot pads. Perform sit-ups or crunches, focusing on controlled movements.

Image: A user performing abdominal crunches on the decline bench, engaging core muscles.
- Decline/Flat Bench Press: Adjust the bench to a flat or decline position. Lie on the bench and use dumbbells or a barbell (not included) to perform presses. Ensure proper form and spotter assistance if lifting heavy weights.

Image: A user lying on the bench, demonstrating a position suitable for leg presses or chest exercises with the pulley system.
Maintenance
Regular maintenance ensures the longevity and safe operation of your ProForm Ultimate Works bench.
- Cleaning: Wipe down the bench pad and frame with a damp cloth after each use to remove sweat and dirt. Avoid abrasive cleaners.
- Inspection: Periodically check all nuts, bolts, and moving parts for tightness and wear. Tighten any loose fasteners. Inspect cables and pulleys for fraying or damage. Replace worn parts immediately.
- Lubrication: Apply a small amount of silicone-based lubricant to moving parts and pivot points as needed to ensure smooth operation.
- Storage: When not in use, the bench can be folded for compact storage. Ensure it is stored in a dry, clean environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bench feels unstable or wobbles. | Loose fasteners; uneven surface. | Ensure all bolts and nuts are tightened. Move the bench to a level surface. |
| Adjustment pins do not engage properly. | Obstruction; bent pin; misaligned holes. | Check for debris. Ensure holes are aligned. If pin is bent, contact support for replacement. |
| Pulley system is not smooth or makes noise. | Dry cables/pulleys; frayed cable; obstruction. | Lubricate pulleys and cable. Inspect cable for damage; replace if frayed. Check for obstructions. |
Product Specifications
| Model Number: | PFBE50220 |
| Brand: | ProForm |
| Material Type: | Alloy Steel (Frame: Iron) |
| Color: | Black |
| Maximum Weight Capacity: | 300 pounds (approximately 136 kg) |
| Product Dimensions (L x W x H): | 121 cm x 70 cm x 121 cm (approximately 47.6 x 27.6 x 47.6 inches) |
| Item Weight: | 40.8 kg (approximately 89.9 pounds) |
| Included Components: | Pulley System |
| UPC: | 043619647488 |

Image: The workout bench with its approximate dimensions (length, width, height) clearly indicated.
Warranty Information
This ProForm Ultimate Works Adjustable Workout Bench is covered by a manufacturer's warranty for 90 days for parts and labor from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modifications, or improper assembly.
For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official ProForm website.
Customer Support
If you have any questions, require assistance with assembly, operation, or maintenance, or need to report a missing or damaged part, please contact ProForm customer support.
For further assistance, visit the official ProForm store or website:
- ProForm Store: Visit ProForm Store on Amazon
- Manufacturer: iFIT Fitness
Please have your model number (PFBE50220) and serial number (if applicable) ready when contacting support.