Nathan James 23003-2

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Nathan James Gracie Bar Chair Instruction Manual

Model: 23003-2

1. Introduction

This manual provides essential information for the assembly, operation, maintenance, and specifications of your Nathan James Gracie Modern Upholstered Bar Chair. Please read these instructions carefully before proceeding with assembly or use to ensure proper function and longevity of the product.

2. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Gracie Bar Chair components (for a set of 2 chairs)
  • Assembly hardware kit
  • Instruction sheet

3. Setup and Assembly

Assembly of the Gracie Bar Chair is designed to be straightforward, typically requiring 20-40 minutes per chair. It is recommended to use the packaging carton as a working surface to prevent damage to the product or your floor during assembly.

Required Tools:

  • Philips head screwdriver (not included)

Assembly Steps:

  1. Unpack all components and lay them out on a clean, flat surface.
  2. Identify all hardware pieces and match them with the assembly diagram.
  3. Attach the chair legs to the seat frame using the provided hardware. Ensure all connections are secure but do not overtighten initially.
  4. Attach the backrest to the seat frame.
  5. Once all parts are loosely assembled, place the chair upright on a level surface.
  6. Gradually tighten all screws and bolts, ensuring the chair remains level and stable.
Two Nathan James Gracie Bar Chairs, fully assembled, showing the design and structure.

Image: Two assembled Gracie Bar Chairs, illustrating the final product.

4. Operating Instructions

The Gracie Bar Chair is designed for seating at bar-height surfaces, such as kitchen islands or home bars.

Usage Guidelines:

  • Weight Limit: The chair has a maximum weight recommendation of 300 pounds (136 kg). Do not exceed this limit to prevent damage or injury.
  • Stability: Always ensure the chair is placed on a flat, stable surface before use. Avoid standing on the chair.
  • Comfort Features: The chair includes a wide seat with a C-shaped faux leather cushion and a built-in footrest for enhanced comfort during use.
Two Nathan James Gracie Bar Chairs positioned at a kitchen island, demonstrating typical use.

Image: Gracie Bar Chairs in a kitchen setting, showing their intended use.

5. Maintenance and Care

Proper care will help maintain the appearance and extend the life of your bar chair.

Cleaning Instructions:

  • Frame: Wipe the wood frame with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the wood finish.
  • Upholstery: For the faux leather upholstery, gently wipe with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can spread the stain. Test any cleaning solution on an inconspicuous area first.

General Care:

  • Periodically check and tighten all hardware to ensure the chair remains stable.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures, which can cause fading or damage to materials.
Close-up image of the faux leather upholstery and wood finish of the Gracie Bar Chair.

Image: Detail of the faux leather and wood materials.

6. Troubleshooting

If you encounter issues with your Gracie Bar Chair, refer to the following common problems and solutions:

Stability Issues (Wobbling):

  • Cause: Loose hardware or uneven assembly.
  • Solution: Place the chair on a flat surface. Loosen all assembly bolts slightly, then sit on the chair to settle the legs. While seated, gradually tighten all bolts. This helps ensure even weight distribution and stability.

Damage or Breakage:

  • Cause: Exceeding the weight limit, improper assembly, or intensive/prolonged use beyond design specifications.
  • Solution: Always adhere to the 300-pound weight limit. Ensure all assembly steps are followed correctly. If damage occurs due to manufacturing defects, refer to the warranty information.

7. Specifications

FeatureDetail
Product Dimensions (D x W x H)23" x 17" x 39"
ColorMedium Brown/Light Brown
BrandNathan James
SizeBar Height - Set of 2
StyleModern
Furniture FinishWood
Maximum Weight Recommendation300 Pounds
Assembly RequiredYes (20-40 minutes)
Number of Items2
Item Weight18 pounds (per chair)
Model Number23003-2
UPC842196014986
Frame MaterialRubberwood
Seat Material TypeFaux Leather
Diagram showing the dimensions of the Nathan James Gracie Bar Chair: 38.6 inches total height, 29.4 inches seat height, 22.3 inches depth, 17.3 inches width.

Image: Dimensional diagram of the Gracie Bar Chair.

8. Warranty and Support

Nathan James stands behind the quality of its products.

Warranty Information:

  • The Gracie Bar Chair comes with a lifetime manufacturer warranty.
  • Your purchase is backed by a 100% money-back guarantee.
  • If you experience any quality issues, please contact Nathan James customer support for assistance or a replacement.

Customer Support:

For any questions, concerns, or warranty claims, please visit the official Nathan James website or refer to the contact information provided with your purchase documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.