soleilx Universal 4-in-1 Gate Remote Control Instruction Manual

1. Introduction

The soleilx Universal 4-in-1 Gate Remote Control is designed for broad compatibility with most rolling code and fixed code remote controls, operating across a frequency range of 280 to 900 MHz. This device is suitable for controlling various automated systems, including gates, garage doors, alarms, electric doors, and windows.

This multi-frequency duplicator can store up to four different remote control codes, allowing a single unit to operate up to four distinct automated systems. The remote features a durable Soft Touch rubber design, offering resistance to impacts and water, ensuring reliable performance in various conditions.

The latest Version 15.0 incorporates significant enhancements, including an extended operating range, an expanded compatibility list, and a reinforced signal for improved performance.

The soleilx universal remote control, featuring a black body with green buttons and trim.

2. Safety Information

• Keep the remote control out of reach of children.
• Do not expose the device to extreme temperatures, direct sunlight, or excessive moisture.
• Dispose of used batteries according to local regulations.
• Do not attempt to disassemble or modify the remote control, as this may void the warranty and cause malfunction.

3. Setup and Programming

This section outlines the programming procedure for duplicating an existing remote control. For optimal results, ensure the original remote is functioning correctly and you are in a clear, unobstructed area.

Programming Steps:

1. Enter Programming Mode: On the new soleilx remote, press and hold button 1. While holding button 1, press button 3 four times. The red indicator light will begin to flash slowly, indicating that the remote is in programming mode.
2. Prepare Original Remote: Bring your original remote control (e.g., a FAAC master remote) within 3 cm of the soleilx remote. Press and hold the button on your original remote that you wish to duplicate (e.g., button 1).
3. Frequency Detection and Transfer: The universal remote's indicator light will turn solid once it detects the frequency of the original remote. At this point, release the button on your original remote. The universal remote's light will then start flashing faster. This is the critical moment to activate the original remote's transfer mode.
   • For FAAC remotes: Simultaneously press buttons 1 and 2 on the original remote, then press the specific button (e.g., button 1) you intend to copy.
   • For Sommer remotes: Access the control unit and press its signal button.
4. Save the Signal: While the original remote is transmitting in transfer mode, bring the soleilx universal remote close to the signal-emitting source (either the original remote or the control unit). The flashing frequency of the soleilx remote will increase further. Now, press the desired button (1, 2, 3, or 4) on the soleilx remote where you want to save the signal.

Repeat this procedure for each button you wish to program or for additional remote controls. This allows you to consolidate multiple remotes into a single soleilx unit.

QR codes provided for accessing detailed instructions in Italian and French, along with a video guide for FAAC 433-868 MHz programming.
French Instructions: Download French Instructions

A detailed table listing compatible remote control brands and models, including fixed and rolling codes across multiple frequencies.
Compatibility List: Download Compatibility List

4. Operating Instructions

Once programmed, the soleilx Universal Remote Control operates simply:

• Press the specific button (1, 2, 3, or 4) that has been programmed to your desired device (gate, garage door, etc.).
• The device should respond within its operating range.
• The typical operating range is 10 to 30 meters in ideal, open-air conditions without significant obstructions.

An image illustrating the universal remote control being used to operate various devices such as gates, car systems, lighting, industrial equipment, stage effects, and water pumps.

5. Maintenance

Battery Replacement:

The remote control uses one CR2032 Lithium Cell 3V battery, which is included. To replace the battery:

1. Carefully open the remote control casing.
2. Remove the old CR2032 battery.
3. Insert a new CR2032 battery, ensuring correct polarity (+/-).
4. Close the remote control casing securely.

Cleaning:

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Water Resistance:

The remote control is water-resistant, designed to withstand splashes and light exposure to moisture. However, it is not fully waterproof and should not be submerged in water.

The remote control being splashed with water, illustrating its water-resistant design.

6. Troubleshooting

• Remote not responding:
  • Check if the battery needs replacement.
  • Ensure you are within the effective operating range (10-30 meters) and there are no significant physical obstructions.
  • Re-attempt the programming procedure as described in Section 3.
• Programming failure:
  • Carefully review and follow each step of the programming instructions.
  • Verify that your original remote control is transmitting correctly.
  • Consult the provided compatibility list to ensure your original remote's model is supported.
  • Ensure the original remote is held very close (within 3 cm) to the soleilx remote during the duplication process.
• Reduced operating range:
  • Replace the battery with a fresh CR2032.
  • Ensure there are no new obstructions (e.g., metal structures, thick walls) between the remote and the receiver.
  • Environmental interference can affect range; try operating from a different location.

7. Specifications

An illustration showing the remote control's four buttons, each capable of supporting frequencies from 280 MHz to 900 MHz.

8. Warranty and Support

Warranty:

Information regarding spare parts availability is 1 year. For specific warranty terms and conditions, please refer to your retailer or the point of purchase.

Manufacturer:

Jony Le

Customer Support:

For further assistance, detailed instructions, or to access the full compatibility list, please refer to the QR codes provided in Section 3 or contact soleilx customer support through your retailer.