1. Introduction
This manual provides essential instructions for the safe and correct assembly, use, and maintenance of your Stokke Tripp Trapp Baby Set 2. This Baby Set is designed to convert your Tripp Trapp Chair into a comfortable and secure high chair for children aged approximately 6 to 36 months, or until they can sit independently.
Please read all instructions carefully before assembly and retain this manual for future reference.
2. Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Always use the Tripp Trapp Baby Set with the Tripp Trapp Chair.
- Never leave your child unattended in the high chair.
- Always use the included 5-point harness to secure your child. Ensure the harness is properly adjusted and snug.
- Ensure the Baby Set is correctly and securely attached to the Tripp Trapp Chair before placing your child in it.
- Keep children away from the product during assembly.
- Do not use the product if any parts are broken, torn, or missing.
- Do not use accessories or replacement parts other than those approved by Stokke.
- Regularly check all fittings and components for wear and tear. Tighten as necessary.
- The Tripp Trapp Chair with Baby Set is intended for children who can sit unaided, typically from 6 months, up to 36 months or a maximum weight of 33 lbs (15 kg).
3. What's Included
Verify that all components are present before beginning assembly. The Stokke Tripp Trapp Baby Set 2 package includes the following items:
- Baby Set backrest
- Baby Set rail
- Extended gliders (2 pieces)
- Tripp Trapp® Harness (5-point)
Image: Components of the Stokke Tripp Trapp Baby Set 2. This diagram illustrates the Baby Set backrest (1), Baby Set rail (2), Extended gliders (3), and the Tripp Trapp® Harness (4).
4. Assembly Instructions
The Baby Set 2 is designed for tool-free assembly onto your Tripp Trapp Chair. Ensure your Tripp Trapp Chair is assembled according to its own instruction manual before attaching the Baby Set.
- Prepare the Chair: Ensure the Tripp Trapp Chair's seat plate and footrest are adjusted to the appropriate height for your child's age and size. The Baby Set requires the seat plate to be positioned correctly for optimal support.
- Attach the Backrest: Slide the Baby Set backrest onto the back of the Tripp Trapp Chair's seat plate. It should click securely into place.
- Install the Rail: Position the Baby Set rail over the front edge of the seat plate, aligning the slots with the chair's uprights. Push down firmly until it clicks into place on both sides.
- Thread the Harness: The Tripp Trapp Harness 2 features new notches on the back of the Baby Set backrest for easier threading. Thread the harness straps through the designated slots in the backrest and rail, ensuring they are not twisted.
- Attach Extended Gliders: For enhanced stability, attach the extended gliders to the bottom of the Tripp Trapp Chair's legs. These gliders help prevent the chair from tipping backward.
Image: The Stokke Tripp Trapp Baby Set 2, shown installed on a Tripp Trapp Chair. This image demonstrates the correct positioning of the Baby Set components on the chair.
Image: Detail view of the Baby Set 2, illustrating its soft, easy-to-clean textile, quick-release button, and tool-free assembly. The chair is sold separately.
5. Using the Baby Set
The Baby Set provides essential support and safety for your child during meal times and other activities at the table.
- Placing Your Child: Gently place your child into the Baby Set, ensuring their back is against the backrest and their legs are comfortably positioned.
- Securing the Harness: Fasten the 5-point harness. Adjust the straps to ensure a snug fit around your child's shoulders, waist, and between their legs. The harness should be tight enough so that your child cannot slip out, but not so tight as to cause discomfort.
- Adjusting the Chair: Ensure the Tripp Trapp Chair's seat plate and footrest are adjusted so your child's feet are supported and their hips are at a 90-degree angle, promoting optimal ergonomics and comfort.
- Removing Your Child: To remove your child, unfasten the harness using the quick-release button.
Image: A baby seated in the Tripp Trapp Chair with the Baby Set 2, demonstrating the product's features. The image highlights the 5-point safety harness, back and side support, optimal 90-degree ergonomic angle, and spacious leg room for comfort.
6. Care and Maintenance
Proper care ensures the longevity and hygiene of your Baby Set 2.
- Cleaning the Baby Set: The plastic components of the Baby Set can be wiped clean with a damp cloth and mild soap. Avoid abrasive cleaners.
- Cleaning the Harness: The harness can be removed and hand-washed with mild soap and water. Allow it to air dry completely before reattaching.
- Storage: When not in use, store the Baby Set in a clean, dry place away from direct sunlight and extreme temperatures.
- Inspections: Periodically inspect all parts for damage, wear, or loose connections. Replace any damaged parts immediately with genuine Stokke replacement parts.
7. Troubleshooting
If you encounter issues with your Baby Set 2, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Baby Set does not fit securely on the chair. | Incorrect positioning or obstruction. | Ensure the seat plate is at the correct height for Baby Set installation. Verify that all clips are aligned and pushed down firmly until they click into place. Check for any debris obstructing the connection points. |
| Harness is difficult to adjust or fasten. | Straps are twisted or mechanism is obstructed. | Untwist all harness straps. Ensure the quick-release button is clear of any obstructions. Refer to the harness threading instructions in Section 4. |
| Chair feels unstable with Baby Set. | Extended gliders not installed or chair not on a flat surface. | Ensure the extended gliders are properly attached to the chair legs. Always use the chair on a flat, stable surface. |
8. Specifications
- Brand: Stokke
- Model Number: 650101
- Color: Natural
- Material Type: Plastic (for Baby Set components), Wood (for Tripp Trapp Chair, sold separately)
- Item Weight: Approximately 1.3 pounds (0.59 kg)
- Package Dimensions: 16.73 x 10.91 x 7.76 inches (42.5 x 27.7 x 19.7 cm)
- Age Range (Description): Baby, Toddler, Infant (6-36 months)
- Maximum Weight Recommendation: 33 pounds (15 kg) for Baby Set use; Tripp Trapp Chair supports up to 300 pounds (136 kg).
- Portability: Yes (Baby Set can be easily removed for storage or transport)
9. Warranty Information
Stokke products are designed for quality and durability. For detailed information regarding the warranty for your Tripp Trapp Baby Set 2, please refer to the warranty card included with your purchase or visit the official Stokke website. Warranty terms and conditions may vary by region.
10. Customer Support
If you have any questions, require assistance with assembly, or need to order replacement parts, please contact Stokke customer support:
- Website: Visit www.stokke.com for FAQs, product registration, and contact information.
- Contact Form: Available on the Stokke website for direct inquiries.
- Local Retailer: Your authorized Stokke retailer can also provide support and service.