Midea SCK-3Q60B 6L Warm & Cool Mist Ultrasonic Humidifier User Manual

1. Important Safety Instructions

Please read and save these instructions before operating your humidifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always place the humidifier on a firm, flat, water-resistant surface at least 12 inches (30 cm) away from walls and appliances.
• Do not immerse the humidifier base in water or other liquids.
• Unplug the appliance during filling, cleaning, and when not in use.
• Do not operate the humidifier with a damaged cord or plug.
• Use only clean, cool tap water, or preferably distilled/filtered water. Do not use hot water.
• Do not add essential oils directly into the water tank. Use the dedicated essential oil tray.
• Keep out of reach of children and pets.
• Do not block air inlets or outlets.

2. Product Overview

Familiarize yourself with the components and controls of your Midea SCK-3Q60B Humidifier.

Figure 2.1: Front view of the Midea SCK-3Q60B Humidifier, highlighting the digital control panel and water tank. The display shows the current humidity level.

Figure 2.2: Detailed view of the humidifier's intuitive touch control panel, displaying all function icons and the digital humidity readout.

2.1 Components

• Water Tank: Transparent tank for water storage.
• Base Unit: Contains the ultrasonic transducer, fan, and control electronics.
• Mist Nozzle: Directs mist output.
• Control Panel: Touch-sensitive interface with digital display.
• Essential Oil Tray: Small compartment for adding essential oils.
• Cleaning Brush: Included for maintenance.

2.2 Control Panel Functions

• Timer Button: Sets operating time (0/1/2/4/8 hours).
• Auto Button: Activates Smart Humidity Control to maintain a set humidity level.
• Humidity Button: Adjusts target humidity level in Auto Mode.
• Dimmer Button: Controls the brightness of the display and night light.
• On/Off Button: Powers the unit on or off.
• Warm Mist Button: Toggles warm mist function.
• Digital Display: Shows current humidity, timer settings, and other indicators.

3. Setup

Follow these steps for initial setup of your humidifier.

Figure 3.1: The Midea SCK-3Q60B Humidifier in operation, releasing a fine mist. This image illustrates the unit's compact size and how it appears in a typical home setting.

1. Unpack: Carefully remove the humidifier from its packaging. Retain packaging for future storage.
2. Placement: Place the humidifier on a flat, stable, water-resistant surface. Ensure it is at least 12 inches (30 cm) away from walls, furniture, and electronic devices. Do not place it on carpet or near heat sources.
3. Fill Water Tank:
   • Remove the top cover of the humidifier.
   • Pour clean, cool tap water into the tank. For best performance and to reduce mineral buildup, distilled or filtered water is recommended. Do not exceed the maximum fill line.
   • Replace the top cover securely.
   

   Figure 3.2: Illustration of the easy top-fill design, showing water being poured directly into the humidifier's water tank from above.

4. Connect Power: Plug the power cord into a standard 120V~ 60Hz electrical outlet. The unit will beep once, and the display will briefly illuminate.

4. Operating Instructions

Learn how to use the various functions of your Midea humidifier.

4.1 Power On/Off and Mist Level

• Press the On/Off button to turn the humidifier on. It will start operating at the default mist level.
• Press the On/Off button repeatedly to cycle through 3 mist levels (Low, Medium, High).
• Press and hold the On/Off button for 2 seconds to turn the humidifier off.

4.2 Warm Mist Function

• Press the Warm Mist button to activate the warm mist function. The warm mist indicator will illuminate on the display.
• Press the Warm Mist button again to turn off the warm mist function.
• Note: It may take several minutes for the warm mist to reach its full temperature.

Figure 4.1: A visual representation highlighting the dual warm and cool mist capabilities of the humidifier, indicating its suitability for different seasonal needs.

4.3 Smart Humidity Control (Auto Mode)

• Press the Auto button to activate Auto Mode. The humidifier will automatically adjust mist output to maintain a comfortable humidity level (default 55% RH).
• To set a target humidity, press the Humidity button while in Auto Mode. Each press will increase the target humidity by 5% (from 40% to 90% RH). The humidifier will stop misting once the target humidity is reached and resume when it drops below the target.
• Press the Auto button again to exit Auto Mode.

4.4 Timer Function

• Press the Timer button to set an operating duration. Each press cycles through 0, 1, 2, 4, and 8 hours.
• The humidifier will automatically turn off once the set time has elapsed.
• To cancel the timer, cycle through the options until '0' hours is displayed.

4.5 Night Light

• Press the Dimmer button to turn on the night light.
• Press the Dimmer button repeatedly to cycle through 3 color options (e.g., blue, green, red) or turn it off.

Figure 4.2: This image demonstrates the humidifier's integrated 3-color night light feature, showing the unit illuminated with blue and red ambient lighting.

4.6 Essential Oil Tray

• Locate the essential oil tray on the side or back of the humidifier base.
• Pull out the tray and add a few drops of your preferred essential oil onto the aroma pad.
• Slide the tray back into place. The mist will carry the fragrance into the air.
• Caution: Do not add essential oils directly into the water tank, as this can damage the unit and void the warranty.

5. Maintenance

Regular cleaning is essential for optimal performance and hygiene.

5.1 Daily Maintenance

• Unplug the humidifier before refilling.
• Empty any remaining water from the tank and base.
• Wipe the tank and base dry with a clean cloth.

5.2 Weekly Cleaning

• Unplug the unit.
• Clean the Water Tank: Remove the top cover and tank. Wipe the inside of the tank with a soft cloth. For mineral buildup, fill the tank with a mixture of 1 teaspoon of white vinegar and 1 gallon of water. Let it stand for 30 minutes, then rinse thoroughly.
• Clean the Base Unit: Carefully pour out any water from the base. Add 1/2 cup of white vinegar to the base and let it soak for 30 minutes. Use the included cleaning brush to gently clean the ultrasonic transducer (the small disc) and heating element (for warm mist). Do not scrub aggressively. Rinse the base thoroughly under tap water, ensuring no water enters the air outlet.
• Clean the Essential Oil Tray: Remove the aroma pad and wash it with mild soap and water. Rinse and dry completely before reinserting.
• Dry all parts completely before reassembling.

5.3 Storage

• Before storing, perform a thorough cleaning as described in Section 5.2.
• Ensure all parts are completely dry.
• Store the humidifier in its original packaging in a cool, dry place.

6. Troubleshooting

Refer to this section for common issues and their solutions.

7. Specifications

8. Warranty and Support

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Midea Customer Support. Contact information can typically be found on the Midea official website or on your product packaging.