Jonsbo TK-3 BLACK

Download PDF
Contents

JONSBO TK-3 Black ATX Mid Tower PC Case User Manual

Model: TK-3 BLACK | Brand: Jonsbo

1. Introduction

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your JONSBO TK-3 Black ATX Mid Tower PC Case. Please read this manual thoroughly before beginning installation to ensure proper assembly and optimal performance.

JONSBO TK-3 Black ATX Mid Tower PC Case with internal components illuminated

Figure 1.1: Fully assembled JONSBO TK-3 Black ATX Mid Tower PC Case showcasing internal components and lighting.

2. Product Features

  • One-piece Curved Glass Design: Features a 270-degree side view display with a column-less design for full hardware visibility. Ensure the explosion-proof film is not torn off the curved glass.
  • High Compatibility: Supports ATX, Micro-ATX, and ITX motherboards, including back-plane (BTF) motherboards for cleaner cable routing. Accommodates 40-series GPUs and ATX PSUs.
  • Advanced Cooling System: Supports dual 360mm All-In-One (AIO) liquid coolers (top/bottom) and up to 10 fan positions for efficient heat dissipation. Vertical upward airflow path prevents heat accumulation.
  • Spacious Interior: Maximum CPU cooler height of 165mm (6.49 inches) and maximum GPU length of 420mm (16.53 inches).
  • Flexible Storage Options: Provides drive bays for 2.5-inch SSDs (x2) and 3.5-inch HDDs (x1), or 3.5-inch HDDs (x2) and 2.5-inch SSDs (x1).
  • Front I/O Ports: Includes 1x USB 3.2 Gen2 Type-C port and 2x USB 3.0 ports for convenient connectivity.
JONSBO TK-3 PC Case with its curved glass panel detached

Figure 2.1: The one-piece curved glass panel detached from the JONSBO TK-3 case, highlighting its design.

Internal view of JONSBO TK-3 PC Case showing motherboard mounting points for BTF motherboards

Figure 2.2: Internal layout of the JONSBO TK-3 case, illustrating support for BTF (Back-plug) motherboards.

JONSBO TK-3 PC Case with fan and AIO liquid cooling support highlighted

Figure 2.3: Diagram showing the extensive fan and AIO liquid cooling support within the JONSBO TK-3 case.

3. Specifications

FeatureSpecification
Product Dimensions (W x D x H)288mm x 438mm x 415mm (11.34 x 17.24 x 16.34 inches) (Included the foot)
Material0.7mm Steel, Tempered Glass
Motherboard CompatibilityITX, M-ATX, ATX (Back-plug support)
Max. CPU Cooler Height165mm (6.49 inches)
Max. GPU Length420mm (16.53 inches)
PSU SupportATX, up to 220mm (8.66 inches)
Drive Bays2.5" SSD x2 + 3.5" HDD x1 OR 3.5" HDD x2 + 2.5" SSD x1
Fan PositionsTop: 3x120mm/2x140mm (Optional)
Bottom: 3x120mm (Optional)
MB Side: 3x120mm (Optional)
Rear: 1x120mm (Optional)
AIO Radiator SupportTop: 360mm or 280mm (Optional)
Bottom: 360mm (Optional)
Front I/O Ports1x USB 3.2 Gen2 Type-C, 2x USB 3.0, Audio/Mic (2-in-1)
PCI Expansion Slots7
Item Weight16.09 pounds (7.3 KG)

4. Setup Guide

4.1 Component Installation Overview

The JONSBO TK-3 case is designed for ease of assembly. Follow these general steps for installing your PC components:

  1. Prepare the Case: Carefully remove the curved glass panel by unscrewing the thumb screws. Place the case on a stable, flat surface.
  2. Install Motherboard: Mount your ATX, Micro-ATX, or ITX motherboard onto the standoffs. For BTF motherboards, utilize the dedicated back-plug mounting points for a cleaner internal aesthetic.
  3. Install CPU Cooler: Install your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
  4. Install Graphics Card (GPU): Insert your graphics card into the PCI-E slot. The case supports GPUs up to 420mm in length.
  5. Install Power Supply (PSU): Mount your ATX power supply in its designated location. The case supports PSUs up to 220mm in length.
  6. Install Storage Drives: Secure your 2.5-inch SSDs and/or 3.5-inch HDDs in the available drive bays.
  7. Cable Management: Utilize the ample space behind the motherboard tray for routing and managing cables, especially with BTF motherboards.
  8. Install Fans/AIO: Install any additional case fans or AIO liquid cooling radiators in their respective positions.
  9. Connect Front I/O: Connect the front panel cables (USB 3.2 Type-C, USB 3.0, Audio) to your motherboard.
  10. Close the Case: Reattach the curved glass panel and secure it with the thumb screws.
JONSBO TK-3 PC Case showing internal drive bay locations and cable routing space

Figure 4.1: Internal view demonstrating drive bay installation and potential cable management routes.

Empty JONSBO TK-3 PC Case from an angled view

Figure 4.2: An empty JONSBO TK-3 PC case, providing a clear view of its internal structure before component installation.

5. Operating Considerations

5.1 Airflow and Cooling

The JONSBO TK-3 case is designed with multiple fan positions and AIO support to ensure optimal airflow and cooling performance. The vertical upward airflow path helps prevent heat accumulation within the chassis.

  • Ensure all fan positions are utilized for best cooling, especially for high-performance components.
  • Regularly check fan operation and ensure no obstructions block airflow.

5.2 Cable Management

Effective cable management is crucial for both aesthetics and airflow. The case provides dedicated space behind the motherboard tray for routing cables. For BTF motherboards, the back-plug design significantly simplifies cable routing, leading to a cleaner main chamber.

Video 5.1: An overview of the JONSBO TK-3 ATX PC Case, demonstrating its features and internal layout, including cooling and cable management capabilities.

6. Maintenance

Regular maintenance helps prolong the life of your PC components and ensures optimal performance.

  • Dust Cleaning: Periodically clean dust filters and internal components using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
  • Glass Panel Care: Clean the curved glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the surface or coatings.
  • Cable Check: Occasionally inspect internal cables to ensure they are securely connected and not obstructing airflow.

7. Troubleshooting

If you encounter issues with your PC build within the JONSBO TK-3 case, consider the following common troubleshooting steps:

  • No Power: Double-check all power connections from the PSU to the motherboard, CPU, GPU, and storage drives. Ensure the front panel power switch is correctly connected to the motherboard.
  • Overheating: Verify that all fans are spinning correctly and are oriented for proper airflow (intake/exhaust). Ensure CPU cooler and GPU heatsinks are free of dust. Check thermal paste application on the CPU.
  • Component Fit Issues: If a component does not fit, re-check the specifications section for maximum supported dimensions (e.g., GPU length, CPU cooler height, PSU length).
  • Front Panel I/O Not Working: Confirm that the front panel USB and audio cables are correctly plugged into the corresponding headers on your motherboard.
  • Noise: Identify the source of the noise. It could be a loose fan, a vibrating panel, or a component making contact with the case. Ensure all screws are tightened.

8. Warranty and Support

For warranty information and technical support, please refer to the official Jonsbo website or contact your retailer. Keep your proof of purchase for warranty claims.

Official Jonsbo Store: Jonsbo Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.