UPBRIGHT SodaStream PWR-001 Power Supply

UpBright 6.5V AC/DC Adapter User Manual

Model: SodaStream PWR-001 Power Supply

Product Overview

This manual provides essential information for the safe and efficient use of your UpBright 6.5V AC/DC Adapter, designed for compatibility with SodaStream PWR-001 and similar electric sparkling water makers. Please read this manual thoroughly before use.

UpBright 6.5V AC/DC Adapter

Figure 1: Front view of the UpBright 6.5V AC/DC Adapter, showing the main unit with the UpBright logo, specifications label, and the attached power cord with a barrel round connector.

Setup Instructions

  1. Unpack the Adapter: Carefully remove the AC/DC adapter from its packaging. Ensure all components are present.
  2. Check Compatibility: Verify that the device you intend to power (e.g., SodaStream PWR-001) requires a 6.5V DC input with a 2A current rating and a barrel round connector. This adapter provides 6.5VDC at 2000mA.
  3. Connect to Device: Insert the barrel round connector of the adapter's output cable firmly into the power input port of your compatible device.
  4. Connect to Power Outlet: Plug the AC input prongs of the adapter into a standard wall power outlet. This adapter supports a wide input voltage range of 100-240VAC, 50/60Hz, making it suitable for worldwide use.
  5. Power On Device: Once connected, power on your device according to its own operating instructions.
Side view of UpBright AC/DC Adapter

Figure 2: Side view of the UpBright 6.5V AC/DC Adapter, illustrating its compact design and the attached power cord.

For international orders, a suitable outlet adapter (AU, EU, or UK type) may be included to fit your country's power sockets. Always ensure the correct adapter is used for your region.

International outlet adapters and warranty certificate

Figure 3: Image showing various international outlet adapters (AU, EU, UK) that may be provided with the product for international compatibility, alongside a sample warranty certificate.

Operating Instructions

The UpBright 6.5V AC/DC Adapter functions as a reliable power source for compatible electronic devices. Once properly connected to both the device and a power outlet, it will supply the necessary 6.5V DC power.

  • Ensure the adapter is placed in a well-ventilated area to prevent overheating.
  • Do not cover the adapter during operation.
  • Disconnect the adapter from the power outlet when not in use for extended periods.

Maintenance and Care

Proper maintenance ensures the longevity and safe operation of your adapter.

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the adapter or subjecting it to strong impacts. Do not bend or crimp the power cord excessively.
  • Moisture: Keep the adapter away from water and other liquids. Do not operate in damp or wet conditions.

Troubleshooting

If you encounter issues with your UpBright AC/DC Adapter, please refer to the following common solutions:

ProblemPossible CauseSolution
Device not powering on.Adapter not properly connected to power outlet or device.Ensure all connections are secure and fully inserted. Try a different power outlet.
Device not powering on.Power outlet is not active.Test the power outlet with another known working appliance.
Adapter feels unusually hot.Poor ventilation or excessive load.Ensure the adapter is in a well-ventilated area. Disconnect and allow to cool. Verify the device's power requirements do not exceed the adapter's capacity (6.5V 2A).
Intermittent power supply.Damaged cable or connector.Inspect the cable and connector for any visible damage. If damaged, discontinue use and replace the adapter.

This adapter features built-in safety protections: OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection). These features help protect both the adapter and your connected device from electrical damage.

Specifications

FeatureDetail
Model NumberSodaStream PWR-001 Power Supply
Input Voltage100-240VAC, 50/60Hz (Worldwide Input)
Output Voltage6.5V DC
Output Current2A (2000mA)
Wattage10 Watts
Connector TypeBarrel Round Connector
Compatible DevicesSodaStream PWR-001, PWR001 Soda Stream Power Source Electric Soda Sparkling Water Maker, Helms-Man SEI0652000PU, SEI 065 2000V, SEI0652000V
Product Dimensions4 x 3 x 2 inches
Item Weight4 ounces
Safety FeaturesOVP, OCP, SCP Protection

Warranty Information

UpBright products are designed for reliability and performance. This product comes with a limited warranty to ensure your satisfaction.

  • Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
  • Exchange Policy: A 24-month exchange policy is provided for units found to be defective under normal use.

For detailed terms and conditions, please refer to the warranty certificate included with your product or contact UpBright customer support.

Customer Support

For further assistance, technical support, or warranty claims, please contact UpBright customer service. You can find more information and contact details by visiting the official UpBright store:

Visit the UPBRIGHT Store

© 2024 UpBright. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.