Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Havit Gamenote GK50 Pro RGB Gaming Microphone. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
Package Contents
Verify that all items listed below are included in your package:
- Havit Gamenote GK50 Pro RGB Microphone
- Desk Stand
- USB Connection Cable
- User Manual (this document)
Product Overview
Key Features
- Signal-to-Noise Ratio: 110dB ±3dB
- Frequency Response: 30 Hz - 20000 Hz
- Polar Pattern: Cardioid (Unidirectional) for focused sound capture
- Integrated Table Stand and Pop Filter
- Environmental Noise Cancelling technology
- RGB Lighting Effects
- USB Connectivity for plug-and-play operation
Microphone Components
Familiarize yourself with the various parts of your Havit Gamenote GK50 Pro microphone:
- Microphone Capsule: The primary sound-capturing element.
- Pop Filter: Integrated mesh screen to reduce plosive sounds.
- RGB Lighting: Customizable lighting effects on the microphone body.
- Microphone Mount: Connects the microphone to the stand.
- Desk Stand: Provides stable support for the microphone on a flat surface.
- USB Port: Located at the bottom or rear of the microphone for connection to a computer.
Setup Instructions
1. Assembling the Desk Stand
- Unpack all components from the box.
- Attach the microphone mount to the top of the desk stand pole. Ensure it is securely tightened.
- Carefully screw the Havit Gamenote GK50 Pro microphone onto the microphone mount. Adjust the angle as needed.
2. Connecting to Your Computer
- Locate the USB port on the Havit Gamenote GK50 Pro microphone.
- Connect one end of the provided USB cable to the microphone's USB port.
- Connect the other end of the USB cable to an available USB port on your computer.
- Your computer should automatically detect and install the necessary drivers. This is typically a plug-and-play process.
- Verify the microphone is recognized in your operating system's sound settings (e.g., Windows Sound Control Panel, macOS Sound Preferences). Select "Havit Gamenote GK50 Pro" as the input device.
Operating Instructions
1. Microphone Positioning
For optimal sound quality, position the microphone approximately 6-12 inches (15-30 cm) from your mouth. Ensure you are speaking directly into the front of the microphone, where the RGB lighting and pop filter are located, as it features a cardioid (unidirectional) polar pattern.
2. Adjusting Microphone Gain (Software)
The Havit Gamenote GK50 Pro microphone's input level (gain) can be adjusted through your computer's operating system settings or within your recording/streaming software. Adjust the gain to prevent audio clipping (distortion) while ensuring your voice is clear and audible.
3. RGB Lighting Control
The microphone features integrated RGB lighting. Specific controls for changing lighting modes or colors may be available through dedicated software (if provided by Havit) or via a physical button on the microphone itself (refer to product specifications for button location, if any). If no specific controls are mentioned, the lighting may cycle automatically or be static.
4. Environmental Noise Cancelling
The Havit Gamenote GK50 Pro incorporates environmental noise cancelling technology. This feature works automatically to reduce background noise, enhancing the clarity of your voice. Ensure your recording environment is as quiet as possible for the best results.
Maintenance
Cleaning
- Gently wipe the microphone body and stand with a soft, dry cloth.
- Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the microphone's finish or internal components.
- Avoid getting moisture into the microphone grille or USB port.
Storage
When not in use, store the microphone in a clean, dry environment, away from extreme temperatures and direct sunlight. If transporting, consider using a protective case to prevent damage.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphone |
|
|
| Poor sound quality / Distortion |
|
|
| RGB lighting not working |
|
|
Specifications
Technical Specifications
| Feature | Detail |
|---|---|
| Brand | Havit |
| Model Number | GK50Pro |
| Connectivity Technology | USB |
| Connector Type | USB |
| Polar Pattern | Unidirectional (Cardioid) |
| Frequency Response | 30 Hz - 20000 Hz |
| Signal-to-Noise Ratio | 110dB ±3dB |
| Special Features | Integrated Stand, Pop Filter, Environmental Noise Cancelling, RGB Lighting |
| Compatible Devices | Personal Computer, Tablet |
| Recommended Uses | Streaming |
| Microphone Form Factor | Table Array |
| Item Weight | 1.16 Kilograms |
| Package Dimensions | 43.1 x 18.1 x 9.3 cm |
Warranty and Support
Havit products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Havit website. Keep your proof of purchase for warranty claims.
For further assistance, you may contact Havit customer support through their official channels.
