1. Introduction
Thank you for purchasing the towild Urban Mini Bicycle Headlight Set. This manual provides detailed instructions for the safe and efficient use of your new bicycle light. Designed for night riding, this compact and powerful headlight offers 500 lumens of brightness, USB-C recharging, and a waterproof design, with specific compatibility for Brompton bicycles.
2. Package Contents
Please verify that all items listed below are included in your package:
- Urban Mini Headlight Unit
- Wireless Remote Control
- Brompton-specific Front Mount
- Standard Fork Mount
- Mounting Hardware (screws, gaskets, nuts)
- USB-C Charging Cable
- User Manual
This image displays all items included in the package: the Urban Mini headlight, a wireless remote control, a Brompton-specific front mount, a standard fork mount, mounting hardware (screws, gaskets, nuts), a USB-C charging cable, and the user manual.
3. Setup and Installation
3.1. Mounting the Headlight
The Urban Mini headlight offers two primary mounting options: a Brompton-specific front mount and a general fork mount. Choose the appropriate mount for your bicycle.
- Identify Mount Type: Determine if you are using the Brompton-specific mount or the standard fork mount.
- Attach Mount: Secure the chosen mount to your bicycle's front fork using the provided screws, gaskets, and nuts. Ensure it is tightened firmly to prevent movement during riding.
- Attach Headlight: Slide the Urban Mini headlight onto the mount until it clicks securely into place. Verify that the light is stable and facing forward.
This diagram illustrates the two primary mounting methods. The left side shows installation for Brompton bicycles, detailing the screw, gasket, and nut assembly. The right side shows a general fork mount installation with similar components.
The Urban Mini headlight is shown securely mounted on the front fork of a bicycle, demonstrating its compact design and how it integrates with the bike's aesthetics.
3.2. Remote Control Pairing
The remote control allows for convenient operation of the headlight. To pair the remote with the headlight:
- Ensure the headlight is turned OFF.
- Press and hold the main power button on the headlight for approximately 5 seconds until the indicator light flashes rapidly. This indicates pairing mode.
- While the headlight is in pairing mode, press any button on the remote control. The headlight's indicator light will stop flashing and remain solid for a few seconds, confirming successful pairing.
- Test the remote control by pressing its buttons to change modes or turn the light on/off.
If pairing fails, repeat the steps. Ensure the remote control's battery is functional.
This image features two circular insets: the top one shows the wireless remote control with its power and mode buttons, and the bottom one shows the Urban Mini headlight itself, emphasizing its design and lens.
4. Operating Instructions
The Urban Mini headlight features multiple lighting modes for various riding conditions. It can be operated directly via the button on the light or through the paired wireless remote control.
4.1. Power On/Off
- To Turn On: Press and hold the power button on the headlight or the power button on the remote control for 1-2 seconds.
- To Turn Off: Press and hold the power button on the headlight or the power button on the remote control for 1-2 seconds.
4.2. Changing Light Modes
Once the light is on, short press the power button on the headlight or the mode button on the remote control to cycle through the available modes:
- High: 500 Lumens (approx. 1 hour 3 minutes runtime)
- Medium: 200 Lumens (approx. 3 hours 20 minutes runtime)
- Low: 100 Lumens (approx. 6 hours 30 minutes runtime)
- Night Warning: 200 Lumens (approx. 7 hours runtime)
- Day Warning: 400 Lumens (approx. 8 hours runtime)
- Turbo: 800 Lumens (available only when using the remote control)
This chart provides a comprehensive overview of the Urban Mini's lighting modes. It lists High (500LM, 1h3min), Medium (200LM, 3h20min), Low (100LM, 6h30min), Night warning (200LM, 7h), Day warning (400LM, 8h), and Turbo (800LM, remote only) modes, along with their respective lumen outputs and approximate runtimes.
5. Charging
The Urban Mini headlight is equipped with a USB-C charging port for convenient recharging.
- Locate the USB-C charging port on the headlight. It is typically covered by a rubber flap to ensure waterproofing.
- Open the rubber flap and insert the provided USB-C cable into the port.
- Connect the other end of the USB-C cable to a USB power source (e.g., computer, wall adapter, power bank).
- The indicator light on the headlight will show charging status (e.g., red for charging, green for fully charged).
- Once fully charged, disconnect the cable and securely close the rubber flap to maintain waterproofing.
Note: For optimal battery life, avoid completely draining the battery before recharging. Charge the device regularly, especially if it has not been used for an extended period.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your headlight.
- Cleaning: Wipe the light unit and remote control with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components.
- Waterproofing: Always ensure the USB-C charging port's rubber flap is securely closed when not charging to maintain its IPX6 waterproof rating.
- Storage: Store the headlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50% every few months to prevent deep discharge.
- Battery Care: The integrated battery is not user-replaceable. Do not attempt to open the unit.
7. Troubleshooting
If you encounter issues with your towild Urban Mini headlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the headlight using the USB-C cable. |
| Light turns on but remote does not work. | Remote is not paired or remote battery is low. | Re-pair the remote control (refer to Section 3.2). Check or replace the remote control battery if applicable. |
| Light output is dim. | Battery is low or lens is dirty. | Charge the headlight. Clean the lens with a soft cloth. |
| Light flickers or shuts off unexpectedly. | Loose connection or low battery. | Ensure the light is securely mounted. Charge the headlight. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | towild |
| Model Number | Urban Mini |
| Max Light Output | 500 Lumens (800 Lumens with remote Turbo mode) |
| Power Source | Battery Powered (USB-C Rechargeable) |
| Material | Aluminum |
| Color | Black |
| Waterproof Rating | IPX6 |
| Mounting Type | Handlebar Mount / Fork Mount |
| Installation Position | Front |
| Included Components | Out-front mount, Bike light, Remote control |
This technical drawing provides precise measurements for the light's mounting bracket, including length, width, and screw hole distances, essential for proper installation.
9. Safety Information
- Do not look directly into the light beam, as it can cause temporary vision impairment.
- Ensure the light is securely mounted before each ride to prevent it from falling off.
- Always comply with local regulations regarding bicycle lighting.
- Keep out of reach of children.
- Do not disassemble or modify the light unit. This may void the warranty and pose a safety risk.
- Use only the provided USB-C cable or a certified equivalent for charging.
10. Warranty and Support
The towild Urban Mini Bicycle Headlight Set comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly. If you require technical support or have questions not covered in this manual, please reach out to towild customer service through their official website or the retailer where you purchased the product.