GuliKit NS38

Download PDF
Contents

GuliKit KK3 PRO Wireless Game Controller Instruction Manual

Model: NS38

1. Introduction

This manual provides detailed instructions for the GuliKit KK3 PRO Wireless Game Controller. Please read this manual thoroughly before use to ensure proper operation and to maximize your gaming experience.

2. Package Contents

Verify that all items listed below are included in your package:

  • GuliKit KK3 PRO Game Controller
  • 1000HZ Hyperlink Wireless Adapter
  • 2 Metal Back Buttons (detachable)
  • Protection Case
  • USB-C to USB-A Cable
GuliKit KK3 PRO Game Controller and accessories
Image: The GuliKit KK3 PRO Game Controller, including the wireless adapter, metal back buttons, protection case, and USB-C cable.

3. Setup and Connection

3.1 Charging the Controller

Connect the controller to a power source using the provided USB-C to USB-A cable. The LED indicators will show charging status.

3.2 Connecting to Nintendo Switch / Switch Lite

The GuliKit KK3 PRO supports wireless connection to Nintendo Switch and Switch Lite.

  1. Set the controller to Switch mode.
  2. Hold the pairing button on the controller until the four pairing indicator lights flash in sequence.
  3. On your Nintendo Switch, navigate to the Controller settings and select "Change Grip/Order."
  4. The Switch will detect and pair with the controller.

3.3 Special Pairing Method for Switch 2 Wake-Up

To utilize the Switch 2 wake-up feature, ensure your controller's BT Firmware is updated to V5.03 or later from the official GuliKit website.

  1. Set the controller to Switch mode, then hold the pairing button to enter pairing mode.
  2. On Switch 2, enter the Controller → Change Grip/Order interface.
  3. After Switch 2 indicates successful controller pairing, detach either the left or right Joy-Con controller.
  4. Wait for Switch 2 to show that the Joy-Con controller has reconnected.
  5. Re-attach the Joy-Con controller to Switch 2 to complete this special pairing process.
Video: Demonstrates the special pairing method for the GuliKit KK3 PRO controller to enable the Switch 2 wake-up function.

3.4 Connecting to PC (Windows)

The controller supports both wired and wireless connections to PC.

  • Wired Connection: Connect the controller directly to your PC using the USB-C to USB-A cable. This enables a 1000Hz polling rate.
  • Wireless Connection (2.4G Hyperlink Adapter): Insert the provided "Hyperlink" 2.4G adapter into a USB port on your PC. The controller will automatically connect, offering a 1000Hz polling rate.
  • Bluetooth Connection: Enable Bluetooth on your PC and search for available devices. Select "GuliKit KK3 PRO" to pair.
GuliKit Hyperlink Adapter for 1000Hz polling rate
Image: The GuliKit Hyperlink adapter, which enables a 1000Hz wireless polling rate for super-fast response on Windows PC.
Comparison of 1000Hz polling rate via Hyperlink adapter versus 125Hz via Bluetooth
Image: Illustrates the difference between 1000Hz polling rate with the Hyperlink adapter (Super Response) and 125Hz with standard Bluetooth (Slow Response).

3.5 Connecting to Android/iOS/Steam Deck/macOS

The controller can connect wirelessly via Bluetooth to Android, iOS, Steam Deck, and macOS devices. Follow your device's standard Bluetooth pairing procedure after setting the controller to the appropriate mode.

4. Operating the Controller

4.1 Button Layout and Basic Controls

The GuliKit KK3 PRO features standard gaming controller buttons including A, B, X, Y, D-pad, Home, Plus, Minus, Capture, and two Hall Effect joysticks. It also includes two metal rear paddles for enhanced control.

4.2 Hall Effect Joysticks and Triggers

Equipped with new-generation Hall magnetic joysticks and analog triggers, the controller offers anti-stick drift performance and smooth, precise control. The joysticks provide high precision at level 2200 for delicate micro-control.

GuliKit KK3 PRO with Hall Effect Joysticks and Analog Triggers highlighted
Image: Close-up view of the GuliKit KK3 PRO controller highlighting the Hall Effect Joysticks and Hall Effect Analog Triggers.
GuliKit KK3 PRO joystick with high precision micro-control indication
Image: Illustrates the high precision at level 2200 of the GuliKit KK3 PRO joysticks, allowing for delicate micro-control.

4.3 Patented Maglev Vibration Motor

Experience immersive feedback with GuliKit's self-developed Maglev motor technology. It provides three vibration modes (HD rumble, Super Haptic, Rotor vibration) and two vibration strengths (weak, strong).

GuliKit KK3 PRO showing three vibration modes: HD Rumble, Maglev Super Haptic, Rotor Vibration
Image: Visual representation of the three distinct vibration modes offered by the GuliKit KK3 PRO controller: HD Rumble, Maglev Super Haptic, and Rotor Vibration.

4.4 Auto-Pilot Gaming (APG)

The Upgraded Auto-Pilot Gaming (APG) feature allows you to record any series of inputs up to 10 seconds and map them to the APG button for custom commands or macros. This feature is optimized for higher replay accuracy.

GuliKit KK3 PRO controller demonstrating Auto-Pilot Gaming (APG) feature
Image: The GuliKit KK3 PRO controller illustrating the Auto-Pilot Gaming (APG) function, which allows for recording and replaying input sequences.

4.5 Metal Rear Paddles

The controller includes two detachable metal rear paddles. These can be freely swapped and mapped to any face buttons, providing additional control options during gameplay.

Rear view of GuliKit KK3 PRO controller showing two metal back buttons
Image: Rear view of the GuliKit KK3 PRO controller, highlighting the two detachable metal back buttons.

4.6 Customization Settings

The KK3 PRO offers various on-the-fly customization options:

  • 6-Axis Gyro: Supports motion control for compatible games.
  • D-pad: Switch between 8-way and 4-way D-pad modes.
  • Joystick Sensitivity & Deadzone: Adjust joystick sensitivity and enable/disable deadzone.
  • Turbo Function: Enable rapid-fire for specific buttons.
  • Adjustable RGB Light: Customize the controller's RGB lighting.
  • Replaceable Key Caps & Stick Caps: The controller supports replaceable key caps (PC layout key caps not included) and replaceable stick caps (not included).
GuliKit KK3 PRO controller with six-axis gyroscope motion control arrows
Image: The GuliKit KK3 PRO controller demonstrating its six-axis gyroscope feature for immersive motion control.

5. Maintenance

To ensure the longevity and optimal performance of your GuliKit KK3 PRO controller, follow these maintenance guidelines:

  • Keep the controller clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Store the controller in its protective case when not in use to prevent dust and physical damage.
  • Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble the controller, as this may void the warranty and cause damage.

6. Troubleshooting

If you encounter issues with your GuliKit KK3 PRO controller, consider the following common solutions:

  • Pairing Issues: Ensure the controller is in the correct mode for your device (Switch, PC, Android, iOS). Re-attempt the pairing process as described in Section 3.
  • Connectivity Problems: For wireless connections, ensure the controller is within range of your device and there are no significant obstructions. For PC, try using the 2.4G Hyperlink adapter for a more stable connection.
  • Unresponsive Buttons/Joysticks: Ensure the controller is fully charged. If the issue persists, try resetting the controller (refer to the full manual for specific reset instructions if available).
  • Firmware Updates: Check the official GuliKit website for the latest firmware updates, especially for new features like Switch 2 wake-up. Updating firmware can resolve various performance issues.

For persistent issues, please refer to the official GuliKit support resources.

7. Specifications

FeatureDetail
Model NumberNS38
CompatibilitySwitch 2, Switch, Switch Lite, PC, Android, iOS, Steam Deck, macOS
Connection TypeBluetooth Wireless, 2.4G Wireless (via Hyperlink adapter), Wired (USB-C)
Polling Rate1000Hz (Wired PC, Wireless PC via Hyperlink adapter)
JoysticksHall Effect, Anti-stick drift, Level 2200 precision
TriggersHall Effect Analog
VibrationMaglev Motor (HD Rumble, Super Haptic, Rotor), 2 strengths
Special FeaturesAuto-Pilot Gaming (APG), 2 Metal Rear Paddles, 6-Axis Gyro, Turbo, Adjustable RGB Light, Switch 2 Wake-up
Battery950mAh Lithium Polymer (included)
Item Weight14.4 ounces
Package Dimensions6.18 x 5.98 x 2.83 inches

8. Warranty and Support

For warranty information, technical support, or to download the latest firmware and detailed user guides, please visit the official GuliKit website or contact their customer service directly. Keep your purchase receipt for warranty claims.

© 2025 GuliKit. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.