1. Introduction
Thank you for choosing the NEWFAST AC1200 Outdoor Dual-Band WiFi Repeater. This device is designed to extend your wireless network coverage in outdoor environments, providing stable and high-speed internet access. With its robust IP66 weatherproof design and multiple operating modes, it is an ideal solution for various outdoor networking needs, including gardens, farms, parks, schools, and commercial centers.
This manual will guide you through the installation, configuration, and operation of your NEWFAST AC1200 device, ensuring optimal performance and reliability.
2. Product Overview
2.1 Package Contents
- NEWFAST AC1200 Outdoor WiFi Repeater
- PoE Power Adapter (Injector)
- Mounting Accessories (Pole Straps, Wall Mount Screws)
- Quick Installation Guide
2.2 Device Components
This image illustrates the various ports and buttons on the NEWFAST AC1200 device, including the Reset button, DC power port, WAN port, and LAN ports.
- External Antennas: Two high-gain omnidirectional antennas for extended signal coverage.
- Reset Button: Used to restore factory default settings.
- DC Port: For direct power input (48V 0.32A).
- WAN Port (RJ45): 1 Gigabit Ethernet port for connecting to the internet source or main network.
- LAN Ports (RJ45): 2 Gigabit Ethernet ports for connecting wired devices.
- LED Indicators: Display power, WAN, LAN, and WiFi status.
2.3 Key Features
- AC1200 Dual-Band WiFi: Supports 802.11ac standard with speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz.
- IP66 Weatherproof Design: Robust casing protects against rain, dust, lightning, and extreme temperatures, suitable for all weather conditions.
- Power over Ethernet (PoE) Support: Simplifies installation by allowing power and data transmission over a single Ethernet cable.
- Multiple Operating Modes: Supports Router, Access Point (AP), Repeater, and Bridge modes for flexible deployment.
- High-Power Amplifiers: Integrated PAs and 2*5dBi antennas extend signal coverage up to 200 meters in open areas.
- Gigabit Ethernet Ports: Three 10/100/1000Mbps RJ45 ports for high-speed wired connections.
- Wide Compatibility: Compatible with various network devices such as routers, modems, and other WiFi access points.
3. Setup
3.1 Physical Installation
The NEWFAST AC1200 can be mounted on a pole or directly on a wall, offering flexible deployment options.
This image demonstrates the flexible deployment options, including pole mounting and wall mounting, for the NEWFAST AC1200 Outdoor WiFi Repeater.
- Choose a Location: Select a central outdoor location that provides the best line of sight to the areas requiring WiFi coverage. Ensure it is within range of your existing network if operating in Repeater or AP mode.
- Mounting:
- Pole Mount: Use the provided pole straps to secure the device to a pole.
- Wall Mount: Use the provided screws and anchors to fix the device to a wall.
- Connect Power and Data (PoE):
This image illustrates the flexible deployment with PoE, showing how the device can be powered and receive data through a single Ethernet cable connected to the PoE adapter.
Connect an Ethernet cable from the LAN/PoE port of the PoE adapter to the WAN port of the NEWFAST AC1200. Then, connect another Ethernet cable from your router/switch to the WAN port of the PoE adapter. Plug the PoE adapter into a power outlet.
- Verify Connection: Once powered on, observe the LED indicators on the device. The Power LED should be solid green, and the WAN/LAN LEDs should indicate active connections.
3.2 Initial Configuration
To configure the device, you will need to access its web-based management interface.
- Connect to the Device: Connect your computer directly to one of the LAN ports of the NEWFAST AC1200 using an Ethernet cable, or connect to its default WiFi network (SSID and password can be found on the device label or quick start guide).
- Access Web Interface: Open a web browser and enter the default IP address (e.g.,
192.168.10.1or as specified in the quick start guide) in the address bar. - Login: Enter the default username and password (typically
adminfor both, or as specified in the quick start guide). - Follow Setup Wizard: The interface will guide you through the initial setup, including selecting an operating mode, configuring WiFi settings (SSID, password), and network parameters.
4. Operating Modes
The NEWFAST AC1200 supports four main operating modes to suit various networking requirements.
This image displays the various working modes supported by the NEWFAST AC1200, including AP Mode, Bridge Mode, Router Mode, and Repeater Mode, demonstrating its flexible application.
4.1 Access Point (AP) Mode
In AP mode, the device connects to a wired network (e.g., a router or switch) and broadcasts a wireless signal, allowing wireless clients to connect to the wired network. It acts as a central hub for wireless connectivity.
4.2 Repeater Mode
Repeater mode extends the coverage of an existing wireless network. The device receives the wireless signal from your main router and re-broadcasts it, effectively extending the range of your WiFi network to areas with weak or no signal.
4.3 Bridge Mode
Bridge mode allows two wired networks to be connected wirelessly. The device acts as a wireless bridge, enabling devices on one wired network to communicate with devices on another wired network without requiring a physical cable connection between them.
4.4 Router Mode
In Router mode, the device functions as a primary router, connecting to the internet via its WAN port and providing network services (like DHCP, NAT) to connected wired and wireless clients. This mode is suitable for setting up a new network.
4.5 Switching Modes
Operating modes can be selected and configured through the device's web-based management interface. Navigate to the 'Operation Mode' or 'Network Settings' section to choose and apply your desired mode.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your NEWFAST AC1200 device.
- Cleaning: Periodically wipe the exterior of the device with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or aerosols.
- Firmware Updates: Check the NEWFAST official website periodically for firmware updates. Keeping the firmware updated can improve performance, add new features, and fix bugs. Follow the instructions provided with the firmware update carefully.
- Environmental Protection: While the device is IP66 rated for outdoor use, ensure all cable glands are properly tightened to maintain its waterproof integrity. Avoid placing the device in locations prone to direct, prolonged submersion or extreme physical impact.
- Cable Inspection: Regularly inspect Ethernet cables for any signs of wear, damage, or corrosion, especially those exposed to outdoor elements. Replace damaged cables promptly.
6. Troubleshooting
If you encounter issues with your NEWFAST AC1200, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power / Device LEDs Off | Power adapter not connected or faulty; power outlet issue. | Ensure the PoE adapter is properly connected to a working power outlet and to the device. Check the power cable. |
| Cannot Access Web Interface | Incorrect IP address; network configuration issue on PC; device not powered on. | Verify the device's IP address. Ensure your computer's IP settings are compatible (e.g., set to DHCP or a static IP in the same subnet). Try a different browser or clear browser cache. Ensure the device is powered on. |
| No Internet Connection | Incorrect operating mode configuration; WAN cable disconnected; upstream network issue. | Check the operating mode settings in the web interface. Ensure the WAN cable is securely connected. Verify that your main router or modem has internet access. |
| Weak WiFi Signal or Slow Speed | Obstructions; interference; device placement; incorrect channel settings. | Relocate the device to a more open area with fewer obstructions. Change WiFi channels in the web interface to avoid interference. Ensure antennas are properly oriented. |
| Forgot Login Password | Password lost. | Press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. This will restore the device to factory default settings, including the default login credentials. |
7. Specifications
| Feature | Description |
|---|---|
| Brand | NEWFAST |
| Model Number | NF-A882 |
| Wireless Standard | 802.11ac |
| Data Transfer Rate | 1200 Mbps (867Mbps on 5GHz, 300Mbps on 2.4GHz) |
| Frequency Band | Dual-Band (2.4 GHz & 5 GHz) |
| Ethernet Ports | 3 x 10/100/1000Mbps RJ45 (1 WAN, 2 LAN) |
| PoE Support | Yes (PoE Injector included) |
| IP Rating | IP66 Weatherproof |
| Antennas | 2 x 5dBi Omnidirectional External Antennas |
| Operating Modes | Router, Access Point (AP), Repeater, Bridge |
| Compatible Devices | Personal computer, Smartphone, Tablet |
| Color | White |
8. Warranty and Support
NEWFAST products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official NEWFAST website.
If you require technical assistance or have questions not covered in this manual, please contact NEWFAST customer support through the contact information provided on our official website or your purchase platform. Our support team is available to help you with any issues or inquiries.
